GB/T 28512-2012 English PDF

US$1879.00 · In stock
Delivery: <= 13 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 28512-2012: Diameter base protocol for IP network
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 28512-2012	1879	Add to Cart	13 days	Diameter base protocol for IP network	Valid

Similar standards

JT/T 1076   YD/T 2554.1   GB/T 9771.1   GB/T 44270   GB/T 44266   GB/T 28516   

Basic data

Standard ID: GB/T 28512-2012 (GB/T28512-2012)
Description (Translated English): Diameter base protocol for IP network
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: M32
Classification of International Standard: 33.040.40
Word Count Estimation: 85,847
Quoted Standard: IETF RFC 2030; IETF RFC 2234; IETF RFC 2246; IETF RFC 2279; IETF RFC 2284BIS; IETF RFC 2407; IETF RFC 2409; IETF RFC 2474; IETF RFC 2486; IETF RFC 2865; IETF RFC 2915; IETF RFC 2960; IETF RFC 3539; IEEE 754-1985; ISO/IEC IS 10646-1
Adopted Standard: IETF RFC 3588-2003, MOD
Regulation (derived from): National Standards Bulletin No. 13 of 2012
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the Diameter protocol architecture, Diameter basic functions, Diameter base protocol communication mode, Diameter base protocol signaling processes, and other aspects of security requirements. This standard applies to IP networks A

GB/T 28512-2012: Diameter base protocol for IP network

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Diameter base protocol for IP network ICS 33.040.40 M32 National Standards of People's Republic of China Diameter base protocol for IP networks (IETFRFC3588.2003, DiameterBaseProtocol, MOD) Issued on. 2012-06-29 2012-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions, abbreviations 1 3.1 Terms and definitions 3.2 Acronyms 5 Architecture 4 Diameter of 5 4.1 Diameter and overall framework agreement outlines 5 Function 4.2 Diameter base protocol Overview 7 4.3 Diameter concepts Interpretation 7 4.4 Diameter Transfer Protocol 11 4.5 Diameter encrypted message 12 4.6 Diameter 12 compliant applications 4.7 Diameter routing authorization 12 5 Diameter protocol format 13 5.1 DiameterHeader 13 5.2 DiameterAVP 16 6 Diameter peer communication mode 27 6.1 Connection established 27 6.2 pairs of peer discovery mechanism 27 6.3 Capability exchange 28 6.4 pairs peer connection Demolition 30 6.5 transmission error detection 31 6.6 pairs of peer state machine 32 7 Diameter protocol process 36 7.1 Diameter message processing 36 7.2 Diameter error handling 42 7.3 Diameter user session 48 8 Diameter accounting 61 8.1 server is pointing to model 61 8.2 protocol message 61 8.3 pairs of extended application standard documentation requirements 61 62 8.4 Error Recovery 8.5 billing records 62 The relationship between accounting records 62 8.6 8.7 Accounting Command code 63 8.8 Accounting AVPs 64 9 Diameter security mechanisms 66 9.1 IPsec uses 66 9.2 TLS use 67 9.3 pairs end-peer and other considerations 67 Appendix A (normative appendix) Diameter application extension 69 A.1 NAS application expansion requirements 69 A.2 Mobile IP application expansion requirements 69 A.3 SIP application extension requires 70 A.4 EAP application expansion requirements 70 A.5 Extended Credit Control Application Requirements 71 AVP Appendix B (normative) defined in Table 72 B.1 underlying protocol command AVP Table 72 B.2 accounting AVP Table 73 Appendix C (Normative Appendix) Diameter protocol configuration parameters 75 Appendix D (Informative Appendix) Diameter service template 76 Appendix E (Informative Appendix) NAPTR Example 78 Annex F (informative) duplicate detection 79

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This revised standard adopts IETFRFC3588.2003 "Diameter base protocol." The main difference between this standard as follows. --- According to Chinese customs for some formatting modified; some of the statements apply to international standards to apply to our standard Quasi-expression; --- According to GB/T 1 series of requirements, an increase in Chapter 1, Chapter 2 and Chapter 3, in which 3.1 terms and definitions are from IETFRFC3588 1.3; --- The standard 4.3.1,4.3.2,4.3.3,4.3.4,4.3.5,4.5 and 4.6, respectively, equivalent to 2.4 IETFRFC3588, 2.5,2.8,2.6,2.7,2.2 and 2.3; --- The standard 4.4 From the technical content of 2.1 IETFRFC3588 maintain consistency; --- The standard 5.1 and 5.2, respectively, equivalent to IETFRFC3588 of Chapters 3 and 4; --- Chapter 6 of this standard is equivalent to IETFRFC3588 Chapter 5; --- The standard of 7.1, 7.2 and 7.3, respectively, equivalent to IETFRFC3588 Chapter 6, Chapter 7, Chapter 8; --- The standard of Chapters 8 and 9, respectively, equivalent to IETFRFC3588 Chapter 9 and Chapter 13; --- The standard of Appendices B and C, respectively, equivalent to IETFRFC3588 of Chapter 10 and Chapter 12; --- The standard Appendix D, Appendix E and F, respectively, equivalent to IETFRFC3588 of AppendixA, AppendixB, AppendixC; --- 4.1,4.2,4.7 this standard, Appendix A, according to China's actual situation of their own to write. The standard proposed by the Ministry of Industry and Information Technology of the People's Republic of China. The standard by the China Communications Standards Association. This standard was drafted. the Ministry of Industry and Information Technology and Telecommunications Research Institute. The main drafters of this standard. Xie Wei, Liu Qing, Wu Jing, Liu said, ginger Lvliang. Diameter base protocol for IP networks

1 Scope

This standard specifies the Diameter protocol architecture, the basic functions of Diameter, Diameter base protocol communication mode, Diameter base protocol signaling aspects of process and security requirements. This standard applies to IP network AAA (authentication, authorization and accounting) systems and related equipment AAA.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. IETFRFC2030 Simple Network Time Protocol (SNTP) Version 4 (SimpleNetworkTimeProtocol (SNTP) Version4) IETFRFC2234 extended BNF syntax specification. ABNF (AugmentedBNFforSyntaxSpecifications. ABNF) IETFRFC2246 Transport Layer Security (TLS) protocol version 1 (TheTLSProtocolVersion1.0) IETFRFC2279 UTF-8, ISO 10646 transformation formats (UTF-8, atransformationformatofISO 10646) IETFRFC2284bis PPP Extensible Authentication Protocol (EAP) (PPPExtensibleAuthenticationProtocol (EAP)) IETFRFC2407 for ISAKMP IPSec domain of translation (IPSecDOI) (TheInternetIPSecurityDomain ofInterpretationforISAKMP) IETFRFC2409 Internet Key Exchange (IKE) (TheInternetKeyExchange (IKE)) IETFRFC2474 IPv4 IPv6 header Differentiated Services Field (DS Field) and the definition (Definitionofthe DifferentiatedServicesField (DSField) intheIPv4andIPv6Headers) IETFRFC2486 Network Access Identifier (TheNetworkAccessIdentifier) IETFRFC2865 remote authentication dial-user service (RADIUS) (RemoteAuthenticationDialInUser Service (RADIUS)) IETFRFC2915 naming authority point DNS resource records (TheNamingAuthorityPointer (NAPTR) DNS ResourceRecord) IETFRFC2960 Stream Control Transmission Protocol (StreamControlTransmissionProtocol) IETFRFC3539 authentication, authorization, and accounting (AAA) - Transport Profile (Authentication, Authorizationand Accounting (AAA) TransportProfile) IEEE754-1985 binary floating-point arithmetic (BinaryFloating-PointArithmetic) ISO /IEC IS10646-1 Information technology - Universal Multiple-octet (Multiple-Octet) coded character set (Information Technology-UniversalMultiple-OctetCodedCharacterSet) 3 Terms and definitions, abbreviations 3.1 Terms and Definitions The following terms and definitions apply to this document. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 28512-2012_English be delivered?

Answer: Upon your order, we will start to translate GB/T 28512-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 9 ~ 13 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 28512-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 28512-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.