GB/T 25961-2010 English PDF

US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25961-2010: Standard test method for corrosive sulfur in electrical insulating oils
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 25961-2010	169	Add to Cart	3 days	Standard test method for corrosive sulfur in electrical insulating oils	Valid

Similar standards

DB11/ 239   DB11/ 238   DL/T 1498.2   GB 2536   GB/T 32508   GB/T 28552   

Basic data

Standard ID: GB/T 25961-2010 (GB/T25961-2010)
Description (Translated English): Standard test method for corrosive sulfur in electrical insulating oils
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: E38
Classification of International Standard: 75.140
Word Count Estimation: 7,738
Date of Issue: 1/10/2011
Date of Implementation: 5/1/2011
Quoted Standard: GB/T 2480; GB/T 5096; GB/T 6682
Adopted Standard: ASTM D1275-2006, MOD
Regulation (derived from): Announcement of Newly Approved National Standards 2011 No. (No. 166 overall) 1
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies the electrical insulating oil petroleum corrosive sulfur compounds (inorganic and organic sulfides) detection method. This Standard is applicable to new and in with the petroleum-based electrical insulating oil.

GB/T 25961-2010: Standard test method for corrosive sulfur in electrical insulating oils

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Standard test method for corrosive sulfur in electrical insulating oils ICS 75.140 E38 National Standards of People's Republic of China Electrical insulating oil of corrosive sulfur test method Issued on. 2011-01-10 2011-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This revised standard adopts the American Society for Testing and Materials standard ASTMD1275-06 "electrical insulating oil corrosive sulfur test method." This standard redrafted according ASTMD1275-06. The standard Chapter 4 ASTMD1275-06 removed, and Chapter 8, Chapter 13, according to delete other chapters numbered sequentially adjusted. In order for China's national conditions, the use of this standard when ASTMD1275-06 made some changes. This standard ASTMD1275-06 The main technical differences are as follows. --- This standard adds "This standard applies" in Chapter 1, the ASTMD1275-06 the present standard 1.2 introduction; --- This standard ASTMD1275-06 removed in 1.3, because the unit used in this standard are SI units, standard Not repeated; --- The ASTMD1275-06 the contents of which 1.4 This standard warning to comply with the national standard preparation of regulations; Increase --- Chapter 2 reference standard GB/T 6682, as distilled water used in the cleaning process in the test bottle; --- In order to meet the requirements of national standard preparation of the ASTMD1275-06 in Chapter 4, the meaning and content as the use of this standard Introduction, reg number amended accordingly; --- The standard delete ASTMD1275-06 of 3.1 and Chapter 8 in relation to the method A, because ASTMD1275-06 A method for the technical contents have been transformed into China's petrochemical industry standards; --- Reagent chapter added petroleum ether, ethanol and distilled water for cleaning copper; --- The standard delete ASTMD1275-06 in Chapter 13 keywords. This standard by the National Standardization Technical Committee on products and lubricant oil (SAC/TC280) proposed. This standard by the National Standardization Technical Committee of petroleum products lubricants oil and lubricants and fuels Technical Committee (SAC / TC280/SC1) centralized. This standard is mainly drafted by. China National Petroleum Corporation Karamay lubricants Institute. Participated in the drafting of this standard. East China Electric Power Test & Research Institute Co., Ltd., China Petroleum & Chemical Corporation lubricants R & D (Shanghai) Center, Anhui Electric Power Research Institute. The main drafters. Zhang Qi, to be the people, Ma Shujie, Zhangling Jun, Peng Wei, Lin Bin, Li Yungang, Guo Chunmei, oriole.

Introduction

In many cases used in the insulating oil, it is easy to produce with a continuous metal contact corrosion. The presence of corrosive sulfur compounds can cause metal Material deterioration deterioration deterioration deterioration extent of this depends on the number and type of corrosive substances and the time and temperature and other factors. These non-detection Ideal impurities, if not quantitative detection is also an effective means of identifying hazardous substances. New and with petroleum-based electrical insulating oil may contain certain substances will corrode under certain conditions. This standard Under specified conditions, the copper in contact with the oil, in order to detect whether the free (elemental) sulfur and sulfide corrosion or the formation of a trend exists. Electrical insulating oil of corrosive sulfur test method Warning. This standard relates to certain hazardous materials, operations and equipment, but not for all of the safety issues are related to this recommendation. Therefore, the user before using the standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations related.

1 Scope

This standard specifies the electrical insulating oil, petroleum-based corrosive sulfur compounds (inorganic and organic sulfur compounds) detection method. This standard applies to new and used in the petroleum-based electrical insulating oil.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 2480 silicon carbide abrasive materials GB/T 5096 petroleum products copper corrosion test GB/T 6682 analytical laboratory use specifications and test methods (GB/T 6682-2008, ISO 3696. 1987, MOD)

3 Method Summary

The Deal with copper containing 220mL insulating oil into the sealed bottle thick-walled high temperature test at 150 ℃ holding 48h, test After the observation of the color change of copper, to determine the sulfur corrosion, caused by sulfide.

4 Apparatus and materials

4.1 Oven. temperature controlled at 150 ℃ ± 2 ℃. Preferably using a circulating thermostatic oven blast. 4.2 Test bottle. 250mL bottle neck thick-walled high-temperature test with internal threads. By a chemically resistant glass, test bottle neck Is threaded with with Viton "O" rings of PTFE (polytetrafluoroethylene) screw plug sealed to prevent air from entering. Figure 1. 4.3 Tweezers. stainless steel, flat head. 4.4 copper. purity of 99.9% and a thickness of 0.127mm ~ 0.254mm, non-polluting. 4.5 Abrasives. particle size of 63μm No. 240 sandpaper or emery cloth silicon carbide, silicon carbide powder 63μm, in line with GB/T 2480 of Claim.

5 Reagents

5.1 acetone. AR. 5.2 petroleum ether. AR. 5.3 ethanol. AR. 5.4 Distilled water. in line with GB/T 6682 in the three water requirements. 5.5 Nitrogen. purity of not less than 99.9%. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 25961-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 25961-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 25961-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 25961-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.