GB/T 25946-2010 English PDF

US$194.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25946-2010: Aluminium ores -- Experimental methods for checking the bias of sampling
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 25946-2010	194	Add to Cart	3 days	Aluminium ores -- Experimental methods for checking the bias of sampling	Valid

Similar standards

GB/T 24487   GB/T 23615.1   GB/T 25945   GB/T 25944   GB/T 25943   

Basic data

Standard ID: GB/T 25946-2010 (GB/T25946-2010)
Description (Translated English): Aluminium ores -- Experimental methods for checking the bias of sampling
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H30
Classification of International Standard: 73.060.40
Word Count Estimation: 10,172
Date of Issue: 2010-12-23
Date of Implementation: 2011-09-01
Quoted Standard: GB/T 25945-2010; GB/T 25949-2010
Adopted Standard: ISO 10226-1991, IDT
Regulation (derived from): National Standard Approval Announcement 2010 No.10 (Total No.165)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the sampling, the sampling error of bauxite according to GB/T 25945-2010/ISO 8685-1992 procedural requirements test methods. This standard applies to the bauxite sampling bias test.

GB/T 25946-2010: Aluminium ores -- Experimental methods for checking the bias of sampling

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Aluminium ores. Experimental methods for checking the bias of sampling ICS 73.060.40 H30 National Standards of People's Republic of China Bauxite Sampling bias test methods Aluminiumores- (ISO 10226.1991, IDT) Issued on. 2010-12-23 2011-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard uses the translation method identical with ISO 10226.1991 "Test Method bauxite sampling bias." This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized. This standard is drafted by. Aluminum Corporation of China Zhengzhou Research Institute, China Nonferrous Metals Industry Quality Standards and Metrology The amount of the Institute. The main drafters of this standard. Benji, Liyue Ping, Zhang Jie, Zhang Wei-hua, Li Jin. Bauxite Sampling bias test methods

1 Scope

This standard specifies according to GB/T 25945-2010/ISO 8685. sampling, sample bias 1992 for bauxite procedural requirements check Test methods. This standard applies to bauxite sampling bias test. NOTE. The method is also suitable in accordance with 25949-2010/ISO 6140 GB/T .1991 requirements for sample preparation, the standard deviation of the sample preparation test.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 25945-2010 bauxite sampling procedures (ISO 8685.1992, IDT) GB/T 25949-2010 bauxite sample preparation (ISO 6140.1991, IDT)

3 General

3.1 Test method given in this standard, the test methods to be (called Method B) the obtained results with the standard method (referred to as method A), The results were compared, from a technical point of view and experience that the test results Method A is not bias. By statistically speaking, there is no significant difference in the results of Method A and Method B obtained in the case, the method can be used as a conventional B method. NOTE. In this standard, with a t-distribution (singlet) assess the deviation at 5% significance level, the difference between the test results to determine the method B and method A random Occasional differences or statistical differences. The number of samples tested in pairs at least 20 groups. The requested data set depends on the number of data set 20 and the standard deviation of the difference according to Article 6 Determination of the deviation δ. Quality characteristics can be any physical or chemical quantity, is the most commonly used alumina, silica, and Moisture. One can not always be measured deviation parameters to be measured and the deviation of the plurality of parameters, especially those receiving more attention after some Parameters should ensure that no deviation. To test the quality characteristics to be determined before the start of the test. When parts of methods A and B samples taken from the neighborhood When heap near bauxite, preparing and testing samples should be carried out separately on each of the parts like reduction points. This standard does not apply to parts of the mixed sample data, sub-sample or population samples were compared. Article 6 test data analysis procedure described also applies to different locations (such as loading and unloading to ground) collected samples of the same batch of material Product results clearly possible deviations. 3.2 After conducting series of tests should be regular intervals and when there are changes in the quality of bauxite, repeat test; or when the device When bauxite supply changes, but also the need for repeat testing. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 25946-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 25946-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 25946-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 25946-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.