GB/T 28961-2012 English PDFUS$199.00 ยท In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 28961-2012: Automotive diesel -- Two-stage fuel filters for Compression-ignition engines -- Mounting and connecting dimensions Status: Obsolete
Basic dataStandard ID: GB/T 28961-2012 (GB/T28961-2012)Description (Translated English): Automotive diesel -- Two-stage fuel filters for Compression-ignition engines -- Mounting and connecting dimensions Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: T13 Classification of International Standard: 43.060.40 Word Count Estimation: 5,535 Adopted Standard: ISO 7576-1990, MOD Regulation (derived from): National Standards Bulletin No. 41 of 2012 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the automotive diesel fuel filter with a two-stage installation and connection dimensions. This standard applies to automotive diesel fuel with a two-stage filter. GB/T 28961-2012: Automotive diesel -- Two-stage fuel filters for Compression-ignition engines -- Mounting and connecting dimensions---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Automotive diesel. Two-stage fuel filters for Compression-ignition engines. Mounting and connecting dimensions ICS 43.060.40 T13 National Standards of People's Republic of China Two-stage automotive diesel fuel filters Installation and connection dimensions (ISO 7576.1990, Roadvehicles-Two-stagefuelfiltersforcompression- ignitionengines-Mountingandconnectingdimensions, MOD) Issued on. 2012-12-31 2013-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard uses redrafted law revision using ISO 7576.1990 "Road vehicles with a compression ignition engine two-stage fuel filter Installation and connection dimensions " This standard and ISO 7576.1990 and the technical differences for the following reasons. --- ISO 7576.1990 recommended value K value is too small, if calculated by taking the maximum value A, the gap between the two filters only 4mm ~ 5mm, is not conducive to maintenance when removing and installing; based on domestic engine manufacturing units mainly for automotive diesel engines Installation and connection dimensions findings are two-stage fuel filter, adjust the K value (see Table 1). The Type 1 form, the form K 2 value of each type of 90mm and 95mm increase in block two, K 3 types of value in the form of a block 124mm increase, will form Bmax value adjustment 3 type 227. This standard made the following editorial changes. --- Consistent with the existing standard series, the standard name will be changed to "two-stage automotive diesel fuel filter mounting and connecting dimensions." --- Remove Appendix A. International Standards The standard proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This standard by the National Automotive Standardization Technical Committee (SAC/TC114) centralized. This standard was drafted. Bengbu Jinwei Filters Co., Ltd., Zibo Yonghua Filters Manufacturing Co., Ltd., China First Automobile Group Corporation Our technical center, Bengbu Filter Co. prestige. The main drafters of this standard. Li Jianguo, Songpei Qing, Li Yonghua, Cao Lixin, single meme, Zhang. Two-stage automotive diesel fuel filters Installation and connection dimensions1 ScopeThis standard specifies the car with the two-stage diesel fuel filter mounting and connecting dimensions. This standard applies to cars with two-stage diesel fuel filter.2 dimensions and tolerancesDimensions and tolerances shown in Figure 1 and Table 1. Millimeters Withdrawal dimension should include a filter on the manufacturer's drawings. figure 1 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 28961-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 28961-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 28961-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28961-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
