GB/T 2397-2012 English PDFUS$169.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 2397-2012: Disperse dyestuffs -- Determination of built up Status: Valid GB/T 2397: Historical versions
Basic dataStandard ID: GB/T 2397-2012 (GB/T2397-2012)Description (Translated English): Disperse dyestuffs -- Determination of built up Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G55 Classification of International Standard: 71.100.01; 87.060.10 Word Count Estimation: 7,733 Older Standard (superseded by this standard): GB/T 2397-2003 Quoted Standard: GB/T 250-2008; GB/T 2374-2007; GB/T 2394-2006; GB/T 4841.1-2006; FZ/T 01024-1993 Regulation (derived from): National Standards Bulletin No. 13 of 2012 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the disperse or melt at high pressure dyeing dyeing lifting force method. This standard applies to disperse dyeing or melt at high temperature and pressure dyeing lifting force measurement. GB/T 2397-2012: Disperse dyestuffs -- Determination of built up---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS71.100.01; 87.060.10 G55 National Standards of People's Republic of China Replacing GB/T 2397-2003 Determination of disperse dyes lifting force Issued on. 2012-06-29 2012-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard rule according to GB/T 1.1-2009 given draft. This standard replaces GB/T 2397-2003 "Determination of disperse dyes lifting force." This standard compared with GB/T 2397-2003, major technical changes in addition to editorial changes outside as follows. --- Increasing the rating methodology (see 7.3.2). Please note that some of the content of this document may involve patents. Issued in this document does not assume responsibility for the identification of these patents. The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standardization Technical Committee Dye (SAC/TC134) centralized. This standard was drafted. Zhejiang Hang Seng Dyeing Co., Ltd., Shenyang Chemical Research Institute Co., Ltd. The main drafters of this standard. Xu Xiaokang, Ma Junqing, Ban Hui. This standard replaces the standards previously issued as follows. --- GB 2397-1980, GB 2397-1986, GB/T 2397-2003. Determination of disperse dyes lifting force1 ScopeThis standard specifies the method for determination of disperse dyes lifting force at high temperature and pressure dyeing or a hot melt dyeing. This standard applies to the determination of disperse dyes lifting force at high temperature and pressure dyeing or a hot melt dyeing.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated edition applies to this article Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 250-2008 textile color fastness test assessing change in color like the gray card (ISO 105-A02.1993, IDT) General conditions GB/T 2374-2007 dye assay provisions Determination of GB/T 2394-2006 disperse shade and intensity GB/T 4841.1-2006 standard depth dyeing color card 1/1 FZ/T01024-1993 discoloration degree of sample instrument rating methodology3 Terms and DefinitionsThe following terms and definitions apply to this document. 3.1 Lifting force buildup Dye on the fiber color depth with the ability to increase the amount of used and promoted. [GB/T 6687-2006, the definition 6.14] Note. The lifting force is represented by grade. Principle 4 In disperse dyeing, the dyeing with increasing depth, dye utilization decreased, to enhance the performance differences in terms of power, that is At higher concentrations of dye, dyed depth increasing trend reduced, so that no longer deepen this standard in order to achieve GB/T 4841.1-2006 Dyeing depth C. were dyed C, 2C, 4C third gear depth dye injection, according to the relevant provisions of GB/T 250-2008 to assess each sample dye Between color changes, depending on the size of the change to assess disperse lifting force. The use according to different dyes, can be hot-melt or high-determination Conduct temperature and high pressure method.5 Reagents and materialsReagents and materials shall comply with the relevant provisions of GB/T 2374-2007 in Chapter 3.6 instruments and equipmentInstruments and equipment shall comply with the relevant provisions of GB/T 2374-2007 in Chapter 4. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 2397-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 2397-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 2397-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2397-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 2397-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2397-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |