GB/T 26968-2023 English PDF

US$459.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26968-2023: Feed machinery - Nominating method for product model
Status: Valid

GB/T 26968: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 26968-2023	459	Add to Cart	4 days	Feed machinery - Nominating method for product model	Valid
GB/T 26968-2011	559	Add to Cart	3 days	Feed machinery -- Editorial nominating method for model designation	Obsolete

Similar standards

GB/T 24674   LY/T 3022   GB/T 25409   GB/T 21307   GB/T 29374   

Basic data

Standard ID: GB/T 26968-2023 (GB/T26968-2023)
Description (Translated English): Feed machinery - Nominating method for product model
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: B93
Classification of International Standard: 65.060
Word Count Estimation: 22,258
Date of Issue: 2023-05-23
Date of Implementation: 2023-12-01
Older Standard (superseded by this standard): GB/T 26968-2011
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 26968-2023: Feed machinery - Nominating method for product model

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 65:060 CCSB93 National Standards of People's Republic of China Replacing GB/T 26968-2011 Model preparation method of feed machinery products Released on 2023-05-23 2023-12-01 implementation State Administration for Market Regulation Released by the National Standardization Management Committee

table of contents

Preface I 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Preparation method 1 4:1 Model Composition 1 4:2 Preparation scheme 2 Appendix A (informative) Some commonly used feed machinery product models compilation scheme 9

foreword

This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting: This document replaces GB/T 26968-2011 "Methods for Compilation of Models of Feed Machinery Products": Compared with GB/T 26968-2011, except Apart from structural adjustments and editorial changes, the main technical changes are as follows: a) The category of "ultrafine pulverization equipment" is added, code-named "WF" (see Table 1); b) Change the type name of "cleaning equipment" to "screening equipment", and change the category code from "QL" to "SL" (see Table 1,:2011 edition table1); c) Deleted the type of "quantitative packaging equipment" (see Table 1 of the:2011 edition); d) The model codes of 39 products have been changed, the model codes of 74 products have been added, and the model codes of 29 products have been deleted (see Table 2, Table 2 of the:2011 edition); e) Added specification requirements for some products (see Table 3): Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by China Machinery Industry Federation: This document is under the jurisdiction of the National Feed Machinery Standardization Technical Committee (SAC/TC384): This document was drafted by: Guoliang Wuhan Scientific Research and Design Institute Co:, Ltd:, Jiangsu Fengshang Intelligent Technology Co:, Ltd:, Chia Tai Investment Co:, Ltd: Co:, Ltd:, Buhler (Changzhou) Machinery Co:, Ltd: The main drafters of this document: Xie Jian, Yang Xihua, Chen Hui, Wang Mei, Jiang Mingming, Shao Laimin, Jiang Zuokui, Shi Yuping, Zhao Yin: This document was first published in:2011, and this is the first revision: Model preparation method of feed machinery products

1 Scope

This document describes the preparation method of feed machinery product model: This document is applicable to the model compilation of feed machinery products:

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document: GB/T 10647 Feed Industry Terminology GB/T 18695 Feed Processing Equipment Terminology

3 Terms and Definitions

The terms and definitions defined in GB/T 10647 and GB/T 18695 apply to this document:

4 Preparation method

4:1 Model Composition 4:1:1 The product model is composed of category code, type code, main specifications and improved design serial number, expressed as follows: □□ Category code □□ Type code □×□-□ main specifications Improved design serial number Note: The main specifications of individual equipment can be expressed as □/□-□: 4:1:2 Category code: It is represented by two uppercase "Chinese Pinyin letters" (hereinafter referred to as "letters"), and the product name is selected to represent the product category The first letters of the two Chinese characters of other keywords: 4:1:3 Type code: It is represented by one or two uppercase letters, generally one or two characters representing the structural type or operating mode are selected: The initials of two Chinese characters, and the initials of English words in special cases: 4:1:4 Main specifications: represented by Arabic numerals (hereinafter referred to as "numbers"), generally choose the size and number of main parts of the product or the main Numerical representations such as structural parameters or main performance parameters are required: If there are two or more main specifications, they can be written consecutively, with "×" or "-" symbol Separation; use "×" between values with the same measurement unit, and "-" between values with different measurement units: Specification values are generally expressed in integers (required If decimals are used, take one decimal), without marking the unit of measurement; the number of main components is indicated by "-" followed by numbers, and only one piece is not marked number of pieces: 4:1:5 Improved design serial number: represented by a capital letter: ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 26968-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 26968-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 26968-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 26968-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 26968-2023?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 26968-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.