GB/T 2861.5-2008 English PDFUS$189.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 2861.5-2008: Guide unit for stamping dies -- Part 5: Cages Status: Valid GB/T 2861.5: Historical versions
Basic dataStandard ID: GB/T 2861.5-2008 (GB/T2861.5-2008)Description (Translated English): Guide unit for stamping dies -- Part 5: Cages Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J46 Classification of International Standard: 25.120.30 Word Count Estimation: 8,880 Date of Issue: 2008-04-10 Date of Implementation: 2008-10-01 Older Standard (superseded by this standard): GB/T 2861.10-1990 Quoted Standard: GB/T 308; JB/T 8070 Regulation (derived from): National Standard Approval Announcement 2008 No.5 (Total No.118) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the die guide Cage structure, dimensions and markings. This section applies to die guide with Cage. GB/T 2861.5-2008: Guide unit for stamping dies -- Part 5: Cages---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.. Guide unit for stamping dies Part 5. Cages ICS 25.120.30 J46 National Standards of People's Republic of China Replacing GB/T 2861.10-1990 Section 5 die guide. Ball retainer Posted 2008-04-10 2008-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 2861 "die guide" is divided into 11 parts. --- Part 1. die guide slide guide pillar; --- Part 2. Die rolling guide guide guide column; --- Part 3. Die guide slide guide bushings; --- Part 4. guide die rolling guide bushings; --- Part 5. die guide the ball retainer; --- Part 6. die guide cylindrical spiral compression spring; --- Part 7. guide sliding guide die removable guide post; --- Part 8. die guide rolling guide removable guide post; --- Part 9. Die guide bushing; --- Part 10. Die guide washer; --- Part 11. Die guide plate. This section GB/T 2861 Part 5. This Part replaces GB/T 2861.10-1990 "die guide the ball retainer." This section compared with the GB/T 2861.10-1990, main changes are as follows. --- The standard name be changed to "die guide - Part 5. ball retainer ring"; --- Added "preface" and "normative references"; --- Increased ball retainer ring Size; --- Material instead recommended. This section Appendix A normative appendix. This part of the National Standardization Technical Committee mold (SAC/TC33) and focal points. This section is drafted. Guilin Institute of Electrical Science, Guilin University of Electronic Technology, Hangzhou Xiaoshan precision mold standard factory, Zhenjiang Chuanshan Mold factory. The main drafters of this section. WENG Shi Zhen, Liao Wang Yi, Zhang Yuqin, Qi Wei root, Bong double. This part of the standard replaces the previous editions are. --- GB 2861.10-1981; --- GB/T 2861.10-1990. Section 5 die guide. Ball retainer1 ScopeThis section provides a guide die ball retainer structure, dimensions and marking. This section applies to the die guide with ball retainer.2 Normative referencesThe following documents contain provisions which, through reference to GB/T 2861 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 308 Rolling Ball JB/T 8070 die mold parts and technical conditions3 DimensionsSee the ball retainer structure and size specifications Figure 1, Table 1.1 ball retainer......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 2861.5-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 2861.5-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 2861.5-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2861.5-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 2861.5-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2861.5-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
