GB/T 25761-2010 English PDF

US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25761-2010: Rolling bearings -- Combined needle roller bearings with angular contact ball bearings -- Boundary dimensions
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 25761-2010	149	Add to Cart	2 days	Rolling bearings -- Combined needle roller bearings with angular contact ball bearings -- Boundary dimensions	Valid

Similar standards

GB/T 25764   GB/T 25770   GB/T 25763   

Basic data

Standard ID: GB/T 25761-2010 (GB/T25761-2010)
Description (Translated English): Rolling bearings -- Combined needle roller bearings with angular contact ball bearings -- Boundary dimensions
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J11
Classification of International Standard: 21.100.20
Word Count Estimation: 5,544
Date of Issue: 2010-12-23
Date of Implementation: 2011-06-01
Quoted Standard: GB/T 274-2000; GB/T 6930-2002
Regulation (derived from): National Standard Approval Announcement 2010 No.10 (Total No.165)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the needle roller bearings and angular contact ball dimensions. This standard applies to the design and selection of bearings.

GB/T 25761-2010: Rolling bearings -- Combined needle roller bearings with angular contact ball bearings -- Boundary dimensions

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rolling bearings. Combined needle roller bearings with angular contact ball bearings. Boundary dimensions ICS 21.100.20 J11 National Standards of People's Republic of China Rolling needle roller and angular contact ball bearings Dimensions Issued on. 2010-12-23 2011-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee of Rolling (SAC/TC98) centralized. This standard was drafted. Luoyang Bearing Research Institute Co., Ltd., Zhenjiang Feiya bearing limited liability company. The main drafters of this standard. Xu Zhenyu, Song Xiaomei, He Jian. Rolling needle roller and angular contact ball bearings Dimensions

1 Scope

This standard specifies the needle roller and angular contact ball bearings (hereinafter referred to as bearings) dimensions. This standard applies to the combined bearing design and selection.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 274-2000 Rolling maximum chamfer dimensions (idt ISO 582.1995) GB/T 6930-2002 Rolling Vocabulary (ISO 5593.1997, IDT)

3 Terms and Definitions

Terms and definitions GB/T 6930-2002 established apply to this standard. 4 symbols (see FIG. 1, FIG. 2) The following symbols apply to this standard. Unless otherwise indicated, the values \u200b\u200bshown in the figure and symbol are shown in the table indicates the nominal size. B. Combined Bearing Width B1. bearings double half the total width of the inner ring D. outside diameter bearings d. inner diameter bearings r. chamfer dimension rsmin. smallest single chamfer dimension

5 structure type

5.1 needle roller and angular contact ball bearings structure type shown in Figure 1. 5.2 needle structure type and three-point contact ball bearing shown in Figure 2. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 25761-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 25761-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 25761-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 25761-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.