GB/T 2861.10-2008 English PDFUS$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 2861.10-2008: Guide unit for stamping dies -- Part 10: Washers Status: Valid GB/T 2861.10: Historical versions
Basic dataStandard ID: GB/T 2861.10-2008 (GB/T2861.10-2008)Description (Translated English): Guide unit for stamping dies -- Part 10: Washers Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J46 Classification of International Standard: 25.120.30 Word Count Estimation: 5,596 Date of Issue: 2008-04-10 Date of Implementation: 2008-10-01 Older Standard (superseded by this standard): GB/T 2861.15-1990 Quoted Standard: JB/T 8070 Regulation (derived from): National Standard Approval Announcement 2008 No.5 (Total No.118) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the structure of die guide washers, dimensions and markings. This section applies to die guide with washers. GB/T 2861.10-2008: Guide unit for stamping dies -- Part 10: Washers---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Guide unit for stamping dies Part 10. Washers ICS 25.120.30 J46 National Standards of People's Republic of China Replacing GB/T 2861.15-1990 Part 10 die guides. washer Posted 2008-04-10 2008-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 2861 "die guide" is divided into 11 parts. --- Part 1. die guide slide guide pillar; --- Part 2. Die rolling guide guide guide column; --- Part 3. Die guide slide guide bushings; --- Part 4. guide die rolling guide bushings; --- Part 5. die guide the ball retainer; --- Part 6. die guide cylindrical spiral compression spring; --- Part 7. guide sliding guide die removable guide post; --- Part 8. die guide rolling guide removable guide post; --- Part 9. Die guide bushing; --- Part 10. Die guide washer; --- Part 11. Die guide plate. This section GB/T 2861 Part 10. This Part replaces GB/T 2861.15-1990 "die guide washer." This section compared with the GB/T 2861.15-1990, main changes are as follows. --- The standard name be changed to "die guide Part 10. Washers"; --- Added "preface" and "normative references"; --- Washers structures and sizes made major changes; --- Material instead recommended. This part of the National Standardization Technical Committee mold (SAC/TC33) and focal points. This section is drafted. Guilin Institute of Electrical Science, Guilin University of Electronic Science and Technology, Zhenjiang Chuanshan mold factory Hangzhou Xiaoshan precision molds standard Quasi Factory. The main drafters of this section. WENG Shi Zhen, Wang Yi Liao Qi Wei root, Zhang Yuqin, Bong double. This part of the standard replaces the previous editions are. --- GB 2861.15-1981; --- GB/T 2861.15-1990. Part 10 die guides. washer1 ScopeThis section defines the structure, dimensions and marking die guide washer. This section applies to the die guide with a gasket.2 Normative referencesThe following documents contain provisions which, through reference to GB/T 2861 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. JB/T 8070 die mold parts and technical conditions3 DimensionsWasher structure and dimensions shown in Figure 1, Table 1. Un surface roughness R Rao 6.3μm. Note No chamfer 1mm × 45 °. Figure 1 washer Table 1 gasket Dimensions in millimeters Screw diameter 6 6.4 123 096 8 8.4 15 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 2861.10-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 2861.10-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 2861.10-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2861.10-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 2861.10-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2861.10-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
