GB/T 28866-2012 English PDF

US$234.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 28866-2012: Characteristic parameters of stand-alone photovoltaic (PV) systems
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 28866-2012	234	Add to Cart	3 days	Characteristic parameters of stand-alone photovoltaic (PV) systems	Valid

Similar standards

GB/T 18912   GB/T 28817   GB/T 20047.1   GB/T 45525.2   GB/T 45021.1   

Basic data

Standard ID: GB/T 28866-2012 (GB/T28866-2012)
Description (Translated English): Characteristic parameters of stand-alone photovoltaic (PV) systems
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K83
Classification of International Standard: 27.160
Word Count Estimation: 12,163
Adopted Standard: IEC 61194-1992, IDT
Regulation (derived from): National Standards Bulletin 2012 No. 28
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard provides for independent photovoltaic system System description and performance analysis of the major electrical, mechanical and environmental parameters. For the acquisition and performance analysis in a standard format to provide the follo

GB/T 28866-2012: Characteristic parameters of stand-alone photovoltaic (PV) systems

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Characteristic parameters of stand-alone photovoltaic (PV) systems ICS 27.160 K83 National Standards of People's Republic of China Parameters independent photovoltaic (PV) system (IEC 61194.1992, IDT) Issued on. 2012-11-05 2013-02-15 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard uses the translation method identical with IEC 61194.1992 "parameters independent photovoltaic (PV) system" (in English). The standard proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This standard by the National Standardization Technical Committee of solar photovoltaic energy systems (SAC/TC90) centralized. This standard was drafted. Inner Mongolia University, Beijing Rijia Power Limited. The main drafters of this standard. Season Binghou, Tian Ji, Blending the. Parameters independent photovoltaic (PV) system

1 Scope

This standard specifies the main electrical, mechanical and environmental parameters for stand-alone PV system performance analysis and system description. To obtain And performance analysis, the following parameters in a standard format. --- Long-term and short-term performance of PV systems field measurements; Comparison of the measured value and site design value --- extrapolated to standard test conditions (STC) of. If desired, for specific application and/or special purpose (design, performance prediction and measurement) of the relevant documents to be published. Note. the application, with diagrams and text in the block diagram represents the minimum requirements given in block diagram outside the recommended optional requirements. E.g. UN nominal voltage of minimum requirements W Weight optional requirement Subentries numbering is arbitrary, but not with the same special data table.

2 PV System Description

2.1 square field Example phalanx field member in Appendix A. 2.1.1 Components Characteristics of the component in the form of a predetermined data table as Peak power Pmax under standard test conditions (STC) of (W) Am total area (including the border) (m2) 2.1.2 plate n the number of board components AP board of the total area (m2) (Including borders, spacing between the reflector assembly, etc.) 2.1.3 phalanx NM number of components Aa total area (m2) 2.1.4 phalanx field Nm Number of components Total square NP PV field plate NP = Nm/n ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 28866-2012_English be delivered?

Answer: Upon your order, we will start to translate GB/T 28866-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 28866-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 28866-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.