GB/T 24740-2009 English PDFUS$439.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 24740-2009: Technical product documentation -- Symbol of mechanical manufacture orientation and clamping Status: Valid
Basic dataStandard ID: GB/T 24740-2009 (GB/T24740-2009)Description (Translated English): Technical product documentation -- Symbol of mechanical manufacture orientation and clamping Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J04 Classification of International Standard: 01.100.01 Word Count Estimation: 19,198 Date of Issue: 2009-11-30 Date of Implementation: 2010-09-01 Quoted Standard: GB/T 1008; GB/T 4457.4; GB/T 4863 Regulation (derived from): Announcement of Newly Approved National Standards No. 14 of 2009 (No. 154 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies: Technical product documentation machining positioning support symbol (referred to as positioning symbol), auxiliary support symbols, symbols and common clamping position, the clamping device symbol (referred to as unit symbol) Type, painting and use requirements. This standard applies to the mechanical manufacturing industry to design products parts, machining process planning process equipment components in the preparation and use in the design task. GB/T 24740-2009: Technical product documentation -- Symbol of mechanical manufacture orientation and clamping---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Technical product documentation.Symbol of mechanical manufacture orientation and clamping ICS 01.100.01 J04 National Standards of People's Republic of China Technical product documentation Machining positioning, clamping notation Posted 2009-11-30 2010-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordAppendix A of this standard and Appendix B is an informative annex. This standard by the National Technical product documentation Standardization Technical Committee (SAC/TC146) and focal points. This standard was drafted. the machine Productivity Promotion Center, China Electronics Technology Group, Dalian Maritime University, Hefei University of Technology. The main drafters of this standard. thanks to Yang, Zhang Hongqi, Zou Yutang, Li Xue Jing, Pang Wei. Technical product documentation Machining positioning, clamping notation1 ScopeThis standard specifies the technical product documentation machining positioning support symbol (referred to locate symbols), auxiliary support symbols, symbols and clamping Commonly used for positioning and clamping apparatus symbol (symbol means short) the type of painting and use requirements. This standard applies to design products machinery manufacturing industry parts, mechanical parts process planning and preparation of process equipment design task book When in use.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 1008 basic terminology machining technology and equipment GB/T 4457.4 Mechanical drawings Fatou line (GB/T 4457.4-2002, ISO 128-24.1999, Technical drawings-Generalprinciplesofpresentation-Part 24. Linesonmechanicalengineeringdrawing, MOD) GB/T 4863 Machinery Manufacturing Technology Basic Terminology3 Terms and DefinitionsTerms and definitions GB/T 4863 and GB/T 1008 established in this standard applies.4 Symbol4.1 positioning support symbol Supporting and positioning the symbols shown in Table 1. Table 1 positioning support symbol Locate Support Types of symbol Independent Positioning co-sited In view of the marked contour line marked on the front view of a label in a view contour line marked on the front view of a Stationary Movable a view of the front face of the projection surface is a spectator. 4.2 auxiliary support symbol Table 2 Symbol auxiliary support. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 24740-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 24740-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 24740-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24740-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
