GB/T 26460-2011 English PDF

US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26460-2011: Pulps -- Determination of zero-span tensile strength, wet or dry
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 26460-2011	259	Add to Cart	3 days	Pulps -- Determination of zero-span tensile strength, wet or dry	Valid

Similar standards

GB/T 24328.3   GB/T 27741   GB/T 31905   GB/T 45369   GB/T 26464   GB/T 26459   

Basic data

Standard ID: GB/T 26460-2011 (GB/T26460-2011)
Description (Translated English): Pulps -- Determination of zero-span tensile strength, wet or dry
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Y30
Classification of International Standard: 85.010
Word Count Estimation: 11,140
Date of Issue: 2011-05-12
Date of Implementation: 2011-09-15
Quoted Standard: GB/T 451.2; GB/T 462; GB/T 740; GB/T 10739; GB/T 24324; GB/T 24325; GB/T 24326; QB/T 1462; QB/T 1463
Adopted Standard: ISO 15361-2000, MOD
Regulation (derived from): Announcement of Newly Approved National Standards No. 6 of 2011
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the laboratory sheets given distance in the side when the initial zero Determination of tensile strength. This standard applies to all fibers, including recycled fiber.

GB/T 26460-2011: Pulps -- Determination of zero-span tensile strength, wet or dry

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Pulps. Determination of zero-span tensile strengh, wet or dry ICS 85-010 Y30 National Standards of People's Republic of China Pulp zero distance measuring tensile strength (Dry or wet) Pulps-Determinationofzero-spantensilestrength, wetordry (ISO 15361.2000, MOD) Issued on. 2011-05-12 2011-09-15 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This revised standard adopts ISO 15361.2000 "Determination of pulp zero span tensile strength (dry or wet)." This standard and ISO 15361. Compared to 2000, the main differences are as follows. --- The sample width unified 15mm; --- The ISO 15361.2000 Chapters 6 and 7 of this standard combined Chapter 6; --- The ISO 15361.2000 international standard referenced into with the corresponding national standards and industry standards (Chapter 2 of this standard). Appendix A of this standard is a normative appendix. The standard proposed by China National Light Industry Council. The standard paper by the National Standardization Technical Committee (SAC/TC141) centralized. This standard was drafted. China Pulp and Paper Research Institute, the national paper quality supervision and inspection center, China Paper Association Professional Committee of Standardization Members will. The main drafters. Zhang Qing. Pulp zero distance measuring tensile strength (Dry or wet)

1 Scope

This standard specifies the method for measuring the tensile strength was measured at a distance of zero initial laboratory sheets. This standard applies to all fibers, including recycled fiber.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 451.2 Paper and paperboard quantitative determination (GB/T 451.2-2002, ISO 536.1995, EQV) GB/T 462 paper, board and pulp - Determination of water sample (GB/T 462-2008, ISO 287. 1985, ISO 638. 1978, MOD) GB/T 740 pulp samples taken (GB/T 740-2003, ISO 7213. 1981, IDT) GB/T 10739 paper, paperboard and pulp sample processing and testing standard atmospheric conditions (GB/T 10739-2002, ISO 187. 1990, EQV) GB/T 24324 Pulp physical testing laboratory sheets prepared by conventional sheet former method GB/T 24325 Pulp Laboratory beating Wali (Valey) method beater GB/T 24326 method for preparing quick Kaiser pulp physical testing laboratory sheets Wet Solutions QB/T 1462 from pulp Laboratories QB/T 1463 beating pulp laboratory PFI mill method

3 Terms and Definitions

The following terms and definitions apply to this standard. 3.1 Tensile strength tensilestrength Under the conditions specified in this test method, before specimen fracture unit width can withstand the maximum tension. 3.2 Zero from zero-span The minimum distance between the two clamps. When the two fixture spacing is zero, the beam can penetrate between the fixture. 3.3 Zero-span tensile strength zero-spantensilestrength Under the conditions specified in this standard, using the appropriate instruments, when the distance between the clamp zero the measured tensile strength. 3.4 Zero span tensile index of zero-spantensileindex Zero-span tensile strength divided quantified. Note. When calculating temperature and humidity can be treated by using a quantitative or quantitative drying, but should be described in the test report. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 26460-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 26460-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 26460-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 26460-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.