GB/T 26707-2011 English PDF

US$114.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26707-2011: Wrist and pocket watches -- Fitting diameters for hour, minute and second hands
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 26707-2011	114	Add to Cart	3 days	Wrist and pocket watches -- Fitting diameters for hour, minute and second hands	Valid

Similar standards

GB/T 38023   GB/T 30106   QB/T 4055.2   GB/T 30416   GB 44702   GB/T 26716   

Basic data

Standard ID: GB/T 26707-2011 (GB/T26707-2011)
Description (Translated English): Wrist and pocket watches -- Fitting diameters for hour, minute and second hands
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Y11
Classification of International Standard: 39.040.10
Word Count Estimation: 6,688
Date of Issue: 2011-06-16
Date of Implementation: 2011-12-01
Adopted Standard: ISO 9701-1994, IDT
Regulation (derived from): Announcement of Newly Approved National Standards No. 9 of 2011
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the watches and watch the hour, minute and second hands with the diameter of the axle with the movement.

GB/T 26707-2011: Wrist and pocket watches -- Fitting diameters for hour, minute and second hands

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Wrist and pocket watches. Fitting diameters for hour, minute and second hands ICS 39.040.10 Y11 National Standards of People's Republic of China Watches and pocket watches Diameter with hour, minute and second hands Fittingdiametersforhour, minuteandsecondhands (ISO 9701.1994, IDT) Issued on. 2011-06-16 2011-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

Accordance with the standards GB/T 1.1-2009. Drafting Rules "Standardization Guide Part 1 standard structure and preparation of" given. This standard uses the translation method identical with ISO 9701.1994 "pocket watches and hour, minute and second hands with diameter." This standard made the following editorial changes. --- To clarify the definition, the definition of 2.1 and 2.2 do a supplementary text; --- In Chapter 4, the body of the text drawn diagrams and Supplementary Table. The standard proposed by China National Light Industry Council. This standard by the National Standardization Technical Committee clocks (SAC/TC160) centralized. This standard was drafted. Watch Institute of Light Industry, Zhuhai Rossini Watch Industry Co., Ltd. Shenzhen FIYTA Technology Development Co., EBOHR (Shenzhen) Co., Ltd., Fujian on the Run Precision Instrument Co., Ltd. The main drafters of this standard. Kim Young-sook, Wang Yongning, Tang Hai Yuan, Yang Li, Su Fang, Guo Xingang Liu excellence. Watches and pocket watches Diameter with hour, minute and second hands

1 Scope

This standard specifies the diameter of the watch and pocket watch with hour, minute and second hands with the movement of the hub.

2 Terms and definitions

The following terms and definitions apply to this document. 2.1 When the wheel with a diameter fittingdiametersofhourwheel, minutes, and seconds wheel axle, cannonpinionandsecondwheel And when the wheel with the hands, minutes and seconds wheel hub outer diameter. 2.2 With diameter fittingdiametersofhour hour, minute and second hands, minuteandsecondhands And axle movement with hour, minute and second hands inside diameter.

3 with the diameter

When the axle hour and minute hand and sub-axles, axle with second hand and second, respectively, in Figure 1 to Figure 3, with the diameter shown in Table 1. Figure 1 axle (φd1) and hour (φD1) fitting diameter Figure 2 points axle (φd2) and minute (φD2) fitting diameter ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 26707-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 26707-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 26707-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 26707-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.