GB/T 28539-2023 English PDFUS$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 28539-2023: Ophthalmic optics - Contact lenses and contact lens care products - Determination of preservative uptake and release Status: Valid GB/T 28539: Historical versions
Basic dataStandard ID: GB/T 28539-2023 (GB/T28539-2023)Description (Translated English): Ophthalmic optics - Contact lenses and contact lens care products - Determination of preservative uptake and release Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: C40 Classification of International Standard: 11.040.70 Word Count Estimation: 10,185 Date of Issue: 2023-09-07 Date of Implementation: 2024-10-01 Older Standard (superseded by this standard): GB/T 28539-2012 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 28539-2023: Ophthalmic optics - Contact lenses and contact lens care products - Determination of preservative uptake and release---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 11.040.70 CCSC40 National Standards of People's Republic of China Replace GB/T 28539-2012 Ophthalmic optical contact lenses and contact lens care products Determination of preservative uptake and release (ISO 11986.2017,MOD) Published on 2023-09-07 2024-10-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration Committee Table of contentsPreface III Introduction IV 1 Scope 1 2 Normative reference documents 1 3 Terms and Definitions 1 4 Principle 1 5 Test method 1 6 Result expression 2 7 Test report 3 Reference 4ForewordThis document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document replaces GB/T 28539-2012 "Intake and release of preservatives in ophthalmic optical contact lenses and contact lens care products" "Measurement Guide", compared with GB/T 28539-2012, in addition to structural adjustments and editorial changes, the main technical changes are as follows. ---Changed the release time and process (see Chapter 4, Chapter 3 of the.2012 edition); ---Added the requirements for the volume of test fluid and changed the requirements for the number of contact lenses (see 5.1, 4.1 of the.2012 edition); ---Changed the process of extracting the test fluid for the ingestion test (see 5.2, 4.2 of the.2012 edition); ---Changed the process of extracting the standard salt solution for the release test (see 5.3, 4.3 of the.2012 version); ---Added the formula for calculating the preservative intake and release rate. The preservative intake and release amounts in the test report are expressed in "μg/piece" expression, as well as the expression of preservative uptake and release rates in the test report (see Chapter 6, Chapter 5 of the.2012 edition). This document has been modified to adopt ISO 11986.2017 "Preservative uptake and release in ophthalmic optical contact lenses and contact lens care products" Determination". The technical differences between this document and ISO 11986.2017 and their reasons are as follows. ---Replaced ISO 18369-3.2017 with normatively cited GB/T 11417.4 (see Chapter 4, 5.3, ISO 11986.2017 Chapter 4, 5.3), to adapt to my country’s technical conditions; ---Change "maximum diameter -3.00D single vision lens" to "maximum diameter lens (-3.00D or typical application lens)" (See 6.7, 6.7 of ISO 11986.2017); ---Change "reference to this document, namely ISO 11986.2017" to "test basis" and delete "such as hydrogel material group or silicone hydrogel" Identification and surface modification of gluon groups” (see Chapter 7, Chapter 7 of ISO 11986.2017). The following editorial changes have been made to this document. ---"Hydrogel contact lens" is changed to "soft contact lens" (see 5.2.1, 5.2.1.1 and 5.2.1.2 of ISO 11986.2017). Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents. This document is proposed and managed by the National Medical Products Administration. This document was drafted by. Zhejiang Medical Device Inspection Institute. The main drafters of this document. Xu Pinghua, Zhang Li, Xu Chang, Bao Jiaohui, Luo Yongjie, Xia Zhongcheng, Chen Jingyun, Zhu Dan. The previous versions of this document and the documents it replaces are as follows. ---First published as GB/T 28539-2012 in.2012; ---This is the first revision.IntroductionThis document is consistent with GB/T 11417 "Ophthalmic Optical Contact Lenses" and GB/T 28538 "Ophthalmic Optical Contact Lenses and Contact Lens Care Products" Rabbit Eye Compatibility Research Test" together constitute a series of national standards for contact lenses. Contact lens care products are complex mixtures of organic and inorganic substances. For microbiological safety reasons, contact lens disinfectants and Care products in multipurpose containers contain antibacterial active substances. Based on many years of experience wearing contact lenses, we know that due to the absorption of the contact lens matrix, These preservatives are absorbed and released, sometimes causing irritation and sensitization problems. Therefore, it is necessary to evaluate the extent of preservative uptake and release from contact lenses. to evaluate. The Preservative Uptake and Release Test provides a means of measuring preservative uptake by contact lenses in solution and preservative release by contact lenses in aqueous media. general method of administration. Analytical methods for quantification of specific preservatives are not specified here. When selecting an appropriate analytical method, consider preservatives. The chemical identity of the agent, its concentration in contact lens care products, and the extent of contact lens ingestion. Contact lens uptake and release data are used to characterize The possibility of toxic or irritant reactions from potential new or modified contact lens materials derived from currently marketed contact lens materials Ingesting, binding or releasing preservatives in lens care products. Ophthalmic optical contact lenses and contact lens care products Determination of preservative uptake and release1 ScopeThis document specifies general procedures for the selection of test methods, sample preparation and experimental guidance for preservative uptake and release from contact lenses. This document applies to testing of preservative uptake and release from contact lenses and contact lens care products. Note 1.Due to the difficulty of dealing with the inorganic and organic deposits covering contact lenses that are encountered during wear, these methods are only applicable to new and unused lenses. of contact lenses. Note 2.The disinfection effect of contact lenses may be affected when preservatives are consumed within the limited volume of the lens case. This document does not measure disinfection effectiveness.2 Normative reference documentsThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document. GB/T 11417.4 Ophthalmic optical contact lenses Part 4.Standard salt solution for testing (GB/T 11417.4-2012, ISO 18369-3. 2006,NEQ)3 Terms and definitionsThere are no terms or definitions to be defined in this document.4 PrinciplesSoak the contact lens under test in the test solution at 25℃±2℃, and analyze the preservative content at specified intervals until it reaches a stable state. After reaching a stable state, soak the lenses in a standard salt solution that meets the requirements of GB/T 11417.4 at a ratio of 1mL per piece. , soak at 37℃±2℃ at different time intervals until 16h, and analyze the preservative content extracted at each time point in the solution. Analyze until no additional preservative release is observed.5 Test methods5.1 General Before the assessment, the following information should be obtained. a) The selected test method is suitable for the determination and estimation of the specific preservative; Note 1.For examples of methods applicable to the analysis of certain preservatives, see Pharmacopoeia of the People's Republic of China, Part 2. b) The selected test method has the required repeatability and reproducibility, and the applicable analytical detection limit; c) The measurement quantity required to meet the requirements specified in b); Note 2.When the analytical results are close to the detection limit and/or the precision of the analytical method is low, multiple determinations may be required. d) Determine the criteria for reaching equilibrium during the extraction process; ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 28539-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 28539-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 28539-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28539-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 28539-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 28539-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
