Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 24981.2-2020 PDF English

US$95.00 · In stock · Download in 9 seconds
GB/T 24981.2-2020: Test methods of rare earth long afterglow phosphors - Part 2: Determination of afterglow brightness
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

GB/T 24981.2: Historical versions

Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 24981.2-202095 Add to Cart Auto, 9 seconds. Test methods of rare earth long afterglow phosphors - Part 2: Determination of afterglow brightness Valid
GB/T 24981.2-2010239 Add to Cart 3 days Test methods of long afterglow phosphors activated by rare earths -- Part 2: Determination of relative brightness Obsolete

Similar standards

GB/T 20931.12   GB/T 24981.1   GB/T 18882.2   GB/T 31967.3   

GB/T 24981.2-2020: Test methods of rare earth long afterglow phosphors - Part 2: Determination of afterglow brightness


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT24981.2-2020
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.120.99 H 14 Replacing GB/T 24981.2-2010 Test methods of rare earth long afterglow phosphors - Part 2: Determination of afterglow brightness ISSUED ON: NOVEMBER 19, 2020 IMPLEMENTED ON: OCTOBER 01, 2021 Issued by: State Administration for Market Regulation; Standardization Administration of the People’s Republic of China.

Table of Contents

Foreword ... 3 1 Scope ... 5 2 Method principle ... 5 3 Terms and definitions ... 5 4 Instruments and devices ... 5 5 Sample preparation ... 6 6 Test procedures ... 6 7 Precision ... 7 Test methods of rare earth long afterglow phosphors - Part 2: Determination of afterglow brightness

1 Scope

This Part of GB/T 24981 specifies the determination method of afterglow brightness of rare earth long afterglow phosphors. This Part applies to the determination of the afterglow brightness of rare earth long afterglow phosphors.

2 Method principle

Use a light source of a color temperature of 5 500 K ~ 6 500 K as the excitation light source; use the specified illuminance to directly illuminate the sample. When the sample is excited and saturated, turn off the excitation light source; use a luminance meter to measure it; record the brightness value of the afterglow fluorescence of the sample at the specified time interval, to get the afterglow brightness of the sample.

3 Terms and definitions

The following terms and definitions are applicable to this document. 3.1 Saturating excitation The excitation light source is 5 500 K ~ 6 500 K light source (xenon lamp, fluorescent lamp, LED lamp). Extend the excitation time, and the afterglow brightness of the phosphor changes within 5%.

4 Instruments and devices

4.1 Illumination test device The illumination test device shall meet the following conditions: a) The measurement range is 10 lx ~ 1×105 lx; the accuracy shall meet the requirements of the national grade-1 illuminometer. 6.1.3 During the measurement process, except for the illumination of the excitation light source within the specified excitation time, stray light interference such as visible light or ultraviolet light is not allowed. 6.2 Illumination correction Turn on the light source and stabilize for 10 min ~ 30 min according to the requirements of the instrument. Place the photometric probe of the illumination test device on the sample to be excited; adjust the light source; ensure that the average illumination illuminating the tested sample is stable at 1 000 lx ± 5 lx or 25 lx ± 0.5 lx. 6.3 Afterglow brightness test 6.3.1 Load the sample into the sample pan; compact and make the surface flat. 6.3.2 Place the sample pan at the place to be excited, so that the sample is irradiated by the light source to reach a saturated excitation state; the excitation illumination on the test surface of the sample shall meet the requirements of 4.1c). 6.3.3 Turn off the light source; immediately use the afterglow brightness test device to test the afterglow brightness of the sample; record the afterglow brightness values of 10 min, 30 min, and 60 min. If the buyer has special requirements, the supplier and the buyer shall negotiate and determine. 6.3.4 Do 3 parallel tests; take the arithmetic average. The relative deviation of the test results shall not exceed 5%.

7 Precision

7.1 Repeatability For the measured values of the afterglow brightness of two independent tests that are obtained under repeatability conditions, within the average range given below, the absolute difference between these two test results does not exceed the repeatability limit (r); the case of exceeding the repeatability limit (r) is not more than 5%; the repeatability limit (r) is obtained by linear interpolation according to the data in Table 1. Table 1 – Afterglow brightness and repeatability limits of the long afterglow products ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 24981.2-2020 be delivered?Answer: The full copy PDF of English version of GB/T 24981.2-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 24981.2-2020_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24981.2-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 24981.2-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version GB/T 24981.2-2020?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 24981.2-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of GB/T 24981.2-2020?

A step-by-step guide to download PDF of GB/T 24981.2-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 24981.2-2020".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9