GB/T 2861.3-2008 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 2861.3-2008: Guide unit for stamping dies -- Part 3: Guide bushes for sliding guide
Status: Valid

GB/T 2861.3: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 2861.3-2008	189	Add to Cart	3 days	Guide unit for stamping dies -- Part 3: Guide bushes for sliding guide	Valid
GB/T 2861.3-1990	199	Add to Cart	2 days	Guide unit for press tools--Guide pillars, type C	Obsolete

Similar standards

GB/T 45677   GB/T 6110   JB/T 3943   GB/T 2861.1   GB/T 2861.2   GB/T 2861.11   

Basic data

Standard ID: GB/T 2861.3-2008 (GB/T2861.3-2008)
Description (Translated English): Guide unit for stamping dies -- Part 3: Guide bushes for sliding guide
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J46
Classification of International Standard: 25.120.30
Word Count Estimation: 8,821
Date of Issue: 2008-04-10
Date of Implementation: 2008-10-01
Older Standard (superseded by this standard): GB/T 2861.6-1990; GB/T 2861.7-1990
Quoted Standard: JB/T 8070; JB/T 8071
Regulation (derived from): National Standard Approval Announcement 2008 No.5 (Total No.118)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the structure of die sliding guide guide guide sleeve, dimensions and markings. This section applies to die with a sliding guide guide guide sleeve.

GB/T 2861.3-2008: Guide unit for stamping dies -- Part 3: Guide bushes for sliding guide

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Guide unit for stamping dies Part 3. Guide bushes for sliding guide ICS 25.120.30 J46 National Standards of People's Republic of China Replacing GB/T 2861.6-1990, GB/T 2861.7-1990 Part 3 die guides. Slide guide bushings Posted 2008-04-10 2008-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 2861 "die guide" is divided into 11 parts. --- Part 1. die guide slide guide pillar; --- Part 2. Die rolling guide guide guide column; --- Part 3. Die guide slide guide bushings; --- Part 4. guide die rolling guide bushings; --- Part 5. die guide the ball retainer; --- Part 6. die guide cylindrical spiral compression spring; --- Part 7. guide sliding guide die removable guide post; --- Part 8. die guide rolling guide removable guide post; --- Part 9. Die guide bushing; --- Part 10. Die guide washer; --- Part 11. Die guide plate. This section GB/T 2861 Part 3. This part is GB/T 2861.6-1990 "die guide bushings type A" and GB/T 2861.7-1990 "punch guide assembly Set B Pilot sets of "consolidated amendments. This part of GB /and GB/T 2861.7-1990 compared to T 2861.6-1990 main changes are as follows. --- The standard name changed to "Part 3 die guides. Slide guide bushings"; --- Added "preface" and "normative references"; --- The guide sleeve and installation into push-bonding two forms; --- Material instead recommended. This part of the National Standardization Technical Committee mold (SAC/TC33) and focal points. This section is drafted. Guilin Institute of Electrical Science, Guilin University of Electronic Technology, Hangzhou Xiaoshan precision mold standard factory, Zhenjiang Chuanshan Mold factory. The main drafters of this section. WENG Shi Zhen, Liao Wang Yi, Zhang Yuqin, Qi Wei root, Bong double. This part of the standard replaces the previous editions are. --- GB 2861.6-1981, GB 2861.7-1981; --- GB/T 2861.6-1990, GB/T 2861.7-1990. Part 3 die guides. Slide guide bushings

1 Scope

This section provides a guide punch guide sleeve sliding guide structure, dimensions and marking. This section applies to the die guide slide guide bushings.

2 Normative references

The following documents contain provisions which, through reference to GB/T 2861 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. JB/T 8070 die mold parts and technical conditions JB/T 8071 to check the accuracy of the die mold

3 Dimensions

3.1 A guide sleeve type A guide sleeve-type slide guide structure and dimensions shown in Figure 1, Table 1. Un surface roughness R Rao 6.3μm. a drive wheel groove is determined by the manufacturer. b pressed into the end allows the use of imported stepped structure. Note 1. The number and size of fuel tank is determined by the manufacturer. Note 2. R determined by the manufacturer. Figure 1 A guide sleeve type ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 2861.3-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 2861.3-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 2861.3-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 2861.3-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 2861.3-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2861.3-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.