GB/T 25774.3-2023 English PDFUS$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 25774.3-2023: Test methods for welding consumables - Part 3: Preparation and testing of a fillet weld specimens for T-joint Status: Valid GB/T 25774.3: Historical versions
Basic dataStandard ID: GB/T 25774.3-2023 (GB/T25774.3-2023)Description (Translated English): Test methods for welding consumables - Part 3: Preparation and testing of a fillet weld specimens for T-joint Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J33 Classification of International Standard: 25.160.20 Word Count Estimation: 11,113 Date of Issue: 2023-11-27 Date of Implementation: 2024-06-01 Older Standard (superseded by this standard): GB/T 25774.3-2010 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 25774.3-2023: Test methods for welding consumables - Part 3: Preparation and testing of a fillet weld specimens for T-joint---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. ICS 25:160:20 CCSJ33 National Standards of People's Republic of China Replace GB/T 25774:3-2010 Examination of welding materials part 3: Preparation and inspection of T-joint fillet weld specimens (ISO 15792-3:2011,Weldingconsumables-Testmethods- Published on 2023-11-27 and implemented on 2024-06-01 State Administration for Market Regulation Released by the National Standardization Administration Committee Table of contentsPrefaceⅠ Introduction II 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 General 2 5 Base material for testing 2 6 Specimen preparation 2 7 Test piece inspection 3 8 Test report 5ForewordThe document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting: This document is Part 3 of GB/T 25774 "Inspection of Welding Materials": GB/T 25774 has released the following parts: ---Part 1: Preparation of mechanical properties specimens of steel, nickel and nickel alloy deposited metals; ---Part 2: Preparation of mechanical properties specimens for single-sided single-pass welding and double-sided single-pass welded joints of steel; ---Part 3: Preparation and inspection of T-joint fillet weld specimens: This document replaces GB/T 25774:3-2010 "Inspection of Welding Materials Part 3: Preparation and Inspection of T-Joint Fillet Weld Samples" "Experience", compared with GB/T 25774:3-2010, in addition to structural adjustments and editorial changes, the main technical changes are as follows: ---Added the measurement of weld concavity (see 7:2): This document is modified to adopt ISO 15792-3:2011 "Test methods for welding materials Part 3: Multi-position adaptation of welding materials fillet welds Ability and Root Penetration Classification Test": Compared with ISO 15792-3:2011, this document has made the following structural adjustments: ---Added a "Terms and Definitions" chapter: The technical differences between this document and ISO 15792-3:2011 and their reasons are as follows: ---Changed the scope (see Chapter 1) to adapt to my country's technical requirements; ---Added normative reference to GB/T 3375 (see Chapter 3) to adapt to my country's technical requirements and increase operability; ---Replaced ISO 6947 (see 6:2) with the normatively quoted GB/T 16672 to adapt to my country's technical requirements and increase operability; ---Added visual inspection and inspection requirements (see 7:1) to apply to my country's technical requirements; ---Added the requirement to inspect the fracture surface after the specimen is broken (see 7:3) to comply with my country's technical requirements; ---The content of the test report (see Chapter 8) has been changed to adapt to my country's technical requirements: The following editorial changes have been made to this document: ---In order to coordinate with the existing standards, the name of the standard is changed to "Inspection of Welding Materials Part 3: Preparation of T-joint fillet weld specimens" Preparation and Inspection": Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents: This document is proposed and coordinated by the National Welding Standardization Technical Committee (SAC/TC55): This document was drafted by: Harbin Welding Research Institute Co:, Ltd: of China Machinery Industry Group Co:, Ltd:, Tianjin Daqiao Welding Materials Group Co:, Ltd:, Kunming Shanjing Qun Welding Materials Technology Co:, Ltd:, Juli New Materials Technology (Rizhao) Co:, Ltd:, Sichuan Atlantic Welding Materials Co:, Ltd:, Tianjin City Jinqiao Welding Materials Group Co:, Ltd:, Yichang Monkey King Welding Wire Co:, Ltd: The main drafters of this document: Yang Zijia, Han Haijian, Tong Tianwang, Qiao Jichun, Jiang Yong, Xiao Huiying, Yin Man, Shi Baicheng: This document was first published in:2010 and this is the first revision:IntroductionThe mechanical properties, multi-position adaptability and root penetration of T-joint fillet welds are important indicators for the classification or inspection of welding materials: The specimen preparation process has a great impact on its final results: GB/T 25774 "Inspection of Welding Materials" standardizes the mechanical properties and preparation of T-joint fillet weld specimens, welding materials Product standards all quote this series of documents, and the unified requirements for sample preparation are conducive to the implementation of product standards: GB/T 25774 is welding materials The universal sample preparation method standard consists of the following three parts: ---Part 1: Preparation of mechanical properties specimens of steel, nickel and nickel alloy deposited metals: The purpose is to provide for the preparation of steel, nickel The test piece base material, preparation requirements, welding conditions and sample requirements required for arc welding welding materials deposited metal mechanical properties test specimens: ---Part 2: Preparation of mechanical properties specimens of single-sided single-pass welded and double-sided single-pass welded joints of steel: The purpose is to provide for the application The specimen master required for preparing mechanical properties specimens of single-sided single-pass welding and double-sided single-pass welding joints of steel arc welding materials: Materials, preparation requirements, welding conditions and sample requirements: ---Part 3: Preparation and inspection of T-joint fillet weld specimens: The purpose is to provide for the preparation of steel and nickel welding materials The test piece base material, preparation requirements and inspection requirements required for T-joint fillet weld specimens: When fillet welding is used as the welding material, testing and classification can be carried out in accordance with the provisions of this document: The provisions of this document are applicable to the evaluation of welding materials Methods for specimen preparation and test result evaluation for fillet weld tests based on welding position and root penetration requirements: The test described in this document The test conditions and specified test results should not be used as requirements for process qualification: Examination of welding materials part 3: Preparation and inspection of T-joint fillet weld specimens1 ScopeThis document specifies the base metal, test piece preparation, test piece inspection and test report for T-joint fillet weld testing of welding materials: This document is applicable to the test and evaluation of T-joint fillet welds of steel, nickel and nickel alloys and other welding materials: This document does not stipulate acceptance requirements, which shall be in accordance with relevant welding material product standards:2 Normative reference documentsThe contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document: GB/T 3375 Welding terminology GB/T 16672 Weld --- Working position --- Definition of inclination and angle (GB/T 16672-1996, idtISO 6947:1990)3 Terms and definitionsThe terms and definitions defined in GB/T 3375 and the following apply to this document: 3:1 Weld thickness calculation theoreticalthroat The thickness of the weld used when designing the weld: Note: For fillet welds, it is equal to the length of the perpendicular line from the vertex of the right angle to the hypotenuse in the largest right-angled isosceles triangle drawn within the cross-section of the fillet weld: It is also customary to It is called throat thickness: [Source: GB/T 3375-1994, 2:65, with modifications] 3:2 Weld convexity In the cross-section of a convex fillet weld, the maximum distance between the weld toe line and the weld surface: [Source: GB/T 3375-1994,2:66] 3:3 Weld concavity In the cross-section of a concave fillet weld, the maximum distance between the weld toe line and the weld surface: [Source: GB/T 3375-1994,2:67] 3:4 weld toeweldtoe The interface between the weld surface and the base metal: [Source: GB/T 3375-1994,2:68] ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25774.3-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 25774.3-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 25774.3-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25774.3-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 25774.3-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 25774.3-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
