GB/T 25397-2010 English PDF

US$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25397-2010: Agricultural machinery -- Rotary and flail mower -- Test methods and acceptance criteria for protective skirts
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 25397-2010	169	Add to Cart	3 days	Agricultural machinery -- Rotary and flail mower -- Test methods and acceptance criteria for protective skirts	Valid

Similar standards

GB/T 24674   GB/T 33006   GB/T 25409   GB/T 25396   GB/T 25401   GB/T 25393   

Basic data

Standard ID: GB/T 25397-2010 (GB/T25397-2010)
Description (Translated English): Agricultural machinery -- Rotary and flail mower -- Test methods and acceptance criteria for protective skirts
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: B91
Classification of International Standard: 65.060.50
Word Count Estimation: 7,723
Date of Issue: 2010-11-10
Date of Implementation: 2011-03-01
Quoted Standard: GB/T 2484; GB/T 6343
Adopted Standard: ISO 17103-2003, MOD
Regulation (derived from): National Standard Approval Announcement 2010 No.8 (Total No.163)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the agricultural rotary and flail mower protective Chui (skirt) test methods and acceptance.

GB/T 25397-2010: Agricultural machinery -- Rotary and flail mower -- Test methods and acceptance criteria for protective skirts

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Agricultural machinery. Rotary and flail mower. Test methods and acceptance criteria for protective skirts ICS 65.060.50 B91 National Standards of People's Republic of China Agricultural machinery Rotary and flail mowers Protective cover (skirt) Test methods and acceptance (ISO 17103.2003, MOD) Issued on. 2010-11-10 2011-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This revised standard adopts ISO 17103.2003 "Agricultural Machinery Rotary and flail mowers shield (skirt) test methods and acceptance criteria Income norms "(in English). This standard is based on ISO 17103.2003 redrafted, and ISO 17103.2003 is a technical difference. --- Cited international standards of our standards, but our standard is not equivalent to international standards. For ease of use, this standard also made the following editorial changes. --- "This International Standard" be replaced by "this standard"; --- Remove the ISO 17103.2003 Foreword. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee (SAC/TC201) Agricultural machinery centralized. This standard was drafted. Country farm machinery Quality Supervision and Inspection Center, Chinese Academy of Agricultural Mechanization Sciences Hohhot branch. The main drafters of this standard. Sun Jiamin, Yang Tiejun, LI Xiu-rong. Agricultural machinery Rotary and flail mowers Protective cover (skirt) Test methods and acceptance

1 Scope

This standard specifies the agricultural rotary mowers and flail guard (skirt) Test methods and acceptance specifications.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 2484 Bonded Abrasives - General requirements (GB/T 2484-2006, ISO 525.1999, MOD) GB/T 6343 and foam rubber Determination of apparent density (GB/T 6343-2009, ISO 845.2006, IDT) 3 protective cover (skirt) test 3.1 tensile test 3.1.1 Program Along the protective cover (skirt) of each specimen horizontal and vertical cut five width of 50mm, for each sample tested in the tensile testing machine. 250mm length of the sample to 11N/s rate of pulling force. 3.1.2 Acceptance If all the transverse and longitudinal tensile specimens subjected to average not less than 3000N, the test result is considered as acceptable. 3.2 anti-penetration test 3.2.1 Program From protective cover (skirt) on samples taken five round. Each sample is placed on the test device, and left a hole diameter of 100mm test Inspection area. Each sample was 1mm × 45 ° chamfer of 10mm × 10mm punch to 11N/s sample rate impact. 3.2.2 Acceptance When the average penetration of all the samples subjected to no less than 1000N, and the average penetration energy to bear all the samples is not less than 8N · m When the test result is considered as acceptable. 3.3 wear test 3.3.1 Program Along the protective cover (skirt) cut a piece of the entire height of the sample width of 200mm. The sample is placed on a friction machine, there is the free end of the sample 400cm2 placed on the surface of the grinding wheel. The width of the grinding wheel should be 200mm, a diameter of 800mm. Installed with a particle size of the abrasive belt 24 (GB/T 2484) of the grinding wheel, and so that it is 25r/min rotation speed. On the surface of 400cm2 of 5N load shall be applied. In order to obtain uniform pressure loading pad should match the shape of the grinding wheel, and should have a thickness 30mm, 35 density foam layer (see GB/T 6343). 3.3.2 Acceptance If the sample meets one of the following conditions, the test result is considered as acceptable. --- Of armored shields (skirts), after 10,000 rpm reinforced fibers are not worn out; --- Non-armored shields (skirts), its thickness after 10,000 rpm is still more than half of the original thickness. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 25397-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 25397-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 25397-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 25397-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.