GB/T 29068-2012 English PDFUS$439.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 29068-2012: Non-destructive testing -- Guide for industrial computed tomography (CT) system selection Status: Valid
Basic dataStandard ID: GB/T 29068-2012 (GB/T29068-2012)Description (Translated English): Non-destructive testing -- Guide for industrial computed tomography (CT) system selection Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J04 Classification of International Standard: 19.100 Word Count Estimation: 19,131 Quoted Standard: GB/T 12604.2; GB/T 29034 Regulation (derived from): National Standards Bulletin No. 41 of 2012 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the user detection requirements and industrial computed tomography (CT) system parameters and performance indicators correspondence between. This standard provides a set of guidelines to guide the user needs to convert the CT detec GB/T 29068-2012: Non-destructive testing -- Guide for industrial computed tomography (CT) system selection---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Non-destructive testing. Guide for industrial computed tomography (CT) system selection ICS 19.100 J04 National Standards of People's Republic of China Non-destructive testing - Industrial computed tomography (CT) System Selection Guide Non-destructivetesting-Guideforindustrialcomputedtomography (CT) systemselection Issued on. 2012-12-31 2013-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard non-destructive testing by the National Standardization Technical Committee (SAC/TC56) and focal points. This standard was drafted. ICT Research Center, Chongqing University, Chinese Academy of Sciences, Ningbo Branch of Ordnance, Haitai detection technology limited the Division The company, Chongqing really measured Technology Co., Ltd., China Aerospace Science and Technology Group in Southern Machinery Factory. The main drafters of this standard. Liu Fenglin, Nipei Jun, Lu Yanping, Tan Hui, Xuxiang Qun, Huang Song, Wang whole, Zouyong Ning, Zhang Zheng, Wang Jue.IntroductionIndustrial CT system consists of a complex, sophisticated, essential components to match the configuration, it can be used to meet the testing needs of the reconstruction of the image. CT with Household care applications typically demand, suppliers are concerned about the selection of system components to meet the needs of the user detection. Understand the needs of users and CT CT System vendor solutions to update members on the basis of existing equipment to meet specific application requirements is important. This standard is intended to say Ming in the choice of appropriate CT system, and should consider the relationship between specific applications and industrial CT system performance metrics. Non-destructive testing - Industrial computed tomography (CT) System Selection Guide1 ScopeThis standard gives the user needs to detect and industrial computer tomography (CT) system corresponding relationship between the parameters and performance indicators. This standard provides a set of guidelines to guide the user needs to convert the CT detection system metrics and components requirements. The standard recommends that users and potential suppliers to discuss or consult an expert for more information. This standard applies to industrial CT scanning system selection and testing services, and also can be used to guide users of the system proposed CT inspection needs.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 12604.2 Terminology for nondestructive testing radiographic testing GB/T 29034 Non-destructive testing - Industrial computed tomography (CT) Guide3 Terms and DefinitionsTerms and definitions GB/T 12604.2 defined apply to this document.4 Industrial CT technologyIndustrial CT imaging principle see GB/T 29034. Typically, function modules based on industrial CT systems typically include a radiation source systems, detection systems, data acquisition systems, mechanical systems, Control systems, image processing systems, radiation protection system subsystems. Since the various components of industrial CT systems Subsystem choose Fan Surrounded by large, mostly CT system configuration is not the same, it is necessary to understand the characteristics of a system of components, and affect the performance of the subsystem.5 General5.1 Overview Since the object of industrial CT system can detect many kinds of testing requirements are also different, so the industrial CT highly targeted. In the election Before Optional industrial CT systems, the first response to the user to do a detailed analysis to detect objects and inspection needs. Then, according to the demand for industrial The main function and performance of the CT system. Finally, to meet the needs of the case, select the most cost-effective system. Figure 1 shows the general flow of industrial CT selection. Table 1 shows the relationship between the various inspection requirements and CT systems components and subsystems. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 29068-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 29068-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 29068-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 29068-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
