GB/T 24265-2014 PDF EnglishUS$85.00 · In stock · Download in 9 seconds
GB/T 24265-2014: Diatomite filter aid for industrial Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 24265: Historical versions
Similar standardsGB/T 24265-2014: Diatomite filter aid for industrial---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT24265-2014GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 73.080 Q 69 Replacing GB 24265-2009 Diatomite filter aid for industrial Issued on. JUNE 24, 2014 Implemented on. FEBRUARY 1, 2015 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration Committee. Table of ContentsForeword... 3 1 Scope... 5 2 Normative references... 5 3 Terms and definitions... 5 4 Classification and marking... 6 5 Requirements... 6 6 Test methods... 7 7 Inspection rules... 11 8 Marks... 12 9 Package, transport and storage... 12 Appendix A... 13ForewordThis Standard was drafted in accordance with the rules given in GB/T 1.1-2009. This Standard replaces GB 24265-2009 “Diatomite filter aids”. Compared with GB 24265-2009, the main technical changes are as follows. - Modified the property of standard from “mandatory” to “recommendatory”, the name from “Diatomite filter aids” to “Diatomite filter aid for industrial”; - Modified “baked diatomite” to “calcined diatomite”; representation symbol was modified from “BS” to “DS” as well (refer to 3.2, 3.3 of this Edition; 3.2 and 3.3 of 2009 Edition); - Models were merged and modified from 15 to 3 (refer to 4.1.2 of this Edition; 4.1.2 of 2009 Edition); - Modified marking mode (refer to 4.2 of this Edition; 4.2 of 2009 Edition); - Deleted quality requirements for diatomite filter for food and medicine as well as corresponding test methods (refer to 5.1 of 2009 Edition); - Deleted provisions on appearance color; made appropriate modification on requirements for microstructure (refer to Table 2 and Table 3 of 2009 Edition); - Modified requirements for moisture indicator from “≤0.5%” to “≤3.0%” (refer to Table 2 and Table 3 of 2009 Edition); - Modified requirements for water soluble indicator from “≤0.5%” to “≤0.8%” (refer to Table 2 and Table 3 of 2009 Edition); - Modified requirements for silicon oxide from “≥85%, ≥82%, ≥80%” to “≥85%, ≥80%, ≥75%” respectively (refer to Table 2 and Table 3 of 2009 Edition); - Deleted indicator requirements for ferric oxide, aluminum oxide, calcium oxide, and magnesium oxide; it was modified as “Other chemical components shall be determined by the seller and the buyer after negotiation” (refer to Table 2 and Table 3 of 2009 Edition); - Made appropriate modification on inspection method for microstructure (refer to 6.1 of this Edition; 6.1 of 2009 Edition); - Refined requirements for permeability measuring device (refer to 6.2.1 of this Edition; 6.2.1 of 2009 Edition); - Modified determination method of water soluble from “referring to standards” to “being specifically given” (refer to 6.4 of this Edition; 6.4 of 2009 Edition); - Modified determination method of pH value from referring to “GB 14936” to “JC/T 414” (refer to 6.5 of this Edition; 6.5 of 2009 Edition); - Modified determination method of tap density from referring to “GB/T 21354” to “JC/T 414” (refer to 6.6 of this Edition; 6.6 of 2009 Edition); - Deleted determination methods of hydrochloric acid soluble, loss on ignition, hydrofluoric acid residue, ferric oxide, aluminum oxide, calcium oxide, magnesium oxide, soluble iron, lead and arsenic (6.6, 6.7, 6.8, 6.11, 6.12, 6.13, 6.14, 6.15 and 6.16 of 2009 Edition); - Modified batch number from “30t” to “500t” (refer to 7.2 of this Edition; 7.2 of 2009 Edition); - Added provisions. “Storage period is 36 months” (refer to 9.2.3). This Standard was proposed by China Building Materials Federation. This Standard shall be under the jurisdiction of National Technical Committee on Nonmetallic Mineral Products of Standardization Administration of China (SAC/TC 406). The drafting organizations of this Standard. Qingdao Chuanyi Diatomite Co., Ltd, Qingdao Three-Star Diatomite Co., Ltd., Xianyang Non-metallic Mineral Research Institute Limited, National Non-metallic Mineral Product Quality Supervision and Inspection Center, and Baishan Institute of Product Quality Inspection. Main drafters of this Standard. Shang Xingchun, Dong Bozhen, Li Chunchang, Tang Chongming, Shi Xiaoying and Zhang Xiaoman. This Standard replaces the following previous standard. - GB 24265-2009. Diatomite filter aid for industrial1 ScopeThis Standard specifies terms and definitions, classification and marking, requirements, test methods, inspection rules, marks, package, transport and storage of diatomite filter aid for industrial. This Standard is applicable to diatomite filter aid for industrial of which the main raw material is diatomite and is made by calcination or flux calcination.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. JC/T 414 Diatomite3 Terms and definitionsThe following terms and definitions apply to this Standard. 3.1 Permeability The volume of filtrate per filter cake thickness of per filter area at per unit time when filtrate viscosity is 1 cP and filtration layer pressure is 101325 Pa. 3.2 Calcined diatomite The product that is made of diatomite by calcination at 650°C ~ 1000°C, grinding and classification.4 Classification and marking4.1 Classification 4.1.1 Diatomite filter aid for industrial is classified into calcined diatomite filter aid (represented by DS) and flux calcined diatomite filter aid (represented by ZDS), according to processing method. 4.2 Marking The marking of diatomite filter aid for industrial is written according to product name, standard number, calcination mode, model, and grade order.5 RequirementsPhysical and chemical indicators of diatomite filter aid for industrial shall comply with the provisions in Table 2.6 Test methods6.1 Inspection of microstructure 6.2 Determination of permeability 6.2.1 Apparatus Requirements are as follows. 6.2.2 Test procedures 6.3 Determination of moisture Conduct according to JC/T 414. 6.4 Determination of water soluble 6.5 Determination of pH value Conduct according to JC/T 414. 6.6 Determination of tap density Conduct according to JC/T 414. 6.7 Determination of silicon oxide Conduct according to JC/T 414.7 Inspection rules7.1 Inspection classification 7.1.1 Factory inspection Factory inspection items are permeability, moisture and tap density. 7.2 Batching principle Every 500 t of diatomite filter aid for industrial of same category, same grade and in continuous production shall be one batch. If it were less than 500 t, it shall be regarded as one batch. 7.3 Sampling method Regard bag as sampling unit. Use equidistant sampling. take one bag from every n-1 bag (n=N/20; N is the total number of bags of this batch of products, n takes integer). 7.4 Sample storage After completely mixing, the collected sample shall be divided into two portions by coning and quartering. Respectively place them into clean and dry wild- mouth jars. 7.5 Determination rules When all quality indicators of product comply with requirements in Clause 5, this batch of products shall be determined as qualified. If one or more than one quality indicator failed for the requirements in Clause 5, it shall re-conduct sampling and inspection for the unqualified item. When results of re-inspection all meet requirements in Clause 5, this batch of products shall be determined as qualified; otherwise it shall be unqualified.8 Marks8.1 Product identification, net mass, manufacturer’s name and address, marks of rainproof, moisture proof and sun block shall be indicated on outer package of diatomite filter aid for industrial.9 Package, transport and storage9.1 Package Diatomite filter aid for industrial shall be packaged in bags. Packaging bag is attached with backing film, topical bag or kraft paper bag. Exhaust air before package sealing. 9.2 Transport and storage 9.2.1 During transport, the product shall be protected from rain, snow, sun, moisture, stress, pollution and man-made damage; throwing and pulling with an iron hook are not allowed during loading and unloading.Appendix A(Informative) The relationship between water temperature and viscosity coefficient The relationship between water temperature and viscosity coefficient is shown in Table A.1. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 24265-2014 be delivered?Answer: The full copy PDF of English version of GB/T 24265-2014 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 24265-2014_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24265-2014_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 24265-2014 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 24265-2014?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 24265-2014 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 24265-2014?A step-by-step guide to download PDF of GB/T 24265-2014_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 24265-2014". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
