GB/T 23711.8-2019 PDF EnglishUS$115.00 · In stock · Download in 9 seconds
GB/T 23711.8-2019: Test method for pressure vessels lined with plastics -- Part 8: High-resistance testing Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 23711.8-2019: Test method for pressure vessels lined with plastics -- Part 8: High-resistance testing---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT23711.8-2019 NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 71.120;83.140 G 94 Replacing GB/T 23711.8-2009 Test method for pressure vessels lined with plastics - Part 8: High-resistance testing ISSUED ON: DECEMBER 10, 2019 IMPLEMENTED ON: NOVEMBER 01, 2020 Issued by: State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative references ... 4 3 Principle ... 4 4 Test equipment ... 4 5 Sample ... 5 6 Test method ... 5 7 Test result judgment ... 5 8 Test report ... 6 Appendix A (Informative) High-resistance test report ... 7ForewordGB/T 23711, Test method for pressure vessels lined with plastics, is divided into 8 parts: -- Part 1: Spark testing; -- Part 2: Low-temperature testing; -- Part 3: High-temperature inspection; -- Part 4: Negative pressure inspection; -- Part 5: Cold-hot cycling inspection; -- Part 6: Anti pressure testing; -- Part 7: Leak testing; -- Part 8: High-resistance testing. This Part is the 8th part of GB/T 23711. This Part was drafted in accordance with the rules given in GB/T 1.1-2009. This Part was proposed by China Petroleum and Chemical Industry Federation. This Part shall be under the jurisdiction of National Technical Committee 162 on Non-metallic Chemical Equipment of Standardization Administration of China (SAC/TC 162). The drafting organizations of this Part: Zhejiang Xinli New Material Co. Ltd., Guangzhou Special Pressure Equipment Inspection and Research Institute, Wenzhou Institute of Calibration and Testing for Quality and Technical Supervision, Xi’an Sauron Welding Equipment Co., Ltd., Tianhua Institute of Chemical Machinery & Automation Co., Ltd., Wenzhou Zhaoflon Co., Ltd. The drafters of this Part: Chen Pei, Ding Jinsen, Ying Ren’ai, Yin Peng, Hang Yuhong, Chen Guolong. Test method for pressure vessels lined with plastics - Part 8: High-resistance testing1 ScopeThis Part of GB/T 23711 specifies the principle, test equipment, sample, test method, test result judgment and test report of the high-resistance testing of steel pressure vessels lined with plastics. This Part applies to the high-resistance testing of steel pressure vessels lined with plastics such as rigid polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C), polyethylene (PE), ethylene-tetrafluoroethylene copolymer (ETFE), fluorinated ethylene propylene (FEP), perfluoroalkoxy alkanes (PFA), polytetrafluoroethylene (PTFE), and polyvinylidene difluoride (PVDF), whose container shell material is steel.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document. GB/T 24343, Electrical equipment of industrial machines - Insulation resistance test specifications JJG 690-2003, Verification Regulation of High Insulation Resistance Meters3 PrincipleUse the high resistance meter to measure the resistance value of the sample, so as to determine whether there are defects such as leaks on the sample.4 Test equipment4.1 Test chamber A high-insulation resistance meter (hereinafter referred to as "resistance meter") whose accuracy level is not less than level-5.0 that is specified by JJG 690- 2003 shall be selected; its metrological characteristics shall meet the following requirements: ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 23711.8-2019 be delivered?Answer: The full copy PDF of English version of GB/T 23711.8-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 23711.8-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 23711.8-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 23711.8-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 23711.8-2019?A step-by-step guide to download PDF of GB/T 23711.8-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 23711.8-2019". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
