GB/T 26415-2010 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 26415-2010: Dysprosium-iron alloy
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 26415-2010	139	Add to Cart	3 days	Dysprosium-iron alloy	Valid

Similar standards

GB/T 20892   GB/T 20168   GB/T 20169   GB/T 26413   GB/T 26414   GB/T 26412   

Basic data

Standard ID: GB/T 26415-2010 (GB/T26415-2010)
Description (Translated English): Dysprosium-iron alloy
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H65
Classification of International Standard: 77.120.99
Word Count Estimation: 6,673
Date of Issue: 2011-01-14
Date of Implementation: 2011-11-01
Quoted Standard: GB/T 8170; GB/T 26416.1; GB/T 26416.2; GB/T 26416.3; GB/T 26416.4; GB/T 26416.5
Regulation (derived from): National Standard Approval Announcement 2011 No.160
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the requirements for Dy alloy, test methods, inspection rules and signs, packaging, transport and storage. This standard applies to electrolysis, melt distribution method of production, for the production of NdFeB, Dy alloy Terfenol materials and other rare earth functional materials used.

GB/T 26415-2010: Dysprosium-iron alloy

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Dysprosium-iron alloy ICS 77.120.99 H65 National Standards of People's Republic of China Dy alloy Issued on. 2011-01-14 2011-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard by the National Standardization Technical Committee of rare earth (SAC/TC229) centralized. This standard by the Baotou Rare Earth Research Institute is responsible for drafting. This standard by the South Jiangxi Rare Earth High-tech Co., Institute of Rare Earth New Materials Co., Ltd. participated in the drafting. The main drafters. Zhang Zhihong, Chen Guohua, Xie Ping, Hou Fusheng, Xieli Yun, Zhang Yaojing. Dy alloy

1 Scope

This standard specifies the Dy alloy requirements, test methods, inspection rules and signs, packaging, transportation and storage. This standard applies to electrolysis, fused with the method of production, for the production of NdFeB, terbium, dysprosium iron magnetostrictive materials, rare earth functional materials Dy alloy material used.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 8170 repair value expressed about the rules and limit values \u200b\u200band judgment GB/T 26416 (all parts) Dy alloy chemical analysis method

3 Requirements

3.1 Chemical composition Dy alloy chemical composition shall be in accordance with Table 1. Demand side, such products have special requirements, supply and demand sides can be negotiated, and in close The same note. Table 1 product Trademark Chemical composition (mass fraction) /% RE Fe Dy/RE not less than Impurity content of not more than Rare earth impurities/RE Non-rare earth impurities C Si Ca Al Mg Ni O 105085 85.0 ± 1.0 margin 99.5 0.5 0.05 0.05 0.03 0.05 0.03 0.03 0.1 105080 80.0 ± 1.0 margin 99.5 0.5 0.05 0.05 0.03 0.05 0.03 0.03 0.1 105075 75.0 ± 1.0 margin 99.5 0.5 0.05 0.05 0.03 0.05 0.03 0.03 0.1 3.2 Appearance 3.2.1 Products for the cast alloy. 3.2.2 Products and fracture surface showed a silver-white, should be clean, no visible inclusions and oxide powder off. Test Method 4 Analysis of the chemical composition according to the provisions of GB/T 26416 were 4.1 products. 4.2 rounding off according to the provisions of GB/T 8170 will be. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 26415-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 26415-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 26415-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 26415-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.