GB/T 28609-2012 English PDFUS$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 28609-2012: Optical functional films -- Polyethylene terephthalate (PET) -- Determination of birefringence Status: Valid
Basic dataStandard ID: GB/T 28609-2012 (GB/T28609-2012)Description (Translated English): Optical functional films -- Polyethylene terephthalate (PET) -- Determination of birefringence Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G15 Classification of International Standard: 71.080.99 Word Count Estimation: 10,127 Adopted Standard: ASTM D4093-1995 (2005), NEQ Regulation (derived from): National Standards Bulletin No. 13 of 2012 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the use of Sena Meng measurement polyethylene terephthalate (PET) film birefringence methods, including determination of principal strain direction and the phase delay of two parts. This standard applies to one-way or two-way stret GB/T 28609-2012: Optical functional films -- Polyethylene terephthalate (PET) -- Determination of birefringence---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Optical functional films. Polyethylene terephthalate (PET). Determination of birefringence ICS 71.080.99 G15 National Standards of People's Republic of China Optically functional film Polyethylene terephthalate (PET) film A birefringence measuring method Polyethyleneterephthalate (PET) - Issued on. 2012-06-29 2012-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard reference method using redrafted ASTMD4093.1995 (Reapproved2005) (English) "transparent or translucent plastic Birefringent material and residual strain photoelastic test methods "preparation, and ASTMD4093.1995 (Reapproved2005) consistency Cheng Degree is not equivalent. This standard ASTMD4093.1995 (Reapproved2005) The main differences are as follows. --- ASTMD4093.1995 (Reapproved2005) in the phase delay film samples over compensation scale range only 6.1.4.3 in a simple introduction, in the optical path and then added a set value compensator, and no detailed instructions, and This standard has been described in detail; --- ASTMD4093.1995 (Reapproved2005) compensation method used, and used in this standard Saina Meng (Senarmont) spin Rotation analyzer method; --- ASTMD4093.1995 (Reapproved2005) using white light source, and this standard uses monochromatic light source; --- ASTMD4093.1995 (Reapproved2005) in another test portion of the inner oblique incidence birefringence involves the use of the mark Registration does not involve the in-plane birefringence; --- ASTMD4093. in 1995 (Reapproved2005) on residual strain of this standard does not address. The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standardization Technical Committee of the optical thin film materials function (SAC/TC431) centralized. This standard was drafted. Hefei Lucky Technology Industry Co., Ltd, China Lucky Film Group Corporation, Lucky Film Co., Ltd. of Tianjin. The main drafters of this standard. Jiaocong Xuan, INTO, Gao Qing, Li Aerospace, Liu province.IntroductionSpeed \u200b\u200bof light in a vacuum is c (3 × 108m/s), in a transparent medium speed is v, v is always less than c, the ratio referred to them Refractive index that the refractive index n = c/v, isotropic material, the refractive index is a constant and the vibration direction of light propagation direction and irrelevant. Big Most glass and plastic materials are isotropic in the absence of stress, the refractive index is the same in all directions. When isotropic material should be subject to Occurs when the force or strain, it will have an anisotropic refractive index to have a direction, this time need to use the three principal refractive indices instead. refraction The rate of change with the size of the strain is related to the refractive index of a transparent material if no strain occurs as n0, after a strain of three principal refractive index ni suffered strain is a linear function. ni-n0 = ΣAijSj Where i = 1,2,3 denote three directions (by Cartesian coordinates X, Y, Z represents), ni represents a refractive index in the three directions, j = 1,2,3 And i represents the same three directions, Sj represents the strain generated in the three directions. In isotropic materials, the two constants A and B Material that is the relationship between strain and the resulting stress anisotropy occurs between. When i = j, Aij = A; When when i ≠ j, Aij = B PET film production process, after the setting by the biaxial stretching, the film plane is set to the XY plane, the film is considered in directions X and Y Stress strain occurs, there is no strain in the Z direction. When polarized light vertical line through the transparent material, the two main strains of the material located in the S1 and S2 This transparent material plane, the incident light The polarization direction of S1 and S2 are inconsistent, this time will be split into two polarized rays respectively S1 and S2 strain direction vibration components, such as v1 and v2 denote two velocity components, compared with the refractive index n1 = C/v1, n2 = C/v2, refractive index difference between the two beams is called the Birefringent material. Δδ = n1-n2 = (AB) × (S1-S2) = K × (S1-S2) Difference in refractive index is proportional to the difference between the two principal strain, K called optical constant strain, it is a constant physical properties, reflecting the performance of the material. by The two beams of light propagation velocity in two different components is no longer synchronized, when through the thickness t of material to form the optical path difference in the two different levels S1 and S2 plane polarized light vibrating inside the line after the relative distance has generated through the material, known as delay (delay amount) R, R by the following formula She said. R = (n1-n2) × t = K × t × (S1-S2) Where. t represents the thickness of the material. Since Δδ = n1-n2 = R/t, so the birefringence can be expressed as the thickness of the material produced by the unit phase delay. There are two purposes birefringence measurement. 1) identify the main strain of the film (ie, the main stress) direction; 2) to determine the size of the delay amount, then obtain the magnitude of birefringence. Using polarized light optical interference, by measuring the optical path difference compensation method. Sena Meng Compensation Law analyzer rotation corresponds to a wavelength of 180 ° phase delay. When a bunch of vertically polarized light incident on the film, will be split into the main strain S1 and S2 direction vibration two beams of polarized light, the two beams N1 and n2 the refractive index of the light and the main strain related. n1-n0 = AS1 B (S1 S2) n2-n0 = AS2 B (S1 S2) Where. n0 is no refractive index when isotropic strain; A and B are constants associated with the material. From the above formula can be drawn. n1-n2 = (AB) × (S1-S2) Refractive index (n1-n2) is birefringent Δδ. Optically functional film Polyethylene terephthalate (PET) film A birefringence measuring method1 ScopeThis standard specifies the polyethylene terephthalate (PET) film birefringence measurement method using Sena Meng method should include determination of the main Change direction and the phase delay of two parts. This standard applies to one-way or two-way stretch technology manufacturing PET film, apply a stretch plastic film manufacturing process may also be other use. Note. This standard only relates to the film surface birefringence, the plane birefringence not considered.2 Terms and definitionsThe following terms and definitions apply to this document. 2.1 Strain strain Deformation generated per unit length, it is divided into the manufacturing process introduced by elastic strain permanent plastic strain and the presence of stress, both of which Strain will produce strain birefringence. 2.2 The optical axis azimuth opticalorientation Master sample and the sample should slow axis direction TD (film manufacturing equipment transmission direction is called MD direction and the direction perpendicular to MD Called TD direction, that is, the angle between the web lateral) direction between. 2.3 Delay amount retardation Light through the spacing between the two wavefront after birefringent material, also known as the relative amount of delay. 2.4 Birefringence birefringence Anisotropic film refractive index, generally by mechanical or thermal strain generated, depending on the refractive index for the spread of the plane of polarization of the light beam orientation and Direction, usually produced by the strain, and the crystal orientation of the material during manufacture of the anisotropic material. It can also be expressed as relative unit thickness delay.3 Test Equipment3.1 micrometer or thickness gauge Micrometer or thickness gauge, test accuracy of 1%. 3.2 Method Sena Meng polarimeter Polarimeter system structure shown in Figure 1. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 28609-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 28609-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 28609-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28609-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
