GB/T 28766-2018 English PDF

US$599.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 28766-2018: Natural gas -- Performance evaluation for analytical systems
Status: Valid

GB/T 28766: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 28766-2018	599	Add to Cart	3 days	Natural gas -- Performance evaluation for analytical systems	Valid
GB/T 28766-2012	599	Add to Cart	3 days	Natural gas -- Performance evaluation for on-line analytical systems	Obsolete

Similar standards

GB/T 22724   GB/T 26978   GB/T 20368   GB/T 32865   GB/T 33296   

Basic data

Standard ID: GB/T 28766-2018 (GB/T28766-2018)
Description (Translated English): Natural gas -- Performance evaluation for analytical systems
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: E24
Classification of International Standard: 75.060
Word Count Estimation: 30,324
Date of Issue: 2018-09-17
Date of Implementation: 2019-04-01
Older Standard (superseded by this standard): GB/T 28766-2012
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 28766-2018: Natural gas -- Performance evaluation for analytical systems

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Natural gas - Performance evaluation for analytical systems ICS 75.060 E24 National Standards of People's Republic of China Replace GB/T 28766-2012 Natural gas analysis system performance evaluation (ISO 10723.2012, IDT) Published on.2018-09-17 Implementation of.2019-04-01 State Market Supervisory Administration China National Standardization Administration issued

Content

Foreword III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 symbol 3 5 Principle 3 6 General test procedure 4 7 Description 12 Appendix A (informative) Chromatography application example 13 Appendix B (informative appendix) Explanation of instrument evaluation methods 23 Reference 24

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 28766-2012 "Performance Evaluation of Natural Gas Online Analysis System". This standard and GB/T 28766- The main technical changes in.2012 are as follows. --- The word "online" was deleted from the standard name, which expanded the scope of application; --- Revised the scope of the standard; --- Revised the requirements for standard gas for performance evaluation. "The new instrument evaluates at least 7 concentration points, and the gas source is relatively stable. At least 5 concentration points are modified to determine the concentration point according to the type of response function of each composition. linear function 3 concentration points; The order function has 5 concentration points; the third-order function has 7 concentration points. This standard uses the translation method equivalent to ISO 10723.2012 "Performance Evaluation of Natural Gas Analysis System". This standard is proposed and managed by the National Natural Gas Standardization Technical Committee (SAC/TC244). This standard was drafted. China National Petroleum Corporation Southwest Oil and Gas Field Branch Natural Gas Research Institute, Central Asia Pipeline Co., Ltd. Division, China Metrology University, Emerson Process Control Co., Ltd., China National Petroleum Corporation Huabei Oilfield Branch. The main drafters of this standard. Luo Qin, Li Ke, Jiang Jintian, Zhang Hongjun, Zeng Wenping, Zhou Li, Chang Honggang, Wang Huaqing, Pan Jiang, Zhao Rui, Wang Xiaoqin, Zhou Daibing, Xu Zhan, Chen Zixin, Chen Yong. The previous versions of the standards replaced by this standard are. ---GB/T 28766-2012. Natural gas analysis system performance evaluation

1 Scope

1.1 This standard specifies the method for evaluating the suitability of a natural gas analysis system and can be applied to the following situations. a) Determine the evaluation when using a specific calibration gas, subject to the maximum allowable error and uncertainty requirements for composition and/or physical properties The composition range of the sample gas to which the valence method is applicable; b) evaluate instrumental measurements and/or physical properties based on composition when analyzing a given range of gases using a specific calibration gas The error and uncertainty of the number. 1.2 The following conditions are required to use this standard. a) for the category a) evaluation of 1.1, the range of uncertainty acceptable for the compositional measurements and the physical properties calculated accordingly is given explicitly; b) For the b) class evaluation of 1.1, the analysis requirements such as the measured composition and the range of physical property parameters calculated accordingly are clearly given; c) the operational procedures for analysis and calibration are clearly defined; d) Analyze system performance evaluation The composition range of the gas used should be as close as possible to the gas composition variation range common in natural gas transmission and distribution systems. Consistent. 1.3 If the performance evaluation results show that the analysis system does not meet the uncertainty in the required composition content range or the physical property value calculated accordingly Requirements, you can find the reason from the following operating parameters. a) analysis requirements; b) analytical procedures; c) equipment selection; d) calibration gas mixture selection; e) Calculation procedures. Among the above parameters, the choice of the composition of the calibration gas mixture has the greatest influence on the performance evaluation results. 1.4 This standard applies to analytical systems capable of measuring the content of each component in a gas. For example, when applied to calorific value measurement, a typical measurement method The method is gas chromatography, which can measure at least N2, CO2, C1~C5 hydrocarbon components, and a mixed group representing all C6 components. Divided; thus, the calorific value and other physical properties can be calculated within an acceptable accuracy range. In addition, H2S is measured separately by a specific method. This method can also be used to evaluate the measurement results. 1.5 After the initial installation of the analysis system, performance evaluation is required to ensure that the deviations associated with the assumed response function meet the evaluation objectives. Recommended regularly Or perform performance evaluation after debugging or replacing any key components of the analysis system. The interval between two performance evaluations depends on the instrument ringing The conditions that should change over time and the maximum allowable error range, the primary influencing factor is the instrument/operating condition, followed by the instrument field application Therefore, this standard does not provide specific recommendations for the performance evaluation cycle.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. ISO /IEC Guide 98-3.2008 Measurement uncertainty - Part 3. Representation of measurement uncertainty (GUM..1995) [Uncertaintyofmeasurement-Part 3. Guidetotheexpressionofuncertaintyinmeasurement(GUM. 1995)] ISO 6143.2001 Gas analysis to determine and test the comparison of the composition of standard gas mixtures (Gasanalysis-Comparison) ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 28766-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 28766-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 28766-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 28766-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 28766-2018?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 28766-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.