GB/T 28729-2025 English PDFUS$369.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 28729-2025: Nitrous oxide Status: Valid GB/T 28729: Historical versions
Basic dataStandard ID: GB/T 28729-2025 (GB/T28729-2025)Description (Translated English): Nitrous oxide Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G86 Classification of International Standard: 71.100.20 Word Count Estimation: 18,161 Date of Issue: 2025-08-01 Date of Implementation: 2026-02-01 Older Standard (superseded by this standard): GB/T 28729-2012 Issuing agency(ies): State Administration for Market Regulation, Standardization Administration of China GB/T 28729-2025: Nitrous oxide---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT28729-2025ICS 71.100.20 CCSG86 National Standard of the People's Republic of China Replaces GB/T 28729-2012 Nitrous oxide Released on August 1, 2025 Implementation on February 1, 2026 State Administration for Market Regulation The National Standardization Administration issued PrefaceThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 28729-2012 “Nitrogen Oxide”. Compared with GB/T 28729-2012, except for structural adjustments and editorial changes, In addition to the dynamic, the main technical changes are as follows. --- Deleted the content related to the use, molecular formula and relative molecular mass of nitrous oxide in the scope (see Chapter 1,.2012 Edition In Chapter 1 of the Regulations, a description of the use of nitrous oxide in the adipic acid tail gas recovery process for non-medical purposes was added to the scope of application (see Chapter 1); ---Changed the technical requirements table, divided into two tables according to the medical and non-medical uses of nitrous oxide, and increased the non-medical use by 99.9%. The purity requirements for nitrous oxide have been changed, and the limit values for ammonia, nitric oxide and nitrogen dioxide have been added. Seek (see Chapter 4, Chapter 3 of the.2012 edition); --- Added the requirements for nitrous oxide batching (see 5.1); --- Changed the requirements for nitrous oxide sampling and sampling safety (see 5.2, 4.1 of the.2012 edition); --- Changed the sampling requirements for nitrous oxide (see 5.3, 4.1 of the.2012 edition); --- Changed the calculation method of nitrous oxide purity (see 6.1.2, 4.2 of the.2012 edition); --- Added the method for determining the argon content in nitrous oxide (see 6.2); --- Added the determination method of ammonia content, nitric oxide content and nitrogen dioxide content in nitrous oxide (see 6.3); --- Added requirements for exhaust gas treatment (see 6.11); --- Changed the requirements of the inspection rules and added provisions for numerical rounding (see Chapter 7, 4.1 of the.2012 edition); --- Changed the marking requirements (see 8.1, 5.1 and 5.2 of the.2012 edition); --- Changed the labeling requirements (see 8.2, 5.2 of the.2012 edition); --- Changed the provisions on packaging, filling, transportation and storage (see Chapter 9, Chapter 5 of the.2012 edition); --- Changed the safety information of nitrous oxide (see Chapter 10, 5.9 of the.2012 edition). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Petroleum and Chemical Industry Federation. This document is under the jurisdiction of the National Gas Standardization Technical Committee (SAC/TC206). This document was drafted by. Dalian Date Gas Co., Ltd., Fujian Youlite Material Technology Co., Ltd., Chongqing Metrology Quality Inspection Research Institute Research Institute, Fujian Detianchen New Materials Technology Co., Ltd., Chongqing Tonghui Gas Co., Ltd., Jiangsu Huazhong Gas Co., Ltd., China Shipbuilding (Handan) Rui Special Gas Co., Ltd., Haohua Gas Co., Ltd. Southwest Branch, Shanghai Fanwei Instrument Equipment Co., Ltd., China Metrology and Testing Society, China Institute of Metrology, China Industrial Gases Association, Shanghai Huaai Chromatography Analysis Technology Co., Ltd., Air Liquide (China) Investment Co., Ltd., Shenyang Zhongfu Kejin Pressure Vessel Co., Ltd., Modern Science and Technology College of China Jiliang University, Southwest Research and Design Institute of Chemical Industry Limited Company. The main drafters of this document are. Li Fufen, Na Zhaoyu, Hu Delong, Wu Pan, Wu Junhui, Lai Xiaofeng, Cao Suying, Pan Zhenhuan, Fang Hua, Huang Jiadou, Ye Yingheng, Hong Feng, Wang Cheng, Zhu Jiangtao, Zhang Shuai, He Bo, Yang Kang, Yang Yangzhongfu, Chen Yali, Tang Xiamei, Bo Chungan, Zhang Tiqiang, Wang Honghong, Guo Guangyu, Yin Hao, Li Ming, Gong Bing, and Ma Yichun. The previous versions of this document and the documents it replaces are as follows. ---First issued in.2012 as GB 28729-2012 "Nitrous Oxide"; ---This is the first revision. Nitrous oxide1 ScopeThis document specifies the technical requirements for nitrous oxide and the batching, sampling, testing methods, inspection rules, marking, labeling, and accompanying The requirements for documentation, packaging, filling, transportation and storage are described, relevant test methods are described, and safety information for nitrous oxide is provided. This document applies to the medical nitrous oxide obtained by thermal decomposition and purification of ammonium nitrate, the recovery and separation of ammonium nitrate thermal decomposition and adipic acid tail gas The non-medical nitrous oxide is obtained after purification.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB 190 Dangerous Goods Packaging Marking GB/T 191 Pictorial symbols for packaging, storage and transportation GB/T 3634.2 Hydrogen Part 2.Pure hydrogen, high-purity hydrogen and ultrapure hydrogen GB/T 4844 Pure helium, high-purity helium and ultra-pure helium GB/T 5099 (all parts) Steel seamless gas cylinders GB/T 5832.2 Gas analysis - Determination of trace moisture - Part 2.Dew point method GB/T 6388 Shipping and Receiving Marks for Transport Packages GB/T 7144 Color marking of gas cylinders GB/T 8170 Rules for rounding off values and expression and determination of limit values GB/T 8979 Pure nitrogen, high-purity nitrogen and ultra-pure nitrogen GB/T 8984 Gas analysis - Determination of trace carbon monoxide, carbon dioxide and hydrocarbons in gases - Flame ionization Gas chromatography GB/T 11640 Aluminum alloy seamless gas cylinders GB/T 14193 Regulations for filling liquefied gas cylinders GB 15258 Provisions for the Preparation of Chemical Safety Labels GB/T 15382 General technical requirements for gas cylinder valves GB/T 16483 Contents and order of items in safety data sheets for chemicals GB/T 16804 Gas Cylinder Warning Labels GB/T 27550 Safety technical requirements for gas cylinder filling stations GB/T 28054 Seamless steel gas cylinder clusters GB/T 30685 Technical requirements for upright road transport of gas cylinders GB/T 33145 Large volume seamless steel gas cylinders GB/T 34525 Safety regulations for the handling, loading and unloading, storage and use of gas cylinders GB/T 43306 Guidelines for Gas Analysis Sampling HG/T 5896 High Purity Air JT/T 617 (all parts) Rules for the transport of dangerous goods by road ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 28729-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 28729-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 28729-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28729-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 28729-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 28729-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
