GB/T 26669-2024 English PDFUS$599.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 26669-2024: Environmentally conscious design for electrical and electronic products - Terminology Status: Valid GB/T 26669: Historical versions
Basic dataStandard ID: GB/T 26669-2024 (GB/T26669-2024)Description (Translated English): Environmentally conscious design for electrical and electronic products - Terminology Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K04 Classification of International Standard: 29.020 Word Count Estimation: 30,317 Date of Issue: 2024-05-28 Date of Implementation: 2024-12-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 26669-2024: Environmentally conscious design for electrical and electronic products - Terminology---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 29:020 CCSK04 National Standards of People's Republic of China Replaces GB/T 26669-2011 Terminology for Environmental Awareness Design of Electrical and Electronic Products Terminology Released on 2024-05-28 2024-12-01 implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 Appendix A (Informative) Schematic diagram of main terms for end-of-life treatment of electrical and electronic products 14 Reference 15 Index 17ForewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting: This document replaces GB/T 26669-2011 "Terms for Environmental Awareness Design of Electrical and Electronic Products" and is consistent with GB/T 26669-2011: In addition to structural adjustments and editorial changes, the main technical changes are as follows: a) The scope of application of this document has been modified (see Chapter 1, Chapter 1 of the:2011 edition); b) Added the following terms and definitions: 1) Some basic terms of environmental awareness design (see 3:1:1); 2) Some terms of environmental awareness design methods (see 3:2:1:1, 3:2:1:3~3:2:1:6, 3:2:2:1, 3:2:2:2, 3:2:2:4); 3) Some environmental awareness design evaluation terms (see 3:3:2, 3:3:3:3, 3:3:3:6, 3:3:3:7, 3:3:4:1, 3:3:4:2, 3:3:5:2, 3:3:5:3, 3:3:6:6~3:3:6:9, 3:3:6:13~3:3:6:15, 3:3:7:3~3:3:7:11, 3:3:7:14); 4) Some life cycle assessment terms (see 3:4:1:4, 3:4:2:2~3:4:2:6, 3:4:2:9~3:4:2:12, 3:4:3:1, 3:4:3:2, 3:4:3:4, 3:4:3:6~3:4:3:8); 5) Some environmental awareness design information terms (see 3:5:1, 3:5:4); c) Deleted some terms and definitions (see 3:1:1, 3:1:10~3:1:12, 3:2:9, 3:2:10, 3:2:12, 3:2:14~ 3:2:16, 3:2:17:2, 3:2:17:6, 3:2:18:2, 3:2:19:4, 3:2:20:8, 3:2:20:11, 3:3:4~3:3:6, 3:4:1); d) The following terms and definitions have been modified: 1) Some basic terms for environmental awareness design (see 3:1:2~3:1:6, 3:1:2~3:1:5 and 3:2:3 of the:2011 edition); 2) Some environmental awareness design method terms (see 3:2:1:2, 3:2:1:7, 3:2:1:8, 3:2:2:3, 3:1:9, 3:3:1, 3:3:2 of the:2011 edition) 3:1:16, 3:1:15); 3) Some environmental awareness design evaluation terms (see 3:3:1, 3:3:3:2, 3:3:3:4, 3:3:3:5, 3:3:6:1~3:3:6:5, 3:3:6:10, 3:3:6:11, 3:3:6:16~3:3:6:18, 3:3:7:1, 3:3:7:2, 3:3:7:12, 3:3:7:13, 3:3:7:15, 3:3:7:17, 3:3:7:18, 3:2:1, 3:2:17:3~3:2:17:5, 3:2:19:1~3:2:19:3, 3:2:19:5~3:2:19:16 of the:2011 edition, 3:2:20:9, 3:2:4, 3:2:6~3:2:8, 3:2:20:1, 3:2:20:11, 3:2:20:10, 3:2:20:2, 3:2:20:3, 3:2:20:4, 3:2:20:5, 3:2:20:7); 4) Some life cycle assessment terms (see 3:4:1:1~3:4:1:3, 3:4:2:7, 3:4:2:8, 3:4:3:3, 3:4:3:5,:2011 edition 3:1:6~3:1:8, 3:1:13, 3:1:14, 3:2:11, 3:2:13); 5) Some environmental awareness design information terms (see 3:5:2, 3:4:2 of the:2011 edition): Please note that some of the contents of this document may involve patents: The issuing organization of this document does not assume the responsibility for identifying patents: This document was proposed and coordinated by the National Technical Committee for Standardization of Electrical and Electronic Products and Systems Environment (SAC/TC297): This document was drafted by: Beijing Electrical Technology and Economic Research Institute of Machinery Industry, Shanghai Electric Science Research Institute (Group) Co:, Ltd:, Shenzhen Municipal Standards and Technology Research Institute, China Electrical Equipment Industry Association, Huaxin (Jiaxing) Intelligent Equipment Co:, Ltd:, China Quality Certification Center, Zhongshan Shenzhong Standard Quality Research Center, China Electronics Technology Standardization Institute, China Academy of Information and Communications Technology, Super Fusion Digital Technology Co:, Ltd:, Huawei Technology Co:, Ltd:, Schneider Electric (China) Co:, Ltd:, SGS-CSTC Standards Technical Services (Tianjin) Co:, Ltd:, Rockwell Automation (China) Co:, Ltd:, Zhejiang Gengu Cable Co:, Ltd: The main drafters of this document are: Teng Yun, Wang Aiguo, Xu Lijie, Zhang Liang, Gong Yu, Chen Zeliang, Chen Zhanzhan, Yang Yutao, Lu Chunyang, Huang Xuan, Fu Maijin, Liu Guoguo, Hu Ying, Song Weihong, Huang Xiangyan, Zhou Yue: This document was first published in:2011 and this is the first revision: Terminology for Environmental Awareness Design of Electrical and Electronic Products1 ScopeThis document defines terms and definitions related to environmentally aware design of electrical and electronic products: This document is applicable to the drafting of environmental awareness design standards for electrical and electronic products and the preparation of technical documents: The terms in this document are divided into environmental awareness design basic terms, environmental awareness design method terms, environmental awareness design evaluation terms, life Classification of life cycle assessment terminology and environmentally aware design information terminology: Appendix A provides a schematic diagram of the main terms for end-of-life treatment of electrical and electronic products:2 Normative referencesThis document has no normative references:3 Terms and definitions3:1 Basics of Environmentally Aware Design 3:1:1 Product Any goods or services: Note: Products include interrelated goods or services: [Source: ISO 14050:2020, 3:5:12, modified] 3:1:2 A systematic approach to considering environmental factors during the design and development process, aiming to reduce negative environmental impacts throughout the product life cycle: NOTE: Other terms with the same meaning used around the world include ecodesign, design for the environment (DFE), green design and environmentally sustainable design: [Source: GB/T 23686-2022, 3:1:1] 3:1:3 Environment External entities that can be affected by the existence of products include air, water, land, natural resources, plants, animals, people, and the relationships between them: mutual relationship: NOTE External presence may be described in terms of biodiversity, ecosystems, climate or other characteristics: [Source: GB/T 23686-2022, 3:4:1] 3:1:4 Environmental factors Elements of an organization's activities or products that interact or can interact with their environment: Note 1: An environmental factor may produce one or more environmental impacts: A significant environmental factor is one that has or can produce one or more significant environmental impacts: environmental factors: Note 2 to entry: Significant environmental aspects are determined by the organization using one or more criteria: Note 3 to entry: The activities of the organization are those related to design and development: ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 26669-2024_English be delivered?Answer: Upon your order, we will start to translate GB/T 26669-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 26669-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 26669-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 26669-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 26669-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
