GB/T 2679.2-2015 English PDFUS$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 2679.2-2015: Sheet materials -- Determination of water vapour transmission rate -- Gravimetric (Dish) method Status: Valid GB/T 2679.2: Historical versions
Basic dataStandard ID: GB/T 2679.2-2015 (GB/T2679.2-2015)Description (Translated English): Sheet materials -- Determination of water vapour transmission rate -- Gravimetric (Dish) method Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y30 Classification of International Standard: 85.010 Word Count Estimation: 10,186 Date of Issue: 2015-09-11 Date of Implementation: 2016-04-01 Older Standard (superseded by this standard): GB/T 2679.2-1995 Quoted Standard: GB/T 450; GB/T 10739 Adopted Standard: ISO 2528-1995, MOD Regulation (derived from): National Standard Announcement 2015 No.25 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies the sheet materials and methods for weight moisture permeability (moisture-cup) Determination of moisture permeability of the crease. This Standard applies to the flat, can hinder the tissue water vapor permeable packaging materials such as paper, cardboard, plastic film, paper and film or metal foil in line with materials, rubber or plastic coated fabrics. This method is not applicable under the test conditions and damage due to contact with hot wax or significant shrink film. For moisture permeability of less than 1g/(m2 �� 24h) or greater than the material thickness of 3mm, so that this method is not recommended. GB/T 2679.2-2015: Sheet materials -- Determination of water vapour transmission rate -- Gravimetric (Dish) method---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Sheet materials. Determination of water vapour trasmission rate. Gravimetric (Dish) method ICS 85.010 Y30 National Standards of People's Republic of China Replacing GB/T 2679.2-1995 Determination of moisture permeability of sheet materials Weight (permeable cup) Method Gravimetric (Dish) method (ISO 2528.1995, MOD) Issued on. 2015-09-11 2016-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 2679.2-1995 "Paper and cardboard crease moisture permeability and moisture permeability measurement (disc method)", and GB/T 2679.2- The main technical changes compared to 1995 are as follows. --- Modify the standard name; --- Expanding the scope of the standard; --- Permeable cup inner diameter increases the accuracy requirements; --- Increasing the temperature and humidity constant temperature and humidity test equipment and conditions; --- Modified by the temperature (38 ± 0.5) ℃ to (38 ± 1) ℃; --- Increased use of blank samples; --- Modify the sample wax seal requirements; --- Modify the number of tests; --- Increasing the method of drawing moisture permeability calculated. This revised standard adopts ISO 2528.1995 "sheet materials moisture permeability measured by weight (moisture-cup) Act." This standard and ISO 2528.1995 compared to the main technical differences are as follows. --- On normative references, this standard has been adjusted technical differences, in order to adapt our technical conditions, the adjusted situation Focus is reflected in the status of Chapter 2, "Normative references", the specific adjustments are as follows. ● Modify with international standards of GB/T 450 instead of ISO 186; ● use equivalent to international standards of GB/T 10739 instead of ISO 187; --- Permeable cup different dimensions; --- Crease fold through different sample preparation methods and humidity; --- Modify the formula crease moisture permeability; --- Remove the ISO 2528.1995 in the informative Appendix C. This standard and ISO 2528.1995, compared with more adjustments are given in Appendix A of this standard and ISO 2528 in the structure. Chapter 1995 Article ID Control List. Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. The standard proposed by China National Light Industry Council. The standard paper by the National Standardization Technical Committee (SAC/TC141) centralized. This standard was drafted. Zhejiang Kane specialty materials Co., Ltd., China Pulp and Paper Research Institute, the national paper quality supervision and inspection Test center. The main drafters of this standard. Zhangqing Wen, Chen Wanping, Yin Qiao, Li Dafang, Li Lu. This standard replaces the standards previously issued as follows. --- GB/T 2679.2-1981; GB/T 2679.2-1995. Determination of moisture permeability of sheet materials Weight (permeable cup) Method1 ScopeThis standard specifies the moisture permeability of sheet materials and methods weight (permeable cup) Determination of moisture permeability of the crease. This standard applies to flat, thin pages can hinder the water vapor permeability of packaging materials, such as paper, cardboard, plastic film, paper and film or metal Foil composite materials, rubber or plastic coated fabrics. This method is not applicable under the test conditions due to contact with hot wax and damage or bright Significantly shrink film. Moisture permeability of less than 1g/(m2 · 24h) or greater than the material thickness of 3mm, so that this method is not recommended.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 450 and take samples to an aspect of paper and paperboard samples, positive and negative determination (GB/T 450-2008, ISO 186. 2002, MOD) GB/T 10739 paper, paperboard and pulp sample processing and testing standard atmospheric conditions (GB/T 10739-2002, eqv ISO 187. 1990)3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Moisture permeability watervapourtransmissionrate Under specified temperature and humidity conditions, the quality of water vapor per unit time through unit area of \u200b\u200bspecimen. In grams per square meter per 24 hours expressed [G/(m2 · 24h)]. Note. The material moisture permeability depending on the thickness, composition and permeability, as well as temperature and relative humidity testing. 3.2 Crease moisture permeability watervapourtransmissionrateofcreasedmaterials Moisture permeability under the same test conditions, the crease of the sample moisture permeability difference and moisture permeability of the sample did not fold to 24h through the 100m long Sample mass of water vapor crease representation [g/(24h · 100m)]. Principle 4 Interior desiccant material to be measured by the sealing permeable cup is placed in conditions controlled temperature and humidity in the atmosphere, at the appropriate time interval weighing through Quality wet cup. When the increase in quality and the time interval is proportional to the moisture permeability can be calculated.5 test equipment and materials5.1 permeable cup 5.1.1 made of aluminum or stainless steel, its diameter should be suitable for weighing in the balance. Light tough quality requirements, under the experimental conditions with ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 2679.2-2015_English be delivered?Answer: Upon your order, we will start to translate GB/T 2679.2-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 2679.2-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2679.2-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 2679.2-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2679.2-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
