GB/T 2423.3-2016 PDF EnglishUS$125.00 · In stock · Download in 9 seconds
GB/T 2423.3-2016: Environmental testing - Part 2: Testing method - Test Cab: Damp heat, steady state Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 2423.3: Historical versions
Similar standardsGB/T 2423.3-2016: Environmental testing - Part 2: Testing method - Test Cab: Damp heat, steady state---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT2423.3-2016 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 19.040 K 04 GB/T 2423.3-2016 / IEC 60068-2-78.2012 Replacing GB/T 2423.3-2006 Environmental testing - Part 2.Testing method – Test Cab. Damp heat, steady state (IEC 60068-2-78.2012, Environmental testing - Part 2-78.Tests - Test Cab. Damp heat, steady state, IDT) Issued on. DECEMBER 13, 2016 Implemented on. JULY 1, 2017 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration Committee. Table of ContentsForeword... 3 Introduction... 5 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 6 4 General test procedure... 6 5 Measurements... 9 6 Information to be given in the relevant specification... 9 7 Information to be given in the test report... 10 Annex NA (Informative) Parts of GB/T 2423... 12ForewordParts of GB/T 2423 are shown in the informative Annex NA. This Part is the 3rd part of GB/T 2423. This Part was drafted in accordance with the rules given in GB/T 1.1-2009. This Part replaces GB/T 2423.3-2006 Environmental testing for electric and electronic products - Part 2.Testing method test Cab. Damp heat Steady state. Compared with GB/T 2423.3-2006, the main technical changes are as follows. - rearranged the structure of this Part; - added the Introduction and Clause 7 “Information to be given in the test report”; - modified the 7th line of 4.1 from “water utilized to maintain humidity levels has electrical conductivity of not more than 500 Ω•m” to “water utilized to maintain humidity levels has electrical conductivity of not more than 20 μS/cm”; - deleted the specific requirements for recovery conditions in “recovery” in Clause 9 of GB/T 2423.3-2006. This Part uses translation method to identically use IEC 60068-2-78.2012 Environmental testing - Part 2-78.Tests - Test Cab. Damp heat, steady state. The Chinese documents which have consistency with the international normative reference in this Part are as follows. - GB/T 2421.1-2008, Environmental Testing for Electric and Electronic products ― General and Guidance (IEC60068-1.1988, IDT); - GB/T 2424.6-2006, Environmental testing for electric and electronic products - Confirmation of the performance of temperature/humidity chambers (IEC60068-3-6.2001, IDT); - GB/T 16499-2008, The Preparation of safety publication and the use of basic safety publications and group safety publications (IEC104Guidance.1997, NEQ). Compared with IEC 60068-2-78.2012, this Part made the following editorial modifications. - modified the name of this Part to “Environmental testing - Part 2.Testing method - Test Cab. Damp heat, steady state”; - added the informative Annex NA “Part of GB/T 2423”. This Part was proposed by and shall be under jurisdiction of National Technical Committee on Environmental Conditions and Environmental Testing of Electrical and Electronic Products of Standardization Administration of China (SAC/TC 8). The drafting organizations of this Part. China Electric Apparatus Research Institute, Jining Semiconductor and Display Product Quality Supervision and Inspection Center, Power Grid Research Institute of Guangdong Power Grid Co., Ltd., China National Aviation Corporation Beijing Great Wall Metrology and Testing Technology Research Institute, Wuxi Sunan Experimental Equipment Co., Ltd. Main drafters of this Part. Xu Xuedong, Huang Kaiyun, Yan Kai, Lv Wangyan, Lv Guoyi, Ni Yiming, Fu Qiang. Versions of standard substituted by this Standard are. - GB/T 2423.3-1981, GB/T 2423.3-1993, GB/T 2423.3-2006; - GB/T 2423.9-1989, GB/T 2423.9-20011 ScopeThis Part of GB/T 2423 establishes a test method for determining the ability of components or equipment to withstand transportation, storage and use under conditions of high humidity.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.3 Terms and definitionsNone.4 General test procedureThe test severity is defined by a combination of temperature, relative humidity (RH) and total test duration. Unless otherwise specified in the relevant specification, temperature and RH severities may be selected from the following.5 MeasurementsThe specimen shall be visually inspected and electrically and mechanically checked, as required by the relevant specification. The specimen shall be visually inspected and electrically and mechanically checked, as required by the relevant specification.6 Information to be given in the relevant specificationThe following details shall be given as far as they are applicable.7 Information to be given in the test reportAs a minimum, the test report shall contain the following information. Items shown in parentheses are examples. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 2423.3-2016 be delivered?Answer: The full copy PDF of English version of GB/T 2423.3-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 2423.3-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2423.3-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 2423.3-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 2423.3-2016?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2423.3-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 2423.3-2016?A step-by-step guide to download PDF of GB/T 2423.3-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 2423.3-2016". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
