GB/T 23711.5-2019 PDF EnglishUS$115.00 · In stock · Download in 9 seconds
GB/T 23711.5-2019: Test method for pressure vessels lined with plastics -- Part 5: Cold-hot cycling inspection Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid GB/T 23711.5: Historical versions
Similar standardsGB/T 23711.5-2019: Test method for pressure vessels lined with plastics -- Part 5: Cold-hot cycling inspection---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT23711.5-2019 NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 71.120;83.140 G 94 Replacing GB/T 23711.5-2009 Test method for pressure vessels lined with plastics - Part 5: Cold-hot cycling inspection ISSUED ON: DECEMBER 10, 2019 IMPLEMENTED ON: NOVEMBER 01, 2020 Issued by: State Administration for Market Regulation; Standardization Administration of the People’s Republic of China. Table of ContentsForeword ... 3 1 Scope ... 5 2 Normative references ... 5 3 Test device ... 5 4 Sample ... 6 5 Test method ... 6 6 Test result judgment ... 7 7 Test report ... 8 Appendix A (Informative) Cold-hot cycling test report ... 9ForewordGB/T 23711, Test method for pressure vessels lined with plastics, is divided into 8 parts: -- Part 1: Spark testing; -- Part 2: Low-temperature testing; -- Part 3: High-temperature inspection; -- Part 4: Negative pressure inspection; -- Part 5: Cold-hot cycling inspection; -- Part 6: Anti pressure testing; -- Part 7: Leak testing; -- Part 8: High-resistance testing. This Part is the 5th part of GB/T 23711. This Part was drafted in accordance with the rules given in GB/T 1.1-2009. This Standard replaces GB/T 23711.5-2009, Expansion and contraction test method for pressure vessels lined with fluoroplastics; compared with GB/T 23711.5-2009, the main technical changes, except editorial changes, are as follows: -- In "Scope", add plastic lining materials such as rigid polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C), polyethylene (PE) (see Chapter 1); -- Modify the schematic diagram of the testing machine (see Figure 1, Figure 1 of version 2009); -- Add requirements for safety protection of the testing machine (see 3.2); -- Add requirements for the sample dimensions (see Chapter 4, Chapter 4 of version 2009); -- Remove requirements for the thermometer and the operating temperature of the to-be-inspected pressure vessel (see 5.2 of version 2009); -- Add the heating temperature of plastic lining materials such as PVC-U, PVC-C and PE (see Table 1, Table 1 of version 2009); Test method for pressure vessels lined with plastics - Part 5: Cold-hot cycling inspection1 ScopeThis Part of GB/T 23711 specifies the test device, sample, test method, test result judgment and test report of the cold-hot cycling inspection of steel pressure vessels lined with plastics. This Part applies to the cold-hot cycling inspection of steel pressure vessels lined with plastics such as rigid polyvinyl chloride (PVC-U), chlorinated polyvinyl chloride (PVC-C), polyethylene (PE), ethylene-tetrafluoroethylene copolymer (ETFE), fluorinated ethylene propylene (FEP), perfluoroalkoxy alkanes (PFA), polytetrafluoroethylene (PTFE), and polyvinylidene difluoride (PVDF), whose container shell material is steel.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document. GB/T23711.1, Test method for pressure vessels lined with plastics - Part 1: Spark testing3 Test device3.1 The schematic diagram of the cold-hot cycling test machine is shown in Figure 1. The purpose of the test is to verify the ability of the plastic lining to withstand sudden cold and sudden heat. Note: After 20 times of cold-hot cycling, water bubbles that are generated on the surface of PFA, PTFE, FEP will not affect the performance of the plastic lining and are not considered to be ineffective. 6.2 Use naked eyes to observe the sample; when there is no failure, perform a spark testing according to the method that is specified in GB/T 23711.1. If the spark testing is qualified, determine the cold-hot cycling test of the sample at the test temperature to be qualified.7 Test report7.1 The test report shall include the following: a) the name of the manufacturer; b) product name, product batch number, model specifications; c) plastic lining material name and thickness; d) standard on which the test is based; e) testing machine model and heating temperature; f) thermometer range, indication error, steam pressure; g) heating and cooling processes description and curves; h) test result. 7.2 For the format of the test report, see Appendix A. ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 23711.5-2019 be delivered?Answer: The full copy PDF of English version of GB/T 23711.5-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 23711.5-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 23711.5-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 23711.5-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.Question 5: Should I purchase the latest version GB/T 23711.5-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 23711.5-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.How to buy and download a true PDF of English version of GB/T 23711.5-2019?A step-by-step guide to download PDF of GB/T 23711.5-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 23711.5-2019". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
