GB/T 26620-2011 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26620-2011: Marbled flounder
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 26620-2011	229	Add to Cart	3 days	Marbled flounder	Valid

Similar standards

SC/T 4030   GB 5009.261   GB/T 20554   GB/T 26621   GB/T 26619   

Basic data

Standard ID: GB/T 26620-2011 (GB/T26620-2011)
Description (Translated English): Marbled flounder
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: B51
Classification of International Standard: 65.150
Word Count Estimation: 10,130
Date of Issue: 2011-06-16
Date of Implementation: 2011-11-01
Quoted Standard: GB/T 18654.2; GB/T 18654.3; GB/T 18654.12
Regulation (derived from): Announcement of Newly Approved National Standards No. 9 of 2011
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the blunt snout Huanggai butterfly (Pseudo pleuronectes yokohamae) the main form of structural characteristics, growth and reproduction, cytogenetic features, biochemical genetics characteristics and detection methods. This standard applies to blunt snout butterfly Huang Gai detection and identification of germplasm.

GB/T 26620-2011: Marbled flounder

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Marbled flounder ICS 65.150 B51 National Standards of People's Republic of China Kiss blunt yellowtail flounder Issued on. 2011-06-16 2011-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

Appendix A of this standard is a normative appendix, Appendix B is an informative annex. The standard proposed by the People's Republic of China Ministry of Agriculture. This standard by the National Standardization Technical Committee on Fisheries mariculture sub-technical committee. This standard was drafted. Chinese Academy of Fishery Sciences Yellow Sea Fisheries Research Institute, Ocean University of China. The main drafters. Zhang Yan, Chen Si-qing, Liu Man red sand Zhenxia at East Cheung. Kiss blunt yellowtail flounder

1 Scope

This standard gives a kiss blunt yellowtail flounder (Pseudopleuronectesyokohamae) main morphological structural features ﹑ ﹑ growth and reproduction Cell genetic characteristics, biochemical and genetic characteristics detection methods. This standard applies to blunt kiss Accession detection and identification of yellowtail flounder.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 18654.2 Inspection of germplasm for cultured fishes - Part 2. Sampling Method GB/T 18654.3 Inspection of germplasm for cultured fishes - Part 3. Determination of Characters GB/T 18654.12 Inspection of germplasm for cultured fishes - Part 12. karyotyping

3 Names and classification

3.1 Name Kiss blunt yellowtail flounder Pseudopleuronectesyokohamae (Günther) 3.2 taxonomic status Belonging Pleuronectiformes (Pleuronectiformes), flatfish suborder (Pleuronectoidei), flounder Branch (Pleuronectidae), flounder subfamily (Pleuronectinae), yellowtail flounder genus (Pseudopleuronectes).

4 main morphological characteristics

4.1 External morphology Kiss blunt yellowtail flounder takes the shape of oval, dorsal and ventral margin of the crown similar. Head quite small, in the back above the upper edge of a front of a intaglio. Eye small, both in Right. Eye interval was quite narrow ridge crest, and to be scaly. Dental quite small and flat side, top slightly truncate, was shaped front teeth, base thick, tightly packed. Long jaw, protruding from the front; the rear end terminates below the maxillary later at the leading edge of the eye. Eye nose close to the front side of the upper jaw; eyeless side of the front After the nose edge flap has a small flake, nose only after a large hole. On the edge of the gill cover substantially free. Scales quite small, usually as ctenoid eye side, no eye-side circular scales, and sometimes also the head of both weak ctenoid. Only kiss on the head and lower jaw without scales, interocular Compartment is full of small ctenoid. Each fin rays are how much of the scales. Left and right side of the line equally developed, the front above the pectoral fin has a lower curved arcuate Department, the Central to the curved portion 22 scales between dorsal fin base line to 26-line, the starting point to the straight portion between dorsal fin base scales 32 lines to 37 lines, the front lines On the temporal side branches very short. Eyed side brown or brown, sometimes with dark stripes of varying sizes scattered body, the dorsal and anal fins sometimes also Dusky, Edge after dark or black caudal fin. Yellowtail flounder blunt kiss external morphology is shown in Figure 1. 4.2 Number of Characters 4.2.1 dorsal fin. D.69 ~ 72 4.2.2 anal fin. A.50 ~ 53 4.2.3 pelvic fin. V.6 4.2.4 pectoral fin. P.11 4.2.5 siding Linlin formula. 75 to 83 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 26620-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 26620-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 26620-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 26620-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.