GB/T 26671-2011 English PDF

US$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26671-2011: Guide for environmentally conscious design assessment of electrical and electronic products
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 26671-2011	329	Add to Cart	3 days	Guide for environmentally conscious design assessment of electrical and electronic products	Valid

Similar standards

GB/T 30137   GB/T 20877   GB/T 32882   GB/T 26669   GB/T 26668   GB/T 26667   

Basic data

Standard ID: GB/T 26671-2011 (GB/T26671-2011)
Description (Translated English): Guide for environmentally conscious design assessment of electrical and electronic products
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K04
Classification of International Standard: 29.020
Word Count Estimation: 14,141
Date of Issue: 2011-06-16
Date of Implementation: 2011-12-01
Quoted Standard: GB/T 23686
Regulation (derived from): Announcement of Newly Approved National Standards No. 9 of 2011
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the electrical and electronic products for environmentally conscious design principles and methods of evaluation. This standard applies to the relevant guidance Standardization Technical Committee to develop specific products for environmentally conscious design evaluation criteria. This standard can also guide the organization for electrical and electronic products environmental conscious design to make self-evaluation.

GB/T 26671-2011: Guide for environmentally conscious design assessment of electrical and electronic products

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Guide for environmentally conscious design assessment of electrical and electronic products ICS 29.020 K04 National Standards of People's Republic of China Electric and electronic products for environmentally conscious design Assessment Guidelines Issued on. 2011-06-16 2011-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Environmentally Conscious Design Evaluation of General Principle 2 5 Environmentally Conscious Design Assessment process 2 5.1 Overview 2 5.2 scoping 3 5 5.3 Evaluation methods and criteria Example 6 5.4 Evaluation 5.5 Analysis Evaluation and Improvement 6 6 Environmentally conscious design evaluation results declared 7 Appendix A (informative) environmentally conscious product design evaluation statement Example 8 Reference 9

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard by the National Standardization Technical Committee on Environment electrical and electronic products and systems and centralized (SAC/TC297). This standard was drafted. Machinery Industry Beijing Electrotechnical Institute of Economic Research, Changshu Switchgear Manufacturing Co., Ltd., Shenzhen Institute of Standards and Technology Hospital study, Lenovo (Beijing) Co., Ltd., China Electrical Equipment Industry Association, the China Quality Certification Center, China Electric Apparatus Research Institute, Shanghai Electric Branch Institute (Group) Co., Ltd., Shanghai Electric Tool Research Institute, Shanghai Electric Cable Research Institute, Beijing breakthrough Electric Co., Ltd., TBEA Shenyang Shenyang Transformer Group Co., Ltd., Beijing ABB Low Voltage Electric Co., Ltd., Schneider Electric (China) Investment Co., Ltd. The main drafters. Zhang Liang, Guo Liping, Huang Man snow, Liu Yanbin, Wang Chunhua, Fang Xiaoyan, Zhou Jianxing, Tao Hongzhi, Yang Chunrong, Liugong Gui, Ji Hui Yu, Zhu Songtao, Wang Zhongdan, Chenjian Qiu, Sun Jiansheng, Han Hongjun, He Qian, Du Jialin, Mok Hing-wave.

Introduction

Environmentally conscious design reviews to verify and improve product design effect for the purpose of environmental awareness, often including scoping, select Evaluation And to determine the method of evaluation criteria, implementation of evaluations, the results statement. Environmentally Conscious Design Assessment may be a particular object is usually electric and electronic products or product categories, or environmentally conscious design. Through environmentally conscious design assessment to measure a specific product or the same product type whether environmentally conscious design requirements. Product Environmental Conscious design usually refers to the choice of manufacturing technology and the development or improvement of products, ruled in favor of environmental protection and ecological balance of technology option Optional; product design takes into account the end of the product life cycle, removable, biodegradable, parts can be refurbished or repeated use; products The process should not result in a waste of resources and environmental deterioration; product packaging should follow internationally accepted 3R principles, namely reduction (reduce), and then make Use (reuse), reusable (recycle); consumer products and services should be instructed in the use of the environment is not destruction. Electric and electronic products for environmentally conscious design Assessment Guidelines

1 Scope

This standard specifies the principles and methods of electric and electronic products for environmentally conscious design evaluation. This standard applies to the relevant guidance for Standardization Technical Committee evaluation criteria for environmentally conscious design specific products. This standard may also guide the organization for electrical and electronic products for environmentally conscious design to make self-evaluation.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. Environmentally conscious design guide GB/T 23686 of the electrical and electronic products (GB/T 23686-2009, IEC 62430CDV.2007, IDT)

3 Terms and Definitions

GB/T 20877, GB/T 23686, GB/T 24001, GB/T 24040 and defined by the following terms and definitions apply to this document. 3.1 Environmental factors environmentalaspect Interacting elements organized activities or products that can occur with the environment. Note 1. The significant environmental aspect is an environmental aspect that has or can have significant environmental impacts. Note 2. rewrite GB/T 24001-2004, definitions 3.6. 3.2 Environmental Impact environmentalimpact All or part of the organization due to environmental factors to the environment caused by any harmful or beneficial changes. [GB/T 24001] 3.3 Environmentally conscious design environmentalyconsciousdesign; ECD Consider a systematic approach to environmental factors in the design and development process, aimed at reducing the negative environmental impacts of products. Note 1. The design and the environment, ecological environment design, environmentally sustainable design, eco design, green design, and other terms are synonymous. Note 2. rewrite GB/T 23688-2009, definitions 3.6. 3.4 Environmentally Conscious Design Assessment ECD assessment; ECDA According environmentally conscious product design requirements and objectives, qualitative or quantitative assessment of environmentally conscious design of products carried. 3.5 Life cycle thinking lifecyclethinking; LCT Throughout the product life cycle, taking into account all relevant environmental factors. [GB/T 20877-2007, the definition 3.10] ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 26671-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 26671-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 26671-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 26671-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.