GB/T 24293-2009 English PDF

US$599.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 24293-2009: Digital thermostatic faucet
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 24293-2009	599	Add to Cart	5 days	Digital thermostatic faucet	Valid

Similar standards

GB 28379   QB/T 5418   GB 28378   GB/T 44212   GB/T 44180   GB/T 42802   

Basic data

Standard ID: GB/T 24293-2009 (GB/T24293-2009)
Description (Translated English): Digital thermostatic faucet
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Y71
Classification of International Standard: 91.060
Word Count Estimation: 26,285
Date of Issue: 2009-07-31
Date of Implementation: 2010-03-01
Quoted Standard: GB/T 1176; GB/T 2423.1; GB/T 2423.2; GB/T 2423.3; GB/T 2828.1; GB/T 2829; GB 4208; GB/T 5121; GB/T 5231; GB/T 5270; GB/T 6461-2002; GB/T 7306.1; GB/T 7306.2; GB/T 7307; GB/T 9286; GB/T 10125; GB/T 12600; GB 14536.1-2008; GB/T 17219; GB 18145; GB/T 23448; HG/T 3090; HG/T 3091; HG/T 3097
Adopted Standard: EN 817-2008, NEQ
Regulation (derived from): National Standard Approval Announcement 2009 No.9 (Total No.149)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the digital thermostat faucets (hereinafter referred to as " Tap ") terms and definitions, classification and labeling, conditions of use, requirements, test methods, inspection rules and signs, packaging, transport and storage. This standard applies to nominal pressure of not more than 0. 6 MPa, water temperature not greater than 85��C, installed in the washroom (toilet, bathroom), kitchen, hospitals, hotels and other places to use, the water temperature is controlled by preset temperature thermostatic faucets NC.

GB/T 24293-2009: Digital thermostatic faucet

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Digital thermostatic faucet ICS 91.060 Y71 National Standards of People's Republic of China NC thermostatic faucets Posted 2009-07-31 2010-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard EN817.2008 "Mechanical Bathroom faucet mixing valve (PN10) General technical requirements" of the non-equivalent, Also refer to the ASSE1016-2005 "shower and bathtub/shower valve automatically compensates for performance requirements", EN1111.1998 "Water Temperature Mouth (PN10) General technical requirements ", EN1287.1999" about the contents of low water pressure thermostat faucets General technical conditions "and other foreign advanced standards. The Standard Appendix A, Appendix B, Appendix C, Appendix D, Appendix E, Appendix F for the normative appendix, Appendix G, Appendix H for information only appendix. The standard proposed by China National Light Industry Council. This standard by the National Standardization Technical Committee, hardware architectural hardware sub-technical committee. This standard is drafted by. Shenluda Group Limited. Participated in the drafting of this standard. National Light Industry architectural hardware quality supervision and inspection center, brilliant Plumbing Group Co., Ltd., the buildings materials Group Co., Ltd., Ningbo Ai Ke US copper valve Co., Ltd., Guangzhou Moen Plumbing Equipment Co., Ltd. Zhejiang World water control, Heshan City, Kang Liyuan bathroom Industrial Co., Ltd., and plumbing and sanitary ceramics National Product Quality Supervision and Inspection Center, the State Building Materials Industry Building Plumbing Hardware Product Quality Supervision and Testing Center, the state irrigation and drainage water and water-saving equipment Quality Supervision and Inspection Center, the state building and sanitary ceramic Porcelain Quality Supervision and Inspection Center, Nanhai District of Foshan City, Standardization Research and Promotion Center, Shanghai Institute of Architectural Hardware Industry Co., Ltd. The main drafters of this standard. Hong Guangming, Xieming Shun, Wang Jianye, Cai Jilin, Zhengxue Zhen, Chen Wei open, Lin Yuehua, Wong Kee source, Lin Huafu, Shi Hongwei, Zhu double four, the first section of the lake, Yang Yining, Hongjian city, Chen Zhiqiang, who Yuqin, Linbu Sheng, who was born, Zhouming Fang, Zhou, Huang Yi, Meida An, Liang Xin into. NC thermostatic faucets

1 Scope

This standard specifies the NC thermostat faucets (hereinafter referred to as "Tap") terms and definitions, classification and labeling, conditions, requirements, test side Method, inspection rules and signs, packaging, transportation and storage. This standard applies to nominal pressure not more than 0.6MPa, hot water temperature no higher than 85 ℃, installed in the bathroom (toilet, shower), kitchen Housing, hospitals, hotels and other places use, the water temperature preset by the NC thermostat temperature control faucets.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 1176 Cast Copper Alloys conditions GB/T 2423.1 electric and electronic products environmental testing procedures - Part 2. Test methods Test A. Cold Test Method GB/T 2423.2 Basic environmental testing procedures for electric and electronic products - Part 2. Test methods Test B. high-temperature test methods GB/T 2423.3 electric and electronic products environmental testing procedures - Part 2. Tests - Test Cab. Damp heat test GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan GB/T 2829 Periodic inspection Sampling procedures and sample forms (for inspection of process stability) GB 4208 housing protection (IP Code) GB/T 5121 (all parts) of copper and copper alloys - GB/T 5231 Wrought copper and copper alloy chemical composition and shape of the product Test Method Review Metallic coatings electrodeposited layer and chemically deposited layer adhesion strength GB/T 5270 on the metal substrate Rating of GB/T 6461-2002 metallic coating on the substrate as a cathode cover layer plating corrosion test specimens Part 1 GB/T 7306.1 55 ° sealing pipe thread. inner cylindrical thread and taper external thread Part 2 GB/T 7306.2 55 ° sealing pipe thread. inner Taper internal and external threads GB/T 7307 55 ° non-sealing pipe thread Cut test GB/T 9286 Paints and varnishes GB/T 10125 artificial atmosphere corrosion test salt spray test GB/T 12600 Metallic coatings on plastic nickel plus chromium coatings GB 14536.1-2008 household and similar electrical controls - Part 1. General requirements GB/T 17219 in drinking water safety equipment and protective materials evaluation criteria GB 18145 ceramic seal faucets GB/T 23448 sanitary ware hose The general provisions of HG/T 3090 molded and extruded rubber products appearance quality HG/T 3091 rubber seals, drainage and sewerage pipelines - Interface ring material specification HG/T 3097 rubber seals or less 110 ℃ hot water supply pipe nipple ring material specification

3 Terms and Definitions

The following terms and definitions apply to this standard. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 24293-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 24293-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 24293-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 24293-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.