GB/T 25680-2023 English PDFUS$499.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 25680-2023: Printing machinery - Horizontal die-cutting machine Status: Valid GB/T 25680: Historical versions
Basic dataStandard ID: GB/T 25680-2023 (GB/T25680-2023)Description (Translated English): Printing machinery - Horizontal die-cutting machine Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J87 Classification of International Standard: 37.100.10 Word Count Estimation: 24,254 Date of Issue: 2023-05-23 Date of Implementation: 2023-05-23 Older Standard (superseded by this standard): GB/T 25680-2010 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 25680-2023: Printing machinery - Horizontal die-cutting machine---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 37:100:10 CCSJ87 National Standards of People's Republic of China Replacing GB/T 25680-2010 Printing Machinery Horizontal Flat Press Die Cutting Machine Released on 2023-05-23 2023-05-23 Implementation State Administration for Market Regulation Released by the National Standardization Management Committee table of contentsPreface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Equipment type, basic parameters, naming and model establishment 2 4:1 Device type 2 4:2 Basic parameters 2 4:3 Naming and Modeling 2 5 requirements 3 5:1 Dry running performance 3 5:2 Paper feeding performance 3 5:3 Die-cutting performance 3 5:4 Cleaning performance 3 5:5 Machine Noise 3 5:6 Parallelism of upper and lower platforms 4 5:7 Security Protection 4 5:8 Electrical quality 6 5:9 Appearance quality 6 6 Test method 7 6:1 Test conditions 7 6:2 Test material 7 6:3 Measuring instruments 7 6:4 Dry running performance test 7 6:5 Paper feeding performance test 7 6:6 Die-cutting performance test 8 6:7 Waste cleaning performance test 9 6:8 Noise test 9 6:9 Parallelism test of upper and lower platforms 9 6:10 Safety protection inspection 10 6:11 Electrical quality test 10 6:12 Appearance quality inspection 10 7 Inspection rules 10 7:1 Factory inspection 10 7:2 Type inspection 11 8 Instruction manual, product certificate, signs and marks 11 9 Packaging, transportation and storage 12 9:1 Packaging 12 9:2 Transport 12 9:3 Storage 12 Appendix A (informative) Die-cut version for testing 13 A:1 Die-cut plate for measuring die-cutting accuracy13 A:2 Die-cut plates for checking the quality of die-cut finished products 13 Appendix B (informative) Noise measurement point location 15 Reference 16 Figure 1 Schematic diagram of the paper separator 5 Figure 2 Schematic diagram of hydraulic device and pressure sensor position 8 Figure 3 Schematic Diagram of Die Cut Line Deviation Measurement 9 Figure 4 Schematic diagram of placement of equal height blocks 10 Figure A:1 Schematic diagram of a die-cutting plate used to measure die-cutting accuracy 13 Figure A:2 Schematic diagram of die-cut plate used to check the quality of die-cut finished products 13 Figure A:3 Schematic diagram of semi-decontamination site 13 Figure A:4 Schematic diagram of the whole cleaning site 14 Figure B:1 Schematic diagram of the location of the measuring point 15 Table 1 Basic parameters 2 Table 2 Die-cutting machine performance requirements 3 Table 3 Parallelism requirements for upper and lower platforms 4 Table 4 Appearance quality requirements 6 Table 5 Correspondence between paper width and paper feeding speed8 Table 6 Factory inspection items 10 Table 7 Requirements for various signs11forewordThis document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting: This document replaces GB/T 25680-2010 "Printing Machinery Horizontal Die-cutting Machine": Compared with GB/T 25680-2010, except for In addition to structural adjustments and editorial changes, the main technical changes are as follows: a) The scope of application of the document has been changed (see Chapter 1, Chapter 1 of the:2010 edition); b) Added the chapter "Terms and Definitions" (see Chapter 3); c) Changed the classification basis of "equipment type" (see 4:1, 3:1 of the:2010 edition); d) Changed the content of "basic parameters" (see 4:2, 3:2 of the:2010 edition); e) Changed the required clause, and determined "model and name" as a recommended clause (see 4:3, 3:3 of the:2010 edition); f) Changed the expression method of "requirements" (see Chapter 5, Chapter 4 of the:2010 edition); g) Changed the expression content of "test method" (see Chapter 6, Chapter 5 of the:2010 edition); h) Changed the expression content of "inspection rules" (see Chapter 7, Chapter 6 of the:2010 edition); i) The chapter "Instructions for use, product certificates, signs and signs" has been added (see Chapter 8); j) Changed the expression content of "packaging, transportation and storage" (see Chapter 9, Chapter 7 of the:2010 edition): Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by China Machinery Industry Federation: This document is under the jurisdiction of the National Printing Machinery Standardization Technical Committee (SAC/TC192): This document is drafted by: Tianjin Evergreen Technology Group Co:, Ltd:, Bobst (Shanghai) Co:, Ltd:, Guowang Technology (Zhejiang) Co:, Ltd: Company, Shanghai Tobacco Packaging and Printing Co:, Ltd:, Tangshan Jiguo Printing Machinery Co:, Ltd:, Yutian County Juxing Printing and Packaging Machinery Manufacturing Co:, Ltd: Division, Yutian Zhongbo Printing Machinery Co:, Ltd:, Yutian Huatai Precision Machinery Co:, Ltd:, Yutian Shengtian Printing and Packaging Machinery Co:, Ltd:, Tangshan Jiayi Printing Machinery Co:, Ltd:, Tangshan Xinlian Printing Machinery Group Co:, Ltd:, Yutian County Chengyuan Printing and Packaging Machinery Co:, Ltd:, Rui Anshi Chuangbo Machinery Co:, Ltd:, Dali Meideng Printing Co:, Ltd:, Shandong Jinmai Material Technology Co:, Ltd:, Wenzhou Vocational and Technical College, China Printing Science and Technology Research Institute Co:, Ltd:, Xi'an University of Technology: The main drafters of this document: Guan Jingguo, Liu Dong, Wang Chengjie, Wang Jun, Zheng Liangxi, Wang Lei, Li Gang, Chen Yangyang, Wang Jinpeng, Guan Zhaohui, Liu Fengchao, Ye Liming, Tang Zhiquan, Yang Jian, Yang Chunjie, Wang Jiguo, Liu Hejing, Guan Zongyu, Sun Biao, Zheng Lisong, Zhang Jie, Zhou Shuyuan, Li Xia, Liu Xiaohua, Zhang Luliang, Yang Jianqing, Men Junyan, Zhou Shisheng, Dong Guirong, Lan Yujing, Yang Qian: This document was first published in:2010, and this is the first revision: Printing Machinery Horizontal Flat Press Die Cutting Machine1 ScopeThis document specifies the equipment type, basic parameters, naming and model establishment, requirements, test methods, inspection rules, Instructions for use, product certification, signs and signs, packaging, transportation and storage: This document applies to the design, development, manufacture and use of single-fed horizontal die-cutting machines (hereinafter referred to as "die-cutting machines"):2 Normative referencesThe contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document: GB/T 191 Packaging, storage and transportation icon marks GB 2894 Safety Signs and Guidelines for Their Use GB/T 3785:1 Electroacoustic sound level meters Part 1: Specifications GB/T 4728:1-2018 Graphical symbols for electrical diagrams - Part 1: General requirements GB/T 4879 Antirust Packaging GB/T 5226:1-2019 Electrical Safety of Machinery and Electrical Equipment Part 1: General Specifications GB/T 6388 Transport packaging receipt and delivery marks GB/T 7551-2008 load cell GB/T 8196-2018 General requirements for the design and manufacture of fixed and movable guards for mechanical safety guards GB/T 9969 General Rules for Instructions for Use of Industrial Products GB/T 13306 Signage GB/T 13384 General Technical Specifications for Packaging of Mechanical and Electrical Products GB/T 14436 General Rules for Warranty Documents of Industrial Products GB/T 16754-2021 Design Principles for Emergency Stop Function of Machinery Safety GB/T 19436:1-2013 Electrosensitive protective equipment for mechanical and electrical safety Part 1: General requirements and tests GB/T 19876-2012 The safety of machinery and the positioning of safety guards related to the approach speed of human body parts GB/T 22806-2008 white cardboard GB/T 28387:1-2012 Safety rules for the design and construction of printing machinery and paper converting machinery Part 1: General requirements3 Terms and DefinitionsThe following terms and definitions apply to this document: 3:1 Die-cutting machine A machine that rolls and cuts printed matter or other plate-shaped blanks into desired shapes or cuts according to the pattern of the die-cut plate: [Source: JB/T 11948-2014, 17:1, modified] ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25680-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 25680-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 25680-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25680-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 25680-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 25680-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
