GB/T 25884-2010 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25884-2010: Measurement of characters for batrachia
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 25884-2010	189	Add to Cart	3 days	Measurement of characters for batrachia	Valid

Similar standards

SC/T 4030   GB 5009.261   GB/T 45060   GB/T 21044   GB/T 25888   

Basic data

Standard ID: GB/T 25884-2010 (GB/T25884-2010)
Description (Translated English): Measurement of characters for batrachia
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: B52
Classification of International Standard: 65.15
Word Count Estimation: 8,872
Date of Issue: 1/10/2011
Date of Implementation: 6/1/2011
Quoted Standard: GB/T 18654.2
Regulation (derived from): Announcement of Newly Approved National Standards 2011 No. (No. 166 overall) 1
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This Standard specifies the determination of morphological traits frogs terms and definitions, the required measurement equipment, sampling procedures, and the results of the determination. This Standard is applicable to conventional morphological structure determination of frogs.

GB/T 25884-2010: Measurement of characters for batrachia

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Measurement of characters for batrachia ICS 65.150 B52 National Standards of People's Republic of China Frogs morphological traits measured Issued on. 2011-01-10 2011-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

The standard proposed by the People's Republic of China Ministry of Agriculture. This standard by the National Standardization Technical Committee on Fisheries freshwater aquaculture subcommittee. This standard was drafted. Chinese Academy of Fishery Sciences, Yangtze River Fisheries Research Institute. The main drafters of this standard. Zhou Ruiqiong, Zou Shiping, Fangyao Lin. Frogs morphological traits measured

1 Scope

This standard establishes frogs morphological traits measured in terms and definitions, required measurement equipment, sampling procedures, and the results of determination. This standard applies to routine determination of frogs form structure.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 18654.2 Inspection of germplasm for cultured fishes - Part 2. Sampling Method

3 Terms and Definitions

The following terms and definitions apply to this standard. 3.1 Length bodylength Distance from snout to caudal end (see Figure 1 1). 3.2 Head length headlength Snout first, mandibular joint from the edge (see Figure 1 2). 3.3 Head width headwidth The maximum distance between the sides of the head jaw joints (see Figure 1 in 3). 3.4 Snout length snoutlength Rostral to the orbital distance of the leading edge (see Figure 1 in 4). 3.5 Nasal spacing internasalspace The distance between the left and right edges of the nose (see Figure 1 in 5). 3.6 Eye spacing interorbitalspace Around the narrowest distance between the inside of the eyelid margin (see Figure 1 in 6). 3.7 Upper eyelid wide uppereyelidwidth The maximum width of the upper eyelid (see Figure 1 7). 3.8 Eye diameter eyediameter Diameter of the inner edge of the orbit (see Fig. 1, 8). ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 25884-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 25884-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 25884-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 25884-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.