GB/T 26466-2011 English PDF

US$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26466-2011: Stationary flat steel ribbon wound vessels for storage of high pressure hydrogen
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 26466-2011	329	Add to Cart	3 days	Stationary flat steel ribbon wound vessels for storage of high pressure hydrogen	Valid

Similar standards

GB/T 24162   GB/T 24160   GB/T 24159   GB/T 45439   GB/T 26468   GB/T 26467   

Basic data

Standard ID: GB/T 26466-2011 (GB/T26466-2011)
Description (Translated English): Stationary flat steel ribbon wound vessels for storage of high pressure hydrogen
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J74
Classification of International Standard: 23.020.30
Word Count Estimation: 14,160
Date of Issue: 2011-05-12
Date of Implementation: 2011-12-01
Quoted Standard: GB/T 228-2002; GB/T 229-2007; GB 713-2008; GB 3531-2008; GB 6653-2008; JB 4708-2000; JB/T 4711-2003; JB 4726-2000; JB 4727-2000; JB 4728-2000; JB/T 4730.2-2005; JB/T 4730.3-2005; JB/T 4730.5-2005; JB 4732-1995; JB 4733-1996
Regulation (derived from): Announcement of Newly Approved National Standards No. 6 of 2011
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the stationary high-pressure hydrogen storage container with steel wound wrong design, manufacture, inspection and acceptance requirements. This standard applies to both of the following conditions are stationary high-pressure hydrogen storage container with steel wound wrong: a) design pressure is greater than or equal to 10MPa and less than 100MPa, b) the design temperature is greater than or equal to -40��C and less than or equal to 80��C, c) is greater than or equal to the inside diameter of 300mm and less than or equal to 1500mm, the design pressure (MPa) and the inner diameter (mm) of the product is not above 75, 000.

GB/T 26466-2011: Stationary flat steel ribbon wound vessels for storage of high pressure hydrogen

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Stationary flat steel ribbon wound vessels for storage of high pressure hydrogen ICS 23.020.30 J74 National Standards of People's Republic of China Stationary high-pressure hydrogen storage container with a strip-wound wrong Issued on. 2011-05-12 2011-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard by the National Standardization Technical Committee of the boiler pressure vessel (SAC/TC262) and focal points. This standard was drafted. Zhejiang University Institute of Chemical Machinery, Juhua Group Company Engineering Co., Ltd., China Electronics Engineering Design Institute, North Beijing speeding Green Power Technology Co., Ltd. The main drafters of this standard. Zheng Jin Yang, Wei Chunhua, Xu Ping, Yexiao Ru, Chen Lin new, Zhang Lifang, Liu Jianhu, Liuxian Xin, Zhu Guohui.

Introduction

Wrong strip-wound pressure vessel is in the form of a pressure-vessel structure pioneered. Since 1964 the successful development, China has manufacturing Strip wrong about Ammonia, methanol synthesis reactor, ammonia condensers, liquid copper absorber, hydraulic accumulator machine, high-pressure gas storage tanks more than 7,000. After 40 years of theoretical analysis and experimental research and engineering applications, China has established a system to optimize the design of fault-wound steel pressure vessel Theory, has accumulated a wealth of design, manufacturing experience. 1980 China promulgated the JB1149-80 "flat steel pressure vessels and technical conditions." In 1996 and 1997, respectively, the type of container Included in the American Society of Mechanical Engineers Boiler and Pressure Vessel Code Case 2229 and 2269, namely Case2229DesignofLayeredVessels UsingFlatRibbonWoundCylindricalShels, SectionⅧ, Division1 and Case2269DesignofLayered VesselsUsingFlatRibbonWoundCylindricalShels, SectionⅧ, Division2, it can be used in the manufacture of the design pressure Less than 70MPa, a diameter of 250mm ~ 3000mm, the design temperature does not exceed 427 ℃ pressure container. This standard is summed up in the wrong strip-wound pressure vessels (especially stationary high-pressure hydrogen storage container with a strip-wound wrong) design, manufacture, Experience, based on the latest research achievements at home and abroad to develop. Stationary high-pressure hydrogen storage container with a strip-wound wrong

1 Scope

This standard specifies the stationary high-pressure hydrogen storage container with a strip wrong about the design, manufacture, inspection and acceptance requirements. This standard applies to both of the following conditions are stationary high-pressure hydrogen storage container with a strip wound wrong. a) greater than the design pressure of less than or equal to 10MPa and 100MPa; b) greater than or equal to the design temperature -40 ℃ deg.] C and less than or equal to 80; c) 300mm inner diameter greater than or equal to and less than or equal to 1500mm, the design pressure (MPa) and the inner diameter (mm) of the product of Not more than 75,000.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 228-2002 metallic materials at room temperature tensile test method GB/T 229-2007 metallic materials - Charpy pendulum impact test method GB 713-2008 boiler and pressure vessel steel plate GB 3531-2008 cryogenic low-alloy steel plates for pressure vessels GB 6653-2008 with steel sheet and strip for welded gas cylinders JB4708-2000 steel pressure vessel welding procedure qualification JB/T 4711-2003 applying pressure vessels and transport packaging JB4726-2000 pressure vessel carbon steel and low alloy steel forgings JB4727-2000 temperature pressure vessels low alloy steel forgings JB4728-2000 pressure vessel steel forgings JB/T 4730.2-2005 pressure equipment Non-destructive testing - Part 2. ray detector JB/T 4730.3-2005 Nondestructive testing of pressure equipments - Part 3. Ultrasonic testing JB/T 4730.5-2005 Nondestructive Testing Pressure Equipment - Part 5. penetrant testing JB4732-1995 steel pressure vessel - Analysis and Design Standard (2005 edition confirmed) JB4733-1996 stainless steel pressure vessel explosion composite plate 3 Definitions, symbols 3.1 Definitions 3.1.1 Stationary high-pressure hydrogen storage container with a strip-wound wrong stationaryflatsteelribbonwoundvesselsforstorageofhigh pressurehydrogen Outside the thinner inner tube angle was wrong about the multilayer flat strip (number of layers is even), steel rings and cylinder to a certain angle, the strip adjacent layers Around the opposite, and only the ends of each strip with hemispherical head and the strengthening of high-pressure hydrogen storage vessel hoop are welded constituted (the type shown in Figure 1, 2, the external interface type for the container according to process requirements). ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 26466-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 26466-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 26466-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 26466-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.