GB/T 25014-2010 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 25014-2010: Marine bulkhead gearing
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 25014-2010	229	Add to Cart	3 days	Marine bulkhead gearing	Valid

Similar standards

GB/T 37452   CB/T 4197   GB/T 11865   GB/T 45486   GB/T 45484   GB/T 25016   

Basic data

Standard ID: GB/T 25014-2010 (GB/T25014-2010)
Description (Translated English): Marine bulkhead gearing
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: U47
Classification of International Standard: 47.020.50
Word Count Estimation: 10,172
Date of Issue: 2010-09-02
Date of Implementation: 2010-12-01
Quoted Standard: GB/T 699; GB/T 700; GB/T 1176; GB/T 13384; GB/T 13871.4; HG/T 2069; HG/T 2811; JB/T 7942.1
Regulation (derived from): National Standard Approval Announcement 2010 No.4 (Total No.159)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the marine bulkhead drive device (hereinafter referred to as the transmission device) product classification, requirements, test methods, inspection rules, signs, packaging and transport. This standard applies to the transport of crude oil, designed cabin bulkhead pump petroleum products and liquid chemicals between the ship and the cabin (speed not greater than 3000 r/min) of the actuator, manufacturing, testing and acceptance.

GB/T 25014-2010: Marine bulkhead gearing

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Marine bulkhead gearing ICS 47.020.50 U47 National Standards of People's Republic of China Marine bulkhead drive device Issued on. 2010-09-02 2010-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

The standard proposed by China Shipbuilding Industry Corporation. This standard by the National Marine Machinery Standardization Technical Committee (SAC/TC137) centralized. This standard was drafted. China Shipbuilding Industry Corporation seventh THOUSAND AND FORTY Institute of Science and Technology Co., Ltd., Jiangsu Huayang Heavy Industries. The main drafters of this standard. Ding Yuhua, Shengwei Group, Xichong De, Wang Guojun. Marine bulkhead drive device

1 Scope

This standard specifies the marine bulkhead drive device (hereinafter referred to as gearing) product classification, requirements, test methods, inspection rules, marking Chi, packaging and transport. This standard applies to transport crude oil, petroleum products and pump room bulkhead liquid chemicals between the cabin and the ship (speed is less than 3000r/min) Gearing design, manufacturing, testing and acceptance.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 699 high-quality carbon structural steel GB/T 700 carbon structural steel (GB/T 700-2006, ISO 630.1995, Structuralsteels-Plates, wideflats, bars, sectionsandprofiles, NEQ) GB/T 1176 Cast Copper Alloys conditions (GB/T 1176-1987, neqISO 1338. 1977) GB/T 13384 mechanical and electrical products packaging General technical conditions GB/T 13871.4 sealing element is an elastomeric material rotary shaft lip seals - Part 4. Performance test procedures (GB/T 13871.4-2007, ISO 6194-4.1999, Rotaryshaftliptypeseals-Part 4. Performancetest procedures, MOD) HG/T 2069 Rotary shaft lip seals two axle radial force measurement technology conditions HG/T 2811 Rotary shaft lip seals rubber materials JB/T 7942.1 lever type grease gun

3 Product Categories

3.1 Structure type By cooling the transmission is divided into the following two categories. a) with water cooling vessel the S --- transmission type, see Figure 1; b) Marine air-cooled gear --- K type, shown in Figure 2. 3.2 Basic parameters The basic parameters of the S-type bulkhead drive apparatus are shown in Table 1; the basic parameters of type K in Table 2 bulkhead drive apparatus. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 25014-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 25014-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 25014-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 25014-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.