Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 25744-2010 PDF English

US$265.00 · In stock · Download in 9 seconds
GB/T 25744-2010: Metallographic examination for carburizing quenching and tempering of steel parts
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 25744-2010265 Add to Cart Auto, 9 seconds. Metallographic examination for carburizing quenching and tempering of steel parts Valid

Similar standards

GB/T 30583   GB/T 25745   GB/T 22560   GB/T 45983.1   

GB/T 25744-2010: Metallographic examination for carburizing quenching and tempering of steel parts


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT25744-2010
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 25.200 J 36 Metallographic examination for carburizing quenching and tempering of steel parts Issued on. DECEMBER 23, 2010 Implemented on. JUNE 01, 2011 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of PRC; Standardization Administration of PRC.

Table of Contents

Foreword... 3 1 Scope... 4 2 Normative references... 4 3 Terms and definitions... 4 4 Specimen... 5 5 Inspection items and inspection methods... 5 6 Rating of metallographic structure level... 6 7 Inspection equipment... 8 8 Inspection report... 8 Appendix A (Informative) General requirements for the metallographic inspection of steel gears by carburizing quenching and tempering... 9 Appendix B (Normative) Martensite level chart... 11 Appendix C (Normative) Retained austenite level chart (500×)... 13 Appendix D (Informative) Retained austenite level chart (1000×)... 15 Appendix E (Normative) Carbide level chart... 17 Appendix F (Informative) Morphology of inner oxidation... 20 Appendix G (Normative) Core structure level chart... 21

Foreword

Appendix B, Appendix C, Appendix E, Appendix G of this standard are normative appendixes. Appendix A, Appendix D, Appendix F are informative appendixes. This standard was proposed AND shall be under the jurisdiction of the National Heat Treatment Standardization Technical Committee (SAC/TC 75). Drafting organizations of this standard. Shanghai Machinery Manufacturing Technology Research Institute Co., Ltd., Guangdong Shichuang Metal Technology Co., Ltd. The main drafters of this standard. Chen Dehua, Yu Hui, Ren Songzan, Ye Jian, Dong Xiaohong, Ma Chunxia, Su Yuhui, Ha Shengnan. Metallographic examination for carburizing quenching and tempering of steel parts

1 Scope

This standard specifies the method for the inspection of the carburizing quenching and tempering metallographic structure of steel parts, the level of the metallographic structure, the determination of the effective depth of hardened layer of the carburizing quenching. This standard is applicable to workpieces, whose effective hardened layer depth is greater than 0.3 mm by carburizing quenching.

2 Normative references

The provisions in following documents become the provisions of this Standard through reference in this Standard. For the dated references, the subsequent amendments (excluding corrections) or revisions do not apply to this Standard; however, parties who reach an agreement based on this Standard are encouraged to study if the latest versions of these documents are applicable. For undated references, the latest edition of the referenced document applies. GB/T 7232 Terminology of metal heat treatment GB/T 9450 Steels - Determination and verification of the depth of carburized and hardened cases (GB/T 9450-2005, ISO 2639.2002, MOD) GB/T 13298 Metal - Inspection method of microstructure

3 Terms and definitions

The terms and definitions as defined in GB/T 7232, as well as the following terms and definitions, apply to this standard. 3.1 Core structure The structure in the area, which is 3 times the depth of the effective hardened layer of carburizing quenching from the surface.

4 Specimen

4.1 From the workpiece, take specimen in a representative service area, OR take a furnace specimen of the corresponding size. The surface roughness of the furnace specimen shall be the same as that of the workpiece. 4.3 The test surface shall be perpendicular to the surface of the carburized layer. 4.4 For specimens with special requirements, it shall be determined, through negotiation, between the supplier and the buyer. Regarding the requirements for tooth profile specimens, see Appendix A.

5 Inspection items and inspection methods

5.1 The inspection items and inspection methods are as shown in Table 1. 5.2 For the metallographic test, it shall prepare specimens according to GB/T 13298.The etchant is 4% nitric acid alcohol solution. 5.3 For the inspection and rating of metallographic structure, it shall be evaluated at the highest level. If it exceeds the highest level, it can be expressed as greater than level 6.

6 Rating of metallographic structure level

6.1 Levels of martensite According to the rated level of the size of the martensite needle body, carry out the rating, in comparison with the series of ratings in Figure B.1 in Appendix B. The rating's description is as shown in Table 2. 6.2 Level of retained austenite According to the rating level of the retained austenite content, refer to Figure 6.3 Levels of carbide According to the rating of the carbide form, quantity, size, distribution, carry out the rating, in comparison with the series of ratings in Figure E.1 in Appendix E. The description of rating is as shown in Table 4. 6.5 Levels of Core structure According to the rated level of morphology of the core structure, the size, shape and quantity of ferrite, carry out the rating according to the series of images in Figure G.1 of Appendix G. The description of rating is as shown in Table 6.

7 Inspection equipment

7.1 The Vickers hardness tester and the standard block shall pass the calibration. It shall be used within the calibration period.

8 Inspection report

The inspection report shall generally include the following.

Appendix A

(Informative) General requirements for the metallographic inspection of steel gears by carburizing quenching and tempering A.1 Specimen A.1.1 For the tooth-shaped workpiece, cut at least one complete tooth profile. It may also use cylindrical specimens OR simulated tooth thickness specimens. Cylindrical specimen's size. the minimum diameter is 6 times the modulus, BUT not less than 16 mm A.1.2 The test surface of the tooth profile specimen shall be on the normal section of the tooth. A.1.3 Except for the above description, all others shall be implemented, in accordance with Chapter 4 of the main text of this standard. A.2 Inspection items and inspection methods A.2.1 The measuring position of the effective hardened layer depth of the gear is generally on the normal section of the tooth width, in the direction along the vertical tooth surface at the index circle, OR according to the specific process documents. A.2.2 The inspection positions of the martensite and retained austenite are within 0.05 mm ~ 0.15 mm, from the surface of the carburized layer at the index circle of the tooth. A.3 Except for the above two provisions, all others shall be implemented in accordance with the text of this standard. Figure A.1 -- Schematic diagram of the inspection position of the core structure of large gear

Appendix B

(Normative) Martensite level chart The martensite level chart (500×) is as shown in Figure B.1.

Appendix C

(Normative) Retained austenite level chart (500×) The retained austenite level chart (500×) is as shown in Figure C.1.

Appendix D

(Informative) Retained austenite level chart (1000×) The retained austenite level chart (1000×) is as shown in Figure D.1.

Appendix E

(Normative) Carbide level chart The network and granular carbide level chart (500×) is as shown in Figure E.1.

Appendix F

(Informative) Morphology of inner oxidation The morphology of inner oxidation (500×) is as shown in Figure F.1.

Appendix G

(Normative) Core structure level chart The core structure level chart (500×) is as shown in Figure G.1. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 25744-2010 be delivered?Answer: The full copy PDF of English version of GB/T 25744-2010 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 25744-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25744-2010_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 25744-2010 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of GB/T 25744-2010?

A step-by-step guide to download PDF of GB/T 25744-2010_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 25744-2010".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9