GB/T 23766-2009 English PDFUS$459.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 23766-2009: Solid hazardous materials -- General method for the determination of impact sensitivity Status: Valid
Basic dataStandard ID: GB/T 23766-2009 (GB/T23766-2009)Description (Translated English): Solid hazardous materials -- General method for the determination of impact sensitivity Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: R04 Classification of International Standard: 13.300 Word Count Estimation: 20,246 Date of Issue: 2009-05-13 Date of Implementation: 2010-01-01 Adopted Standard: ASTM E680-1979 (2005), MOD Regulation (derived from): PRC National Standard Approval Announcement 2009 No.6 (Total No.146) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard applies to the determination of the relative sensitivity of solid hazardous substances in the drop hammer impact stimuli. This standard applies to equipment operation and impact sensitivity of solid hazardous substances measured. This standard did not mention all the security problems involved in the use of this standard. Any use of this standard has the responsibility to inspection prior to use and to determine the scope defined by the relevant laws and regulations, and to establish appropriate safety, health rules. GB/T 23766-2009: Solid hazardous materials -- General method for the determination of impact sensitivity---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Solid hazardous materials. General method for the determination of impact sensitivity ICS 13.300 R04 National Standards of People's Republic of China Solid hazardous substances Measuring impact sensitivity General Method Posted 2009-05-13 2010-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis revised standard adopts ASTME680. 1979 (2005 was re-approved) of "solid hazardous materials drop hammer impact sensitivity test standard Test method "(in English). This standard is based on ASTME680. 1979 (2005 was re-approved) of "solid hazardous materials drop hammer impact sensitivity Standard Test Law "drafted. Adopting ASTME680. 1979, the standard of this made some changes, the relevant technical differences, structural differences have been incorporated into positive In this paper, and they relate to the terms of the margin with a single vertical line identifies the space. Appendices A, B technical differences and structural differences appendix And a list of reasons for reference. The Standard Appendix A, Appendix B, Appendix C and Appendix D is an informative annex. The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standardization Technical Committee chemical inorganic chemicals Club (SAC/TC63/SC1) centralized. This standard was drafted. People's Republic of China Shandong CIQ, CNOOC Tianjin Chemical Research & Design Institute. The main drafters of this standard. Wang Jun, Yang Pei, Liu Ruo. This standard is the first release. Determination of the impact of solid dangerous substances common sense method1 Scope1.1 Test method for determining the relative sensitivity of solid dangerous substances in the falling weight impact stimuli. 1.2 This standard applies to equipment operation and solid hazardous substances impact sensitivity assay. This standard did not mention the use of this standard involved All security issues. Any use of this standard has the responsibility to review and prior to use to determine the scope of relevant laws and regulations define and establish Appropriate safety and health rules.2 Method summaryIn the mass range of the predetermined impact tool and the impact surface diameter may be used, according to all the tests described in the standard sample Thickness, sample preparation and handling, step test, with the famous Blue Princeton lifting method to drop weight impact test, while using different punch The method of attack means for obtaining standardized data.3 Terms and DefinitionsThe following terms and definitions apply to this standard. 3.1 50% of the height of impact damage, by Bruce Houston lift assay. 3.2 For impact hammer, hit the column, anvil. 3.3 Hammer selected height rise then released, and the direct impingement of sample weight, the impact which the other fixed contact with the sample the column hit. 3.4 Contact with the sample fixed hit column. 3.5 Place a smooth cup containing the sample and the sample or a hard surface. 3.6 Test samples were placed directly on the anvil, the way the test side is not sealed. 3.7 Test samples were placed in a sealed cup (sample container), and then placed in a sealed glass test mode on the anvil. 3.8 Metal sample containers used in limited trials. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 23766-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 23766-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 23766-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 23766-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
