GB/T 28509-2012 English PDF

US$719.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 28509-2012: Ultrafine coaxial cables with insulation diameter below 1mm and cable assemblies
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 28509-2012	719	Add to Cart	6 days	Ultrafine coaxial cables with insulation diameter below 1mm and cable assemblies	Valid

Similar standards

YD/T 1092   YD/T 2165   GB/T 15279   GB/T 44816.2   GB/T 43699   GB/T 43506   

Basic data

Standard ID: GB/T 28509-2012 (GB/T28509-2012)
Description (Translated English): Ultrafine coaxial cables with insulation diameter below 1mm and cable assemblies
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: M42
Classification of International Standard: 33.040.50
Word Count Estimation: 31,381
Quoted Standard: GB/T 2951.13-2008; GB/T 6995.2-2008; GB/T 8815-2008; GB/T 11327.1-1999; GB/T 17737.1-2000; GB/T 17738.1-1999; GJB 360A-1996; GJB 1215A-2005; SJ/T 11363; SJ/T 11365
Regulation (derived from): National Standards Bulletin No. 13 of 2012
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the insulation diameter less than 1 mm of fine coaxial cable (hereinafter referred to as cable) and components (hereinafter referred to as assembly) requirements, test methods, inspection rules, marking and packaging requirements.

GB/T 28509-2012: Ultrafine coaxial cables with insulation diameter below 1mm and cable assemblies

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS33.040.50 M42 National Standards of People's Republic of China Micro coaxial insulated outer diameter of 1mm or less Cable & Components Issued on. 2012-10-01 2012-06-29 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Product Category 1 4.1 Cable 1 4.2 Component 4 5 Requirements 5 5.1 Cable 5 5.2 assembly 11 6 Test methods 14 6.1 General Description 14 6.2 Cable Test Method 14 6.3 Component Test Method 17 7 Inspection rules 20 7.1 Inspection classification 20 7.2 cable inspection requirements 20 7.3 component inspection requirements 21 8 packing, packaging and marking, product certification, transportation and storage 22 8.1 Packaging, logo, product certification 22 8.2 Transport 23 8.3 Storage 23 9 Installation and use requirements 23 Appendix A (normative) cable insulation technical requirements 24 Appendix B (normative) cable sheathing material technical requirements 25 Annex C (informative) Capacitance engineering reference value 26 Annex D (normative) Cable assemblies commonly used model specifications and code 27

Foreword

This standard rule according to GB/T 1.1-2009 given draft. The standard proposed by the Ministry of Industry and Information Technology of the People's Republic of China. The standard by the China Communications Standards Association. This standard was drafted. China Putian Information Industry Co., Ltd., Huawei Technologies Co., Ltd., Beijing Tong and beneficial telecommunication science and technology Institute Ltd surgery. The main drafters of this standard. Generation Kang Xiao Biao, Zhang, Longyong will, mannitol, Deng Qinglong, Victor. Micro coaxial insulated outer diameter of 1mm or less Cable & Components

1 Scope

This standard specifies the insulating outer diameter of 1mm or less fine coaxial cable (hereinafter referred to as cable) and component (hereinafter referred to as components) to Requirements, test methods, inspection rules, signs and packaging requirements. This standard applies to communication equipment or similar electronic device operating frequency range between equipment or between internal module DC ~ 6000MHz Connecting cable and thus type cable connector assembly consisting of a short distance.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2951.13-2008 and optical cables - Common test methods for insulating and sheathing materials - Part 13. General test method Density Determination of water absorption tests - Shrinkage test (IEC 60811-1-3.2001, IDT) GB/T 6995.2-2008 wire and cable identification methods - Part 2. Standard colors GB/T 8815-2008 wire and cable with a soft PVC GB/T 11327.1-1999 PVC insulated low-frequency telecommunication cables and wires - Part 1. General test and measurement Volume method (IEC 60189-1. 1986, NEQ) GB/T 17737.1-2000 frequency cables - Part 1. Generic specification - General, definitions, requirements and test methods (IEC 61196-1. 1995, IDT) GB/T 17738.1-1999 RF coaxial cable assemblies - Part 1. Generic specification - General requirements and test methods (IEC 60966-1. 1988, IDT) GJB360A-1996 test methods for electronic and electrical component GJB1215A-2005 RF cable assemblies - Generic specification SJ/T11363 electronic information products of toxic and hazardous substances in requirements SJ/T11365 Electronic Information Products Testing methods for hazardous substances

3 Terms and Definitions

Terms and definitions GB/T 17737.1-2000 and GB/T 17738.1-1999 defined in this document apply.

4 Products

4.1 Cable 4.1.1 Cable Type Cable Type by the type code, two-part specification code. Type the code shown in Table 1, Table 2 specification code. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 28509-2012_English be delivered?

Answer: Upon your order, we will start to translate GB/T 28509-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 28509-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 28509-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.