GB/T 28700-2012 English PDF

US$649.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 28700-2012: SWZ universal coupling with bearing box
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 28700-2012	649	Add to Cart	5 days	SWZ universal coupling with bearing box	Valid

Similar standards

GB/T 5015   GB/T 5014   GB/T 30819   GB/T 43757   GB/T 39545.4   GB/T 28701   

Basic data

Standard ID: GB/T 28700-2012 (GB/T28700-2012)
Description (Translated English): SWZ universal coupling with bearing box
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J19
Classification of International Standard: 21.120.20
Word Count Estimation: 28,229
Quoted Standard: GB/T 191; GB/T 197; GB/T 1184; GB/T 1800.2; GB/T 3098.1; GB/T 3098.2; GB/T 4879; GB/T 6388; GB/T 7284; GB/T 11345; GB/T 13384; JB/T 5000.1; JB/T 5000.3; JB/T 5000.15
Regulation (derived from): National Standards Bulletin No. 24 of 2012
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the SWZ monolith bearing cross shaft universal coupling of the type, the basic parameters and dimensions, technical requirements, inspection rules, marking, packaging and storage. This standard applies to join two different axes of

GB/T 28700-2012: SWZ universal coupling with bearing box

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS21.120.20 J19 National Standards of People's Republic of China SWZ type integral bearing Cross shaft universal coupling Issued on. 2013-03-01 2012-09-03 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Types, basic parameters and dimensions 1 4. Technical Requirements 19 20 5 Inspection Rules 6 logo, packaging, storage 20 Appendix A (informative) universal coupling selection Description 22

Foreword

This standard rule according to GB/T 1.1-2009 given draft. This standard by the National Standardization Technical Committee of the machine shaft and accessories (SAC/TC109) and focal points. This standard drafting units. China's second Heavy Machinery Group, Machine Productivity Promotion Center, Ltd. Deyang Rieter basis. The main drafters of this standard. Tan Ren Wan, Ming Chui new Liuxue Guang, Zhang Jingang, Chen Xiaofeng, Deng Takami. SWZ type integral bearing Cross shaft universal coupling

1 Scope

This standard specifies the type SWZ overall bearing cross shaft universal coupling (hereinafter referred to as universal coupling) the type, basic parameters And size, technical requirements, inspection rules, marking, packaging and storage. This standard applies to the Department of the universal joint shaft coupling two different axes of its swing diameter of 160mm ~ 550mm, Biography Hands nominal torque is 20kN · m ~ 830kN · m, axis angle of 10 °.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 191 Packing Pictorial marking GB/T 197 common thread tolerance GB/T 1184 shape and position tolerances without individual tolerance value GB/T 1800.2 limits and fits - Part 2. limit deviations of standard tolerance grades and hole axis GB/T 3098.1 Mechanical properties of fasteners Bolts, screws and studs GB/T 3098.2 Mechanical properties of fasteners coarse thread GB/T 4879 rust-proof packaging GB/T 6388 transport package shipping mark GB/T 7284 wooden frame GB/T 11345 steel welds manual ultrasonic testing and classification of testing results GB/T 13384 mechanical and electrical products packaging General technical conditions JB/T5000.1 heavy machinery - General requirements - Part 1. Product Inspection JB/T5000.3 heavy machinery General requirements - Part 3. welded Part 15 JB/T5000.15 Heavy mechanical general techniques. non-destructive testing of steel forgings 3 Types, basic parameters and dimensions Type 3.1 Universal coupling type is divided into seven species in Table 1. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 28700-2012_English be delivered?

Answer: Upon your order, we will start to translate GB/T 28700-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 28700-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 28700-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.