GB/T 27863-2011 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 27863-2011: Packaging for dangerous goods -- The requirement for impact surface of impact test by dropping
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 27863-2011	229	Add to Cart	3 days	Packaging for dangerous goods -- The requirement for impact surface of impact test by dropping	Valid

Similar standards

GB 30000.1   GB/T 28577   GB 30000.10   GB/T 27854   GB/T 27855   GB/T 27853   

Basic data

Standard ID: GB/T 27863-2011 (GB/T27863-2011)
Description (Translated English): Packaging for dangerous goods -- The requirement for impact surface of impact test by dropping
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: A80
Classification of International Standard: 13.300
Word Count Estimation: 10,186
Date of Issue: 2011-12-30
Date of Implementation: 2012-08-01
Quoted Standard: GB/T 4857.5
Regulation (derived from): Announcement of Newly Approved National Standards No. 23 of 2011
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the transport of dangerous goods packaging drop test shock machine performance requirements. This standard applies to the transport of dangerous goods packaging used in the drop test the impact of Taiwan.

GB/T 27863-2011: Packaging for dangerous goods -- The requirement for impact surface of impact test by dropping

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Packaging for dangerous goods. The requirement for impact surface of impact test by dropping ICS 13.300 A80 National Standards of People's Republic of China Dangerous goods packaging drop test requirements for the impact of Taiwan Issued on. 2011-12-30 2012-08-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This section drafted in accordance with GB/T 1.1-2009 given rules. This standard is managed by the National Standardization Technical Committee chemicals dangerous (SAC/TC251) and focal points. This standard was drafted. Shandong Entry Inspection and Quarantine Bureau, China Petroleum and Chemical Industry Association, Jiangsu Entry-Exit Inspection and Quarantine Bureau. The main drafters of this standard. Wan Min, Wang Xiaobing, pottery strong car ceremony east, Barbara Feng, Xu Yan. Dangerous goods packaging drop test requirements for the impact of Taiwan

1 Scope

This standard provides for the transport of dangerous goods packaging drop test performance requirements impact station. This standard applies to the transport of dangerous goods drop test package used shock machine.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 4857.5 packaging transport package drop test methods

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Shock machine theimpactsurface When the drop test, dangerous goods transport package impact internet. 3.2 Levelness levelness The actual impact angle with the horizontal plane of the table, can also be used elevation difference per unit length (mm/m) represents. 3.3 Flatness flatness The difference between the data plane and not between the absolute level. 3.4 Impact mesa calibration area demarcatedareaofimpactsurface Impact countertops (including steel and reinforced concrete around) the overall design of the area. 3.5 Calibration quality demarcatedmassofimpactsurface impact station Impact the overall quality of Taiwan, including the steel and reinforced concrete layer.

4 Requirements

4.1 General Requirements Impact mesa shall be horizontal, flat, smooth, hard, inelastic, and in line with GB/T 4857.5 the relevant requirements. 4.2 Impact mesa requirements 4.2.1 Flatness Impact mesa horizontal plane, level height difference between any two points is generally not more than 2mm. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 27863-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 27863-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 27863-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 27863-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.