GB/T 24677.2-2009 English PDFUS$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 24677.2-2009: Boom sprayer -- Test methods Status: Valid
Basic dataStandard ID: GB/T 24677.2-2009 (GB/T24677.2-2009)Description (Translated English): Boom sprayer -- Test methods Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: B91 Classification of International Standard: 65.060.40 Word Count Estimation: 12,143 Date of Issue: 2009-11-30 Date of Implementation: 2010-04-01 Quoted Standard: GB/T 17677; GB/T 24680-2009; GB/T 20183.2-2006; GB/T 20183.3-2006; JB/T 9782 Regulation (derived from): National Standard Approval Announcement 2009 No.14 (Total No.154) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the spraying of pesticides, herbicides, fungicide, technical parameters of growth regulators and foliar feed and other uses of boom sprayer determination, method performance test and reliability test. This section applies to tractor hanging, towed boom sprayer (hereinafter referred to as "spray machine"). Other types of boom sprayer can refer to adopt. GB/T 24677.2-2009: Boom sprayer -- Test methods---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Boom sprayer. Test methods ICS 65.060.40 B91 National Standards of People's Republic of China Test methods for sprayer boom Posted 2009-11-30 2010-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordAppendix A of this section is an informative annex, Annex B normative appendix. This part is proposed by China Machinery Industry Federation. This part of the National Standardization Technical Committee on Agriculture machinery centralized. This section is drafted. Modern Agricultural Equipment Co., Ltd., Chinese Academy of Agricultural Mechanization Sciences, Ministry of Agriculture, Nanjing Agricultural Machinery The Institute, Taizhou Regal Agricultural Machinery Co., Ltd., Zhejiang Agricultural Industries Limited. The main drafters of this section. Netherlands Wing Yan, Liu Shumin, Chen Jun Bao, Fuxi Min Tang root method, Wang Hongren. Test methods for sprayer boom1 ScopeThis section GB/T 24677 specifies the spraying of insecticides, herbicides, fungicides, growth regulators and foliar fertilizer and other uses of the boom Technical parameters sprayer determination method performance test and reliability test. This section applies to tractor hanging, traction boom sprayer (hereinafter referred to as "the sprayer"). Other types of lance The sprayer can refer adopted.2 Normative referencesThe following documents contain provisions which, through reference GB/T 24677 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research into an agreement to use the latest versions of these documents. For undated references, the latest version applies to This section. GB/T 17677 Equipment for crop protection drip-proof measuring device (GB/T 17677-1999, idtISO 6686.1995) GB/T 24680-2009 agricultural sprayer boom stability test method (ISO 14131.2005, IDT) GB/T 20183.2-2006 Machinery Plant protection spraying equipment - Part 2. Test methods for hydraulic sprayers (ISO 5682-2. 1997, IDT) GB/T 20183.3-2006 crop protection - Spraying equipment - Part 3. Hydraulic agricultural sprayer - regulating the amount of fluid per hectare System test method (ISO 5682-3.1996, IDT) JB/T 9782 Common test methods for plant protection machinery3 Test conditions3.1 test medium In addition to the media otherwise specified, the test medium at room temperature without solid impurities to clean water. 3.2 Temperature and humidity During the test, the temperature should be between 0 ℃ ~ 40 ℃, relative humidity should not be less than 50%, the temperature and relative humidity shall be recorded in the test report. 3.3 Commissioning Before the test, the sample for the machine should use the provisions of the specification, installation and commissioning, commissioning 20min, makes equipment to reach a normal state Only after the test. 3.4 instruments and equipment The main test equipment, test equipment should be within the period of validity or to verify compliance with its main measuring minimum accuracy must meet Table 1 requirements. Table 1 Determination of the accuracy of the main parameters Measurement accuracy requirements Parameter Description Length 1mm Angle of ± 1 ° Speed \u200b\u200b± 0.5% is recommended to use a digital tachometer Torque ± 1% Digital Torque recommended tachometer Time ± 1s recommended the use of electronic stopwatch ...... |
