GB/T 26729-2011 English PDF

US$214.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26729-2011: Agricultural irrigation equipment -- PVC above-ground low-pressure pipe for surface irrigation -- Specifications and test methods
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 26729-2011	214	Add to Cart	3 days	Agricultural irrigation equipment -- PVC above-ground low-pressure pipe for surface irrigation -- Specifications and test methods	Valid

Similar standards

GB/T 24674   GB/T 33006   GB/T 25409   GB/T 32250.5   GB/T 20183.4   GB/T 45789   

Basic data

Standard ID: GB/T 26729-2011 (GB/T26729-2011)
Description (Translated English): Agricultural irrigation equipment -- PVC above-ground low-pressure pipe for surface irrigation -- Specifications and test methods
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: B91
Classification of International Standard: 65.060.35
Word Count Estimation: 11,142
Date of Issue: 2011-07-20
Date of Implementation: 2012-01-01
Quoted Standard: ISO 1167-1; ISO 1167-2; ISO 2505; ISO 2507-1; ISO 2507-2; ISO 9852
Adopted Standard: ISO 16149-2006, IDT
Regulation (derived from): Announcement of Newly Approved National Standards No. 10 of 2011
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard provides for irrigation through the valve pressure irrigation water supply and distribution unplasticized polyvinyl chloride (PVC) pipe technical requirements. This standard applies to the range of 50mm ~ 315mm diameter low-voltage outdoor use PVC pipe.

GB/T 26729-2011: Agricultural irrigation equipment -- PVC above-ground low-pressure pipe for surface irrigation -- Specifications and test methods

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Agricultural irrigation equipment. PVC above-ground low-pressure pipe for surface irrigation. Specifications and test methods ICS 65.060.35 B91 National Standards of People's Republic of China Agricultural irrigation equipment Surface irrigation polyvinyl chloride (PVC) low-pressure pipe Technical specifications and test methods (ISO 16149.2006, IDT) Issued on. 2011-07-20 2012-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard uses the translation method identical with ISO 16149.2006 "Agricultural Irrigation Irrigation equipment surface of polyvinyl chloride (PVC) low-pressure pipe Specifications and test methods "technology. Correspondence between the consistency of the standards of international documents and normative references of the following documents. --- GB/T 6111 Standard Test Method for conveying fluid pressure within the thermoplastic pipe (GB/T 6111-2003, ISO 1167. 1996, IDT) --- GB/T 6671 Determination of thermoplastic pipe longitudinal retraction rate (GB/T 6671-2001, eqv ISO 2505.1994) --- GB/T 8802 Thermoplastics pipes, fittings Vicat softening temperature measured (GB/T 8802-2001, eqv ISO 2507.1995) The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee (SAC/TC201) Agricultural machinery centralized. This standard was drafted. Chinese Academy of Agricultural Mechanization Sciences, Jiangsu University Fluid Machinery Engineering Technology Research Center. Drafters of this standard. Emperor before entering, Wang Yang, Zhang Jinfeng, Zhang Meng, Zhao Liwei, Wang Xinkun, Lang Tao. Agricultural irrigation equipment Surface irrigation polyvinyl chloride (PVC) low-pressure pipe Technical specifications and test methods

1 Scope

This standard specifies the irrigation pipe through the valve low pressure irrigation water supply and distribution of unplasticized polyvinyl chloride (PVC) technique for Claim. This standard applies to pipe diameters ranging from 50mm ~ 315mm low-voltage outdoor use PVC pipe.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. ISO 1167-1 Thermoplastics fluid transport pipes, fittings and assemblies - Determination of resistance to internal pressure - Part 1. General method (Thermo- plasticspipes, fittingsandassembliesfortheconveyanceoffluids-Determinationoftheresistanceto internalpressure-Part 1. Generalmethod) ISO 1167-2 Thermoplastics fluid transport pipe, fittings and components measured resistance to internal pressure - Part 2. Pipes specimen preparation (Ther- moplasticspipes, fittingsandassembliesfortheconveyanceoffluids-Determinationoftheresistance tointernalpressure-Part 2. Preparationofpipetestpieces) ISO 2505 (all parts) Thermoplastics pipes - Determination of longitudinal reversion (Thermoplasticspipes- Longitudinalreversion) General test methods (Thermo-. measuring temperature - Part 1 ISO 2507-1 Thermoplastics pipes and fittings - Vicat softening plasticspipesandfittings-Vicatsofteningtemperature-Part 1. Generaltestmethod) ISO 2507-2 Thermoplastics pipes and fittings - Determination of Vicat softening temperature - Part 2. hard PVC (PVC-U) or Chlorinated polyvinyl chloride (PVC-C) pipes and fittings and high-impact polyvinyl chloride (PVC-HI) pipes test conditions [Thermoplastics pipesandfittings-Vicatsofteningtemperature-Part 2. Testconditionsforunplasticizedpoly (vinyl chloride) (PVC-U) orchlorinatedpoly (vinylchloride) (PVC-C) pipesandfittingsandforhighimpact resistancepoly (vinylchloride) (PVC-HI) pipes] ISO 9852 unplasticized PVC pipe (PVC-U) at a predetermined temperature resistant dichloromethane (DCMT) Test Method [Unplasticized poly (vinylchloride) (PVC-U) pipes-Dichloromethane resistance at specified temperature (DCMT) -Testmethod]

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Bell sleeve bel The bell end of the tube, when the end of the tube adjacent to the tube inserted into the bell-shaped sleeve, bell sleeve sealing function. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 26729-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 26729-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 26729-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 26729-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.