GB/T 28024-2011 English PDFUS$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 28024-2011: Determination of sensory odour for products with filling materials Status: Valid
Basic dataStandard ID: GB/T 28024-2011 (GB/T28024-2011)Description (Translated English): Determination of sensory odour for products with filling materials Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: W59 Classification of International Standard: 59.080.99 Word Count Estimation: 6,665 Date of Issue: 2011-10-31 Date of Implementation: 2012-02-01 Quoted Standard: GB/T 7568.2; GB 18383; GSB 16-2523 Regulation (derived from): Announcement of Newly Approved National Standards No. 15 of 2011 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the wadding odor detection methods. This standard applies to products with wadding, also refer to the use of other textile products. GB/T 28024-2011: Determination of sensory odour for products with filling materials---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Determination of sensory odours for products with filling materials ICS 59.080.99 W59 National Standards of People's Republic of China With wadding odor measurement Issued on. 2011-10-31 2012-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard is proposed and managed by China Fiber Inspection Bureau. This standard was drafted. National Fiber Quality Supervision and Inspection Center, Chongqing fiber fabric inspection by the national textile and apparel product quality Supervision and Inspection Center (Guangzhou). The main drafters of this standard. Zhou Shuo, Wang Qian, Qin Yan Hua Yong, Feng Wen, Liu Wenli, Guo Mountain. With wadding odor measurement1 ScopeThis standard specifies the products with wadding odor detection methods. This standard applies to products with wadding, textile products may also refer to other use. NOTE. The standard refers to the odor GB 18383 standards referred to smell.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 7568.2 Textiles Tests for color fastness standard adjacent fabrics - Part 2. cotton and viscose fibers GB 18383 with wadding General technical requirements GSB16-2523 fiber and fiber products odor standard samples3 Terms and DefinitionsTerms and definitions defined in GB 18383 apply to this document. Principle 4 A certain amount of products with wadding, placed in sealed containers and tasteless, balance a certain time at a predetermined temperature conditions, inspectors olfactory After the smell, the smell of the kind referred to according to judge whether there is smell.5 Equipment and Materials5.1 thermostat. temperature of 40 ℃ ± 3 ℃. 5.2 odorless container. glass or metal, the volume of about 2L, can be sealed. 5.3 micro pipette. 25μL. 5.4 odor standard samples. should comply with the provisions of GSB16-2523. 5.5 cotton adjacent fabric. shall comply with GB/T 7568.2 regulations. 5.6 Gloves. tasteless.6 detects the environmentIn normal temperature and pressure, odorless, non-ventilated detected within a clean environment.7 inspectorsTesting personnel should be in good health, smell normal, no smoking, no alcohol. Do not use the pre-test day with the smell of cosmetics or skin care products, testing ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 28024-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 28024-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 28024-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28024-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |