GB/T 27924-2011 English PDFUS$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 27924-2011: Sizes and load ratings for industrial rack Status: Valid
Basic dataStandard ID: GB/T 27924-2011 (GB/T27924-2011)Description (Translated English): Sizes and load ratings for industrial rack Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J83 Classification of International Standard: 53.080 Word Count Estimation: 11,179 Date of Issue: 2011-12-30 Date of Implementation: 2012-05-01 Quoted Standard: GB/T 18354 Regulation (derived from): Announcement of Newly Approved National Standards No. 23 of 2011 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the dimensions of industrial shelves series and rated load. This standard applies to tray- loading unit, unit load of not more than 2t assembled industrial shelves, including automated warehouse shelves, narrow aisle pallet racking, pallet racking general, driving people shelves, mobile shelves, gravity rack, pressure people shelves and so on. GB/T 27924-2011: Sizes and load ratings for industrial rack---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Sizes and load ratings for industrial rack ICS 53.080 J83 National Standards of People's Republic of China Industrial shelves Size rated load Issued on. 2011-12-30 2012-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Industrial Shelf size 1 4.1 Shelf system size 1 Column 2 4.2 Dimensions 4.3 column size 3 4.4 beam size 4 5 rated load Series 4 Reference 6ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard of the National Logistics Standardization Technical Committee (SAC/TC269) and focal points. This standard was drafted. Flying Nanjing-storage equipment Engineering Co., Ltd., Beijing University of Technology, Institute of Logistics, Jiangsu six-dimensional logistics equipment Industrial Co., Ltd., Shanghai tripod Tiger Industrial Equipment Co., Ltd., Dongguan City of the Logistics System Equipment Co., Ltd., Nanjing MasterCard logistics equipment Manufacturing Co., Ltd., Nanjing-fly shelf Manufacturing Co., Ltd. The main drafters of this standard. Jinyue Yue, Wang turn, Zhaode Ping, money filial Gang, Wang Shixiang, Zhou Tao Pei Chao, Tan Ying, Xu Xiaorun. Industrial shelves Size rated load1 ScopeThis standard specifies the dimensions of industrial shelving series and rated load. This standard applies to tray-loading unit, unit load does not exceed 2t assembled industrial shelves, including automated warehouse goods Racks, narrow aisle pallet racking, general-purpose tray shelves, into the shelves, mobile shelves, gravity-shelf, pressure-in shelves.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 18354 Logistics term3 Terms and DefinitionsGB/T 18354 and defined by the following terms and definitions apply to this document. 3.1 Industrial shelves industrialrack By the sheet column, beam (or cantilever) and other bearing member composed primarily used to store shelves. 3.2 Column sheet columnframework By the columns, bracing and crossbars steel frame body composition. 3.3 Column column Shelf vertical carrier member. 3.4 Crossbeam crossbeam Mounted on two adjacent upper (shelf) column sheet, and directly bear the main member vertical loads. 3.5 Izod cantileverbeam Mounted on the same (shelf) column sheet, and directly bear the main member vertical loads.4 Industrial shelves Dimensions4.1 Shelf system size Shelf system dimensions shown in Figure 1. Wherein, H0 is the bottom shelf height, H1 as cargo cell height, L is the length of the cargo net grid. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 27924-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 27924-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 27924-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 27924-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
