GB/T 25379.1-2010 English PDF

US$399.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25379.1-2010: Modular units for machine tools -- Work holding pallets -- Part 1: Work holding pallets up to 800 mm nominal size
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 25379.1-2010	399	Add to Cart	3 days	Modular units for machine tools -- Work holding pallets -- Part 1: Work holding pallets up to 800 mm nominal size	Valid

Similar standards

GB/T 17587.3   JB/T 12396   GB/T 24344   GB/T 39829   GB/T 39954   GB/T 25379.2   

Basic data

Standard ID: GB/T 25379.1-2010 (GB/T25379.1-2010)
Description (Translated English): Modular units for machine tools -- Work holding pallets -- Part 1: Work holding pallets up to 800 mm nominal size
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J51
Classification of International Standard: 25.060.20
Word Count Estimation: 17,176
Date of Issue: 2010-11-10
Date of Implementation: 2011-03-01
Quoted Standard: GB/T 158-1996; GB/T 1182-2008; GB/T 1800.4-1999; GB/T 1804-2000
Adopted Standard: ISO 8526-1-1990, MOD
Regulation (derived from): National Standard Approval Announcement 2010 No.8 (Total No.163)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the pallet (hereinafter referred to as pallets) size. This section applies to the nominal size of 320mm, 400mm, 500mm, 630mm, 800mm square aspect ratio rectangular pallets and pallet 1. 25.

GB/T 25379.1-2010: Modular units for machine tools -- Work holding pallets -- Part 1: Work holding pallets up to 800 mm nominal size

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Modular units for machine tools Workholding pallets Part 1. Workholding pallets up to 800 mm nominal size ICS 25.060.20 J51 National Standards of People's Republic of China For machine tool workpiece pallet Part 1. The nominal size to 800mm Workpiece pallet Part 1. Workholdingpaletsupto800mmnominalsize (ISO 8526-1.1990, MOD) Issued on. 2010-11-10 2011-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 25379 "for machine tool workpiece pallet" is divided into two parts. --- Part 1. The nominal size to 800mm workpiece pallet; --- Part 2. nominal size greater than 800mm of the workpiece pallet. This is Part 1 GB/T 25379 of. The partial modification of the use of ISO 8526-1.1990 "for machine tool work holding pallets - Part 1. The nominal size to 800mm Workpiece pallet "(in English). For ease of use, this section do the following technical content and editorial changes. --- Will be the "standard" be replaced by "this section"; --- Remove the foreword and introduction of international standards; --- Use the decimal symbol instead of as a decimal comma ",". ","; --- To ISO 8526-1.1990 references other international standards, has been transformed with the international standard for our standard replaces the corresponding; --- The standard in the relevant figures, tables, layout position, and so the order of editorial changes; --- Standard sink hole size according to our standards has been modified. Appendix A of this section is normative appendix, Appendix B is an informative annex. This part is proposed by China Machinery Industry Federation. This part of the National Metal Cutting Machine Standardization Technical Committee (SAC/TC22) centralized. This section drafted by. Dalian Machine Tool Group, LLC. The main drafters of this section. Fucheng Yun, Liu Lianhua, Luo Xiuzhen. For machine tool workpiece pallet Part 1. The nominal size to 800mm Workpiece pallet

1 Scope

This section GB/T 25379 specifies the use of the machine the workpiece pallet (hereinafter referred to as pallet) size. This section applies to the nominal size of 320mm, 400mm, 500mm, 630mm, 800mm and an aspect ratio of square pallets 1.25 rectangular pallet.

2 Normative references

The following documents contain provisions which, through reference GB/T 25379 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 158-1996 machine table T-slots and corresponding bolts (eqv ISO 299. 1987) GB/T 1182-2008 Geometrical product specifications (GPS) geometric tolerances of form, orientation, location and runout tolerancing (ISO 1101.2004, IDT) GB/T 1800.4-1999 Limits and fits standard tolerance grades and limit deviations for holes and shafts of (eqv ISO 286-2. 1988) GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance tolerance (eqv ISO 2768-1. 1989)

3 Terms

3.1 Nominal size nominalsize With a predetermined nominal size pallet width dimension a1 is (see Fig. 3). 3.2 General term general Pallet terminology should be consistent with the relevant parts of the Figure 1 and Table 1. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 25379.1-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 25379.1-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 25379.1-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 25379.1-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.