GB/T 28032-2011 English PDFUS$299.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 28032-2011: The copolymer used to toner for electrostatic copier Status: Valid
Basic dataStandard ID: GB/T 28032-2011 (GB/T28032-2011)Description (Translated English): The copolymer used to toner for electrostatic copier Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G31 Classification of International Standard: 37.100.01; 37.100.20 Word Count Estimation: 13,181 Date of Issue: 2011-10-31 Date of Implementation: 2012-02-01 Quoted Standard: GB/T 601-2002; HG/T 3872-2006; JB/T 8262.1-1999 Regulation (derived from): Announcement of Newly Approved National Standards No. 15 of 2011 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the electrostatic imaging toner resin (hereinafter referred to as resins) technical requirements, test methods, inspection rules and signs, packaging, transport and storage. This standard applies to vinegar from styrene and acrylic acid and other monomers by polymerization of electrostatic imaging toner resin. GB/T 28032-2011: The copolymer used to toner for electrostatic copier---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.The copolymer used to toner for electrostatic copier ICS 37.100.01; 37.100.20 G31 National Standards of People's Republic of China Electrostatic imaging toner resin Issued on. 2011-10-31 2012-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThe standard proposed by China Machinery Industry Federation. This standard by the national copying machine Standardization Technical Committee (SAC/TC147) centralized. This standard was drafted. Tianjin Institute of plastics industry, machinery industry, inspection and office automation equipment, Wuxi Guidant magnetic powder Ltd., Wuhan Gerun Chemical Co., Ltd., Tianjin Institute of Technology copying. The main drafters of this standard. Wangxue Hui, Liu Huiling, Zhou Xueliang, Wang Hubiao Su to spring. Electrostatic imaging toner resin1 ScopeThis standard specifies the electrostatic images with the toner resin (hereinafter referred to as resin) technical requirements, test methods, inspection rules and signs, packaging, Transport and storage. This standard applies to styrene and acrylic esters and other monomers polymerized toner electrostatic images obtained with a resin.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. Preparation of GB/T 601-2002 Chemical Reagent standard titration solution Determination of average molecular weight and distribution polystyrene standards HG/T 3872-2006 Volume Exclusion Chromatography Dry toner caking temperature test method JB/T 8262.1-1999 xerography3 TermsThe following terms and definitions apply to this standard. 3.1 The glass transition temperature grasstransitiontemperature Amorphous or semi-crystalline polymer from a viscous flow state or a high elastic state (rubbery state) to the glass transition (transition or vice versa) is called the glass transition Variable, i.e., it corresponds to the transition temperature is a glass transition temperature, referred to as the glass transition temperature. 3.2 Softening temperature softeningtemperture Resin softening temperature deformation of. 3.3 Volatile volatilecontent Easy resin containing some amount of volatile matter. 3.4 Melt Index meltindex At a certain temperature and load, every 10min polymer melt through the quality of the required standards die. 3.5 Intrinsic viscosity characterviscosity Also known as the limit viscosity, viscosity at infinite dilution or logarithmic viscosity limits. 3.6 Residual monomers residualmonomercontent Resin residual unreacted monomers. 3.7 Acid value acidvalue The number of milligrams of potassium hydroxide per 1g resin containing an organic acid consumed. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 28032-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 28032-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 28032-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28032-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
