GB/T 25295-2010 English PDFUS$629.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 25295-2010: Guidelines on safety designs for electric equipment Status: Valid
Basic dataStandard ID: GB/T 25295-2010 (GB/T25295-2010)Description (Translated English): Guidelines on safety designs for electric equipment Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K09 Classification of International Standard: 29.020 Word Count Estimation: 27,259 Date of Issue: 2010-11-10 Date of Implementation: 2011-05-01 Quoted Standard: GB 4208; GB/T 4776; GB/T 5465.2-2008; GB/T 22696.1; GB/T 22696.2; GB/T 22696.3 Regulation (derived from): Announcement of Newly Approved National Standards No. 8 of 2010 (total 163) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the following 1 000 V AC, DC 1 500 V electrical equipment following the basic principles of safety design requirements. This standard applies to electrical equipment safety design. Professional or product safety design should be based on appropriate standards. No professional or product safety design method, received on the basis standards. GB/T 25295-2010: Guidelines on safety designs for electric equipment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Guidelines on safety designs for electric equipments ICS 29.020 K09 National Standards of People's Republic of China Electrical equipment safety design guidelines Issued on. 2010-11-10 2011-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions Principle 4 Electrical Safety Design 1 4.1 Overview 1 4.2 Basic Guideline 1 4.3 Electrical safety design of the basic elements of 5 5 electrical safety design requirements 7 5.1 Environmental Adaptability design requirements 7 5.2 shock hazard protection of design requirements 9 5.3 indirect effects of energy, protection of external factors dangerous design requirements 17 5.4 Mechanical hazard protection design requirements 17 5.5 Electrical and mechanical connection design requirements 18 5.6 run the risk of protection design requirements 19 5.7 power control and prevent dangerous design requirements 20 5.8 logo design and specification requirements 21 References 23ForewordThis standard is based on GB 19517 "national electrical equipment safety technical specifications" to develop. The electrical safety standards by the National Standardization Technical Committee (SAC/TC25) and focal points. This standard drafting units. Electrical Machinery Industry Beijing Technology and Economy Institute, Shanghai Institute of electric tools, the Quartet Electric (Group) Ltd., Chint Electric Co., Ltd., Shanghai Electrical Apparatus Research Institute (Group) Co., Ltd., Shandong Ainol Instruments. The main drafters of this standard. Li Feng, leather bag, peak Libang Association, Fang Xiaoyan, Yu Ji Hui, Tian Heng, Zeng Yan Hong, Liu Jiang, Zhao Tao, Yan Jing-xin, Yang. Electrical equipment safety design guidelines1 ScopeThis standard specifies the following exchange 1000V, 1500V dc basic norms of safety for electrical equipment design requirements. This standard applies to the safety design of electrical equipment. Professional or safety design of the product should be based on appropriate standards. No professional or security product design methods can be based on This standard. Note 1. The electrical equipment including transmission, distribution, storage, measurement, monitoring, control, regulation, products and information technology conversion and consumption of electrical energy in combined therewith Electrical equipment, electrical equipment, electrical appliances. Note 2. Even if the designer in accordance with the contents of this standard to complete the design of electrical equipment, electrical equipment does not mean that compliance with the safety requirements. Electrical equipment Prepared only after the inspection or testing provisions, and after conformity assessment, it means that it is safe.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB 4208 housing protection (IP Code) (GB 4208-2008, IEC 60529.2001, IDT) GB/T 4776 Electrical Safety Terms GB/T 5465.2-2008 Graphical symbols for electrical equipment - Part 2. Graphical symbols (IEC 60417DB.2007, IDT) Security risk assessment and risk GB/T 22696 (all parts), electrical equipment reduced3 Terms and DefinitionsGB/T 4776 established the terms and definitions apply to this standard. Principle 4 Electrical Safety Design 4.1 Overview 4.1.1 National Electrical Safety laws and regulations, including mandatory standards, and its contents are identified in line with standard electrical equipment safety set The fundamental basis for the count, in line with the development of technical standards and constantly updated. NOTE. For example GB 19517, reflecting the difference between the concept of security and technology between human behavior, that is, "to use or otherwise by the manufacturer in advance under normal conditions See misuse under the conditions of use, you can legitimately claim some products, processes or services that have a certain degree of risk, but it will not endanger personnel Health, quality of the environment and so on. "Meet the standards set forth in its Appendix A, that is, all kinds of safety standards for professional products, the national mandatory technical specifications identified technical standard. In general, compliance is in compliance with national mandatory safety standard technical specification requirements, combined with the specific characteristics of professional products Technology, quantify requirements and capable of directing the product design stage to take the necessary preventive measures. 4.1.2 In the design process, the designers believe that if there is new risks and new risks to security posed significant risk, should be note. a) Analysis of the relationship between security and risk. Safety and risk go hand in hand and stored, security can not be exempt from all risk, ie the absolute Security is impossible. b) to make a judgment based on security risk assessment, according to the provisions of GB/T 22696 of. c) risk assessment and determine security is a very complex process, designers often difficult to have the ability to do it alone. 4.2 Basic guidelines 4.2.1 General principles of risk factors distinguish and safety requirements Risk Factors electrical equipment has its own risk factors and risk factors in the outside world. Their risk factors, such as risk of electric shock and so on. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 25295-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 25295-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 25295-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25295-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
