GB/T 25973-2010 English PDFUS$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 25973-2010: Cleaner production audit in industrial enterprises -- Technical guidance Status: Valid
Basic dataStandard ID: GB/T 25973-2010 (GB/T25973-2010)Description (Translated English): Cleaner production audit in industrial enterprises -- Technical guidance Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Z04 Classification of International Standard: 13.020.01 Word Count Estimation: 12,155 Date of Issue: 1/10/2011 Date of Implementation: 5/1/2011 Quoted Standard: GB/T 3484; GB/T 12452; GB 17167 Regulation (derived from): Announcement of Newly Approved National Standards 2011 No. (No. 166 overall) 1 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This Standard specifies the industrial enterprises to develop cleaner production audit terms and definitions, basic principles, procedures, technical points, the preparation of the audit report. This Standard is applicable to industrial cleaner production audits. GB/T 25973-2010: Cleaner production audit in industrial enterprises -- Technical guidance---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Cleaner production audit in industrial enterprises. Technical guidance ICS 13.020.01 Z04 National Standards of People's Republic of China Industrial cleaner production audit technical guidelines Issued on. 2011-01-10 2011-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThe Standard Appendix A, Appendix B is an informative annex. The standard proposed by the Ministry of Industry and Information Technology Energy Saving and Comprehensive Utilization Department People's Republic of China. This standard is managed by the National Standardization Technical Committee on Environment (SAC/TC207) centralized. This standard drafting units. China National Institute of Standardization, Beijing Technology and Business University, Nanchang Aeronautical University, Beijing Science and Technology of the Environment and Energy has He Bike Limited, Research Center for Environment and Economic Policy Ministry of Environmental Protection, Beijing Jingcheng Jiayu Environmental Technology Limited Metallurgical clean production technologies Heart, energy saving central Beijing, China Research Institute of Petroleum Chemical Industry Co., Ltd. Beijing, China Light Industry Cleaner Production Centre. The main drafters of this standard. Liu Mei, Chen Liang, Lihan Ping, Wei Lian, Liu M, Zhao Yi Hung, Yang Xiaodong, Xuehan Ping, Qi Hongwei, Zhuyi Dan, Song Yun. Industrial cleaner production audit technical guidelines1 ScopeThis standard specifies the industrial enterprises to carry out clean production audit terms and definitions, preparation of basic principles, procedures, techniques, audit reports. This standard applies to industrial cleaner production audits.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 3484 General Principles of corporate balance energy GB/T 12452 Enterprise General water balance test GB 17167 energy use per unit of energy measuring instruments and General Manager3 Terms and DefinitionsGB/T 3484 and GB/T 12452 and established the following terms and definitions apply to this standard. 3.1 Clean Production Audit cleanerproductionaudit In accordance with certain procedures and methods, the production process to investigate and diagnosis, identification of material and energy loss to determine the characteristics of the site with links, Identify high energy consumption, high material consumption, low efficiency and heavy pollution of the reasons put forward to reduce the use of toxic and hazardous materials, production, improve efficiency, reduce energy consumption, Material consumption and waste generated by the program, and then the process of selection and implementation of technical, environmental and economic feasibility of cleaner production programs. Note. Refer to "Clean Production Audit Interim Measures." 3.2 Cleaner Production options cleanerproductionoption For every high energy consumption, high material consumption, low efficiency and heavy pollution causes from resource and energy, technology, equipment, process control, production Products, waste management and staff analyzed and proposed eight aspects of prevention and solutions. Note. according to their own business situation, cleaner production alternatives in accordance with the level of investment required to divide the cost of no/low cost options for medium/high cost alternative Program. 3.3 Cleaner production program cleanerproductionsolution Filter cleaner production alternatives from the no/low-cost programs easily clear line, and after a feasibility analysis demonstrated viable medium/high cost Program. Note. according to their own business situation, cleaner production program will be divided according to the level of investment required is no cost/low cost programs, medium/high cost projects.4 Basic Principles4.1 Authenticity Cleaner production audit should be based on objective information and data as real and effective basis. 4.2 integrity Should carry out clean production from resources and energy, technology, equipment, process control, product, waste management and personnel were eight areas Review. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25973-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 25973-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 25973-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25973-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
