GB/T 27970-2011 English PDFUS$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 27970-2011: Test method for weight loss of non-metallic gasket materials upon exposure to elevated temperatures Status: Valid
Basic dataStandard ID: GB/T 27970-2011 (GB/T27970-2011)Description (Translated English): Test method for weight loss of non-metallic gasket materials upon exposure to elevated temperatures Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Q69 Classification of International Standard: 23.100.60 Word Count Estimation: 6,661 Date of Issue: 2011-12-30 Date of Implementation: 2012-10-01 Regulation (derived from): Announcement of Newly Approved National Standards No. 23 of 2011 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the gasket material at different temperatures LOI test methods. This standard applies to non-metallic gasket materials LOI side fixed. This standard does not apply to binder content. GB/T 27970-2011: Test method for weight loss of non-metallic gasket materials upon exposure to elevated temperatures---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Test method for weight loss of non-metallic gasket materials upon exposure to elevated temperatures ICS 23.100.60 Q69 National Standards of People's Republic of China Non-metallic gasket materials Loss on Ignition Test Method Issued on. 2011-12-30 2012-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard corresponds to ASTMF495-99a (2004 confirmation) "gasket material loss on ignition test methods", its technical content are basically the same. This standard ASTMF495-99a (2004 confirmed) compared to locally made the following modifications. --- Chapter 1, "scope" of the re-write the 1.1, 1.2, 1.3 and 1.4 is deleted. --- The second chapter, "This standard does not apply to the determination of the binder content." Placed in Chapter 1; deleted 1.2 "in International Units Is the standard notation in brackets given for reference only, "and deleted all given in brackets in the text of the standard Imperial units and value; --- Removed 1.3,1.4 description of the risk and safety, as a warning on the front of the standard; --- Deleted the Chapter 3, "meaning and purpose" and Chapter 11, "Image." The standard proposed by China Building Materials Federation. The standard and non-metallic mineral products by the National Standardization Technical Committee (SAC/TC406) centralized. This standard was drafted. Zhejiang Cathay Pacific sealing materials Co., Ltd., Zhoushan seamounts sealed Material Co., Ltd., Xianyang non-metallic minerals Research and Design Institute Co., Ltd., China Mallorca (Shanghai) Co., Ltd., China National Institute of Standardization, riders Liangshan Auto Parts Manufacturing Co., the company. The main drafters of this standard. HEZE Wu Yimin, Sun Jinlong, Shizhong Tang, Feng Mei, Liu Tao, Zhang Zhongdong, Shang Xingchun, Hou color red. Non-metallic gasket materials Loss on Ignition Test Method Warning. This standard may contain hazardous materials, operations and equipment. This standard does not address safety issues associated with their use. this Standard users have a responsibility to take appropriate safety and health practices and regulatory limitations prior to use to determine the scope of application.1 ScopeThis standard specifies the test methods for gasket materials under different temperatures of the loss on ignition. This standard applies to non-metallic gasket materials burn Determination of loss. This standard does not apply to the determination of the content of adhesives used.2 test device2.1 Muffle furnace. capable of maintaining a temperature range from 315 ℃ ~ 815 ℃, the accuracy of ± 5 ℃. 2.2 porcelain crucible. 2.3 Analytical balance. accuracy 0.01g. 2.4 dryer. containing anhydrous calcium chloride or silica gel. 2.5 air circulation oven. can be maintained at 100 ℃ ± 2 ℃.3 SampleSample mass 5g ~ 10g. Specimens should be cut no more than 12.7mm × 12.7mm square.4 Sample adjustmentBake good specimen cut or crushed into a crucible placed in an air circulating oven at 100 ℃ 1h, then placed in a desiccator to cool down 21 ℃ ~ 30 ℃.5 Number of testsCut sample taken from the same individual specimen, and make at least three tests were averaged, except otherwise agreed by both parties.6 Test Procedure6.1 Clean crucible at a predetermined temperature heating 30min, and then into the dryer to cool to 21 ℃ ~ 30 ℃, the analysis of the balance Weighing, denoted by W1. Samples were adjusted by 5.1 6.2 put in a crucible, and the crucible was weighed sample, denoted as W2. 6.3 sample placed in a crucible and a given temperature muffle furnace burning 60min ± 1min, out into the dryer to cool to 21 ℃ ~ 30 ℃, Weigh the crucible and the sample, referred to as W3. For the test of 815 ℃, the sample from the initial combustion in the crucible to the combustion is completed. Use exhaust hood. NOTE. Before crucible placed in a muffle furnace, if the sample burned most organic life muffle furnace heating element will be greatly extended. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 27970-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 27970-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 27970-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 27970-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
